INTELAMP Solar Outdoor Light with Motion Sensor and Remote Control

Producto terminadoview

El INTELAMP Solar Outdoor Light is designed to provide efficient and reliable illumination for various outdoor spaces. It features a high-efficiency monocrystalline silicon solar panel, a 12500mAh lithium iron phosphate battery, and a powerful 3000LM output. Equipped with a dual PIR motion sensor and remote control, this light offers multiple lighting modes and intelligent linkage capabilities for enhanced security and convenience. Its durable, IP65 waterproof construction ensures performance in diverse weather conditions.

Figura 1: INTELAMP Solar Outdoor Light with remote control.

Características principales

• High Brightness & Long Duration: 3000 lumens output, comparable to a 200W incandescent bulb, powered by a 12500mAh battery for extended illumination.
• Panel solar ajustable: Unique design allows the solar panel angle to be adjusted for optimal sunlight absorption and charging efficiency.
• Sensores de movimiento PIR duales: Detects movement over a wider 180-degree range, up to 10-16 meters, offering enhanced security.
• Cuatro modos de iluminación: Customizable lighting options to suit various needs and preferences.
• Iluminación de gran angular: 240° wide-angle lighting design covers a larger area.
• Control remoto inteligente: Allows for power on/off, brightness adjustment, mode selection, and setting motion-activated high brightness delays (30s, 45s, 60s).
• Enlace inteligente: Cuando un INTELAMP light detects motion, it can activate other nearby INTELAMP lights within a 30-meter range, providing comprehensive coverage.
• Resistente al agua IP65: Constructed with a high-quality die-cast alloy lamp holder, ensuring durability and normal operation in all seasons and extreme weather.

Figure 2: Comparison highlighting larger solar panel, battery, and brightness of the INTELAMP luz.

Figure 3: Illustration of the 180-degree detection angle and extended range of the dual PIR sensors.

Contenido del paquete

Por favor revise el paquete para ver los siguientes artículos:

• INTELAMP Solar Outdoor Light (1 unit)
• Mando a distancia (1 unidad)
• Tornillos de montaje y tacos de pared
• Manual de usuario (este documento)

Figure 4: Components of the INTELAMP Solar Outdoor Light, including the large solar panel, dual sensors, and remote control.

Instrucciones de seguridad

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily for optimal charging.
• Avoid installing the light under streetlights or other strong light sources at night, as this may interfere with the light sensor and prevent it from turning on.
• No desmonte ni modifique el producto. Las modificaciones no autorizadas pueden anular la garantía y suponer riesgos de seguridad.
• Keep the product away from fire and extreme temperatures.
• Deseche la batería de forma responsable según las regulaciones locales.
• Always use appropriate safety gear when installing the light, especially when working at heights.

Configuración e instalación

1. Elección de la ubicación de instalación

Select a location where the solar panel can receive maximum direct sunlight throughout the day. Ensure there are no obstructions like trees, buildings, or eaves that might shade the panel. The ideal installation height is typically 2-4 meters (6.5-13 feet) for optimal motion detection and light coverage.

2. Adjusting the Solar Panel Angle

The solar panel's angle can be adjusted to maximize sunlight exposure. Loosen the adjustment screws, position the panel to face the sun, and then tighten the screws securely. There are three adjustable levels to optimize charging efficiency.

Figure 5: The solar panel can be adjusted to optimize sunlight absorption.

3. Montaje de la luz

The light can be mounted on a wall or a pole. Use the provided screws and wall plugs for secure installation. For wall mounting, drill holes at the marked positions, insert the wall plugs, and then secure the bracket with screws. For pole mounting, use appropriate straps or clamps (not included) to attach the light securely to the pole.

Figura 6: Examples of wall and pole installation, demonstrating versatility for various outdoor settings.

Figure 7: The solar light is suitable for various applications such as garages, gardens, and fences.

Instrucciones de funcionamiento

Funciones del control remoto

The included remote control allows for easy adjustment of the light's settings.

• ENCENDIDO/APAGADO: Enciende o apaga la luz.
• Selección de modo: Choose from 4 distinct lighting modes (refer to the specific mode descriptions below).
• Ajuste de brillo: Ajuste la intensidad de la luz (por ejemplo, 50%, 75%, 100%).
• Retardo del sensor de movimiento: Set the duration for high brightness after motion detection (30s, 45s, or 60s).
• Iluminación continua: Activates a continuous lighting mode without motion detection.

Figure 8: The INTELAMP Solar Outdoor Light shown with its remote control, illustrating the various control options.

Modos de iluminación

The light offers 4 modes to suit different security and illumination needs:

1. Modo 1 (solo sensor de movimiento): The light remains off until motion is detected, then turns on at full brightness for a set duration (30/45/60 seconds) before turning off again.
2. Modo 2 (Luz tenue + Sensor de movimiento): The light stays on at a dim level and brightens to full intensity when motion is detected. After the set delay, it returns to dim light.
3. Mode 3 (Continuous Dim Light): The light stays on at a continuous dim level throughout the night, without motion detection.
4. Mode 4 (Intelligent Linkage): When one light detects motion, it signals other INTELAMP lights within 30 meters to also activate, providing synchronized illumination. This mode requires multiple INTELAMP lights of this type.

Mantenimiento

• Limpieza: Limpie regularmente el panel solar con un paño suave y seco.amp Paño para eliminar el polvo, la suciedad o los residuos. Un panel limpio garantiza una carga óptima.
• Cuidado de la batería: The integrated lithium iron phosphate battery is designed for long life. Avoid prolonged storage in a completely discharged state. If storing for an extended period, ensure the battery is partially charged.
• Inspección: Periodically check the mounting hardware to ensure the light remains securely attached.
• Factores ambientales: While IP65 waterproof, heavy snow accumulation on the solar panel should be cleared to allow for charging.

Solución de problemas

Presupuesto

• Marca: INTELAMP
• Modelo: 12500mAh 3000LM
• Color: Negro
• Material: abdominales
• Estilo: Moderno
• Tipo de fuente de luz: CONDUJO
• Número de LED: 142
• Flujo luminoso: 3000 lm (Note: Product description states 3000LM, specifications state 2000 lm. Using 3000LM as per product title and feature bullets for consistency, but noting the discrepancy.)
• Fuerza: 20 vatios
• Volumentage: 3.2 voltios (CC)
• Batería: Fosfato de hierro y litio de 12500 mAh
• Panel solar: Monocrystalline Silicon, adjustable angle
• Sensor de movimiento: Dual PIR, 180° detection angle, 10-16 meters range
• Método de control: Mando a distancia
• Nivel de resistencia al agua: IP65 resistente al agua
• Dimensiones (L x An x Al): 46 de largo x 19 de ancho x 5.5 de alto cm
• Peso del producto: 1.8 kilogramos
• Requiere ensamblaje: Sí
• Tipo de montaje: Montaje en pared, montaje en poste
• Usos específicos: Terrace, Garage, Garden, Street, Outdoor Security

Garantía y soporte

INTELAMP products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact details provided with your purchase or visit the official INTELAMP webSitio web. Conserve su comprobante de compra para reclamaciones de garantía.

Para obtener más ayuda, también puedes contactar directamente al vendedor a través de la plataforma donde compraste el producto.