Manual del usuario del chasis de torre media de vidrio templado con flujo de aire Corsair 480T RGB

1. Introducción

The Corsair 480T RGB is a mid-tower ATX computer case designed for optimal airflow and component visibility. It features a spacious interior, a high-airflow front panel, and tempered glass side panel. This manual provides instructions for the assembly, operation, and maintenance of your Corsair 480T RGB case.

Imagen 1.1: Vista frontal view of the Corsair 480T RGB case, showcasing the perforated front panel with three illuminated RGB fans and the tempered glass side panel.

2. Características principales

• High Airflow Front Panel: Features a well-perforated design to ensure efficient air intake for cooling components.
• Potencial de enfriamiento extremo: Supports up to 7x 120mm or 4x 140mm cooling fans. Accommodates multiple radiators, including a 360mm radiator in the front or roof.
• Three AR120 RGB Fans Included: Comes with three AR120 RGB fans, each equipped with eight RGB LEDs, controllable via a 3-pin ARGB motherboard adapter.
• E/S del panel frontal: Provides convenient access to 2x USB 3.2 Gen 1 Type-A ports, 1x USB 3.2 Gen 2 Type-C port, a microphone jack, and an audio jack.
• Capacidad de almacenamiento: Offers mounts for up to three SSDs.
• Panel lateral de vidrio templado sin herramientas: Allows for easy access to internal components and showcases your build.

Imagen 2.1: Primer plano view of the Corsair 480T RGB's high airflow front panel, highlighting the perforated design and the included AR120 RGB fans.

Image 2.2: Diagram illustrating the cooling potential of the Corsair 480T RGB, showing fan and radiator placements for 120mm, 140mm, 280mm, and 360mm sizes.

3. Exceso de físicoview

Familiarize yourself with the various parts of the Corsair 480T RGB case.

• Panel frontal: Perforated for airflow, houses three AR120 RGB fans.
• Panel superior Features a magnetic dust filter and additional fan/radiator mounts.
• Panel trasero: Includes motherboard I/O cutout, PCIe expansion slots, and an exhaust fan mount.
• Panel lateral izquierdo: Tempered glass for component visibility.
• Panel lateral derecho: Solid panel for cable management.
• Puertos de E/S frontales: Power button, reset button, 2x USB 3.2 Gen 1 Type-A, 1x USB 3.2 Gen 2 Type-C, audio/mic jacks.

Imagen 3.1: Frente directo view of the Corsair 480T RGB case, showing the three illuminated AR120 RGB fans behind the perforated panel and the top I/O ports.

Imagen 3.2: Trasera view of the Corsair 480T RGB case, displaying the motherboard I/O cutout, PCIe expansion slots, and the rear exhaust fan mount.

4. Configuración e instalación

Follow these steps to install your components into the Corsair 480T RGB case.

4.1. Preparación del caso

1. Coloque el estuche sobre una superficie plana y estable.
2. Remove the tempered glass side panel by unscrewing the captive thumbscrews at the rear and carefully pulling the panel away.
3. Remove the solid right side panel by unscrewing the captive thumbscrews at the rear.

Imagen 4.1: Interior view of the Corsair 480T RGB case with both side panels removed, showing the spacious layout for component installation.

4.2. Instalación de la placa base

1. Instale el protector de E/S (si corresponde) en la abertura trasera de la carcasa.
2. Align your ATX motherboard with the pre-installed standoffs. Ensure all screw holes align.
3. Asegure la placa base con los tornillos proporcionados.

4.3. Instalación de la unidad de almacenamiento

The case supports up to three SSDs.

1. Locate the SSD mounting brackets behind the motherboard tray or in the PSU shroud area.
2. Mount your 2.5-inch SSDs onto these brackets and secure them with screws.
3. Slide the brackets back into their designated slots.

4.4. Instalación de la fuente de alimentación (PSU)

1. Slide your PSU into the dedicated compartment at the bottom rear of the case.
2. Alinee la fuente de alimentación con los orificios para tornillos en la parte trasera de la carcasa.
3. Asegure la fuente de alimentación con tornillos.

4.5. Instalación de la tarjeta gráfica (GPU)

El caso ofrece ample room for graphics cards up to 400mm long.

1. Retire las cubiertas de las ranuras PCIe necesarias de la parte trasera de la carcasa.
2. Inserte su tarjeta gráfica en la ranura PCIe correspondiente de su placa base.
3. Asegure la tarjeta gráfica con tornillos.

Imagen 4.2: Interno view of the Corsair 480T RGB case, demonstrating the clearance for graphics cards up to 400mm in length.

4.6. Instalación del ventilador y del radiador

The case supports various fan and radiator configurations. Refer to Image 2.2 for detailed placements.

1. Mount additional fans or radiators to the designated spots (front, top, rear) using appropriate screws.
2. Connect fan power cables and RGB cables to your motherboard or a fan controller.

4.7. Conexiones de E/S frontales

Conecte los cables del panel frontal a la placa base:

• USB 3.2 Gen 1 Type-A (2x)
• USB 3.2 Gen 2 Type-C (1x)
• HD Audio (for microphone and audio jacks)
• Interruptor de encendido, interruptor de reinicio, LED de encendido, LED del disco duro

4.8. Gestión de cables

Utilice los recortes de enrutamiento de cables y los puntos de amarre detrás de la bandeja de la placa base para administrar los cables para una construcción limpia y un mejor flujo de aire.

Imagen 4.3: View of the Corsair 480T RGB from the right side, showing the space behind the motherboard tray for cable routing and management.

5. Instrucciones de funcionamiento

After all components are installed and connected, replace the side panels.

1. Connect your monitor, keyboard, mouse, and power cable to the rear of your system.
2. Press the power button on the front I/O panel to turn on your computer.
3. The AR120 RGB fans will illuminate, and your system should boot.
4. Use the front USB ports for connecting peripherals or external storage devices.

6. Mantenimiento

El mantenimiento regular ayuda a garantizar un rendimiento óptimo y la longevidad de la carcasa de su computadora.

6.1. Limpieza del filtro de polvo

The Corsair 480T RGB includes removable dust filters to prevent dust buildup inside the case.

• Filtro superior: The top magnetic dust filter can be easily lifted off for cleaning.
• Filtro frontal: The front panel can be removed to access the front dust filter for cleaning.
• Filtro inferior: A removable dust filter is located under the PSU intake. Slide it out from the rear for cleaning.

Clean dust filters periodically using compressed air or by rinsing with water (ensure they are completely dry before reinstallation).

Imagen 6.1: Primer plano view of the top magnetic dust filter on the Corsair 480T RGB, shown partially lifted for removal and cleaning.

6.2. Limpieza General

Limpie el exterior del estuche con un paño suave.amp Paño. Evite limpiadores abrasivos o disolventes.

7. Solución de problemas

Esta sección aborda problemas comunes que podrías encontrar.

• El sistema no se enciende:
  • Asegúrese de que la fuente de alimentación esté encendida y conectada correctamente a la toma de pared.
  • Verifique que todos los cables de alimentación (ATX de 24 pines, CPU, GPU) estén conectados de forma segura a la placa base y a los componentes.
  • Verifique que el cable del interruptor de encendido del panel frontal esté conectado correctamente al encabezado del panel frontal de la placa base.
• Los ventiladores no giran / La iluminación RGB no se enciende:
  • Confirme que los cables de alimentación del ventilador estén conectados a la placa base o al controlador del ventilador.
  • Ensure ARGB cables are properly connected to a compatible 3-pin ARGB header on your motherboard.
  • Check your motherboard's BIOS/UEFI or software for fan speed and RGB control settings.
• Flujo de aire deficiente / Altas temperaturas:
  • Limpie todos los filtros de polvo como se describe en la sección Mantenimiento.
  • Ensure fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
  • Verifique que no haya cables que obstruyan el flujo de aire dentro de la carcasa.
• Los puertos USB frontales no funcionan:
  • Check that the USB 3.2 Gen 1 and Gen 2 Type-C cables from the front panel are securely connected to the corresponding headers on your motherboard.

8. Especificaciones

9. Garantía y soporte

This Corsair product is covered by a Garantía de 2 años.

For technical support, warranty claims, or further assistance, please visit the official Corsair support webSitio web o contacte con el departamento de atención al cliente. Conserve su comprobante de compra para validar la garantía.

Para obtener más información, puede visitar el Corsair Store on Amazon.