ZeroKor Solar Generator with Panel

1. Introducción

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ZeroKor Solar Generator system. This system combines a 300W portable power station with a 40W foldable solar panel, designed to provide reliable power for various applications, including home use, outdoor activities, RV life, and emergency situations.

2. Instrucciones de seguridad

Lea y comprenda todas las advertencias e instrucciones de seguridad antes de usar este producto. El incumplimiento de estas instrucciones podría provocar descargas eléctricas, incendios, lesiones graves o daños materiales.

• No desmonte, repare ni modifique la unidad. Un montaje incorrecto podría provocar un incendio o una descarga eléctrica.
• No exponga la unidad al fuego ni a temperaturas extremas.
• Do not use or store the unit in high temperature environments, such as direct sunlight or inside a vehicle in hot weather.
• Do not use or store the unit in wet environments or near water.
• Keep the unit clean and dry. Wipe with a dry cloth only.
• Asegúrese de que haya una ventilación adecuada durante el uso para evitar el sobrecalentamiento. No obstruya las aberturas de ventilación.
• Mantener fuera del alcance de los niños y las mascotas.
• Evite dejar caer o someter la unidad a impactos fuertes.
• Do not use the power station to power appliances exceeding 300W. This can damage the unit. Examples of restricted devices include coffee makers, induction cookers, microwave ovens, electric kettles, electric grills, hair dryers, water pumps, and industrial fans.
• When charging with the solar panel, ensure the panel is placed in direct sunlight and is not shaded.

3. Contenido del paquete

Verifique que todos los artículos estén incluidos en su paquete:

• Estación de energía portátil ZeroKor de 300 W
• ZeroKor 40W Foldable Solar Panel
• AC Wall Adapter (Charging Cable)
• Cable de carga para coche
• Manual de usuario

4. Producto terminadoview

The ZeroKor Solar Generator system provides versatile power solutions. Below are key components and features of the power station and solar panel.

Figura 4.1: The ZeroKor 300W Portable Power Station and 40W Foldable Solar Panel, ready for use.

Figura 4.2: The portable power station can be charged via AC wall adapter (included), car charging cable (included), or a solar panel (included in this bundle). The image shows the power station connected to a portable refrigerator, demonstrating its versatility for outdoor use.

Figura 4.3: The 40W solar panel features a 22% monocrystalline solar panel conversion rate, offering efficient solar energy capture compared to traditional panels.

Figura 4.4: The 40W solar panel is designed to be lightweight (4.2 lbs / 1.9 kg) and compact, folding into a bag for easy portability. Dimensions are 13.6 inches by 9.8 inches when folded, and 41.2 inches by 13.6 inches when unfolded.

Figura 4.5: The solar panel features a DC Output (12-15V/2.6A max) for charging the power station and a USB QC3.0 Output (5V/3A, 9V/2A, 12V/1.5A max) for direct charging of small devices.

Figura 4.6: The power station is equipped with a Battery Management System (BMS) providing multiple protections including short circuit, over-current, over-voltage, protección contra sobrecarga, sobrecalentamiento y sobrecarga.

Figura 4.7: The power station includes a built-in LED flashlight with multiple modes: Steady for continuous illumination, Strobes for signaling, and SOS for emergency situations.

Figura 4.8: Visual guide indicating appliances that exceed the 300W power limit of the power station, such as coffee makers, induction cookers, microwave ovens, electric kettles, electric grills, hair dryers, water pumps, and industrial fans.

5. Configuración

Before first use, it is recommended to fully charge your ZeroKor Portable Power Station.

5.1 Carga inicial

1. Connect the AC wall adapter to the DC input port on the power station.
2. Plug the AC wall adapter into a standard wall outlet.
3. The battery indicator on the display will show charging progress. The unit is fully charged when the battery icon is full.

5.2 Configuración del panel solar

1. Despliega el panel solar de 40 W y colócalo bajo la luz solar directa.
2. Adjust the angle of the solar panel using its kickstand to maximize sun exposure.
3. Connect the DC output cable from the solar panel to the DC input port on the power station.
4. The power station display will indicate that it is receiving a charge from the solar panel.

6. Instrucciones de funcionamiento

6.1 Encendido / Apagado

Press and hold the main power button for a few seconds to turn the power station on or off. The display will illuminate when the unit is on.

6.2 Uso de tomas de corriente CA

The power station has 2 x 110V/300W MAX AC Outlets.

1. Press the AC button to activate the AC output. The AC indicator on the display will light up.
2. Plug your appliance (within 300W) into the AC outlet.
3. After use, press the AC button again to turn off the AC output and conserve battery.

6.3 Using DC & USB Outputs

The power station includes 1 x DC (9V~12.6V/10A MAX), 3 x 5V/3A MAX USB ports, and 1 x QC USB port (5V/3A 9V/2A Max).

1. Press the DC button to activate the DC output. The DC indicator on the display will light up.
2. Plug your devices into the appropriate DC or USB ports.
3. After use, press the DC button again to turn off the DC output and conserve battery.

Linterna LED 6.4

The power station features a built-in LED flashlight.

• Presione el botón de la linterna una vez para obtener una luz fija.
• Presione nuevamente para el modo estroboscópico.
• Presione una tercera vez para el modo SOS.
• Presione una cuarta vez para apagar la linterna.

7. Carga de la central eléctrica

Your ZeroKor Portable Power Station can be charged using multiple methods:

7.1 Carga de pared de CA

Use the included AC wall adapter. A full charge typically takes approximately 7 hours.

7.2 Carga del coche

Use the included car charging cable to charge the power station from your vehicle's 12V cigarette lighter port.

7.3 Carga solar

Connect the 40W solar panel to the DC input port of the power station. Charging time will vary depending on sunlight intensity and angle. For optimal charging, ensure the solar panel is positioned directly towards the sun and is free from shadows.

8. Mantenimiento

Proper maintenance ensures the longevity and optimal performance of your ZeroKor Solar Generator system.

• Limpieza: Utilice un paño suave y seco para limpiar la central eléctrica y el panel solar. No utilice limpiadores abrasivos ni disolventes.
• Almacenamiento: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the unit to 50-80% every 3-6 months to maintain battery health.
• Cuidado de la batería: Avoid fully discharging the battery frequently. Recharge the unit as soon as possible after use.
• Panel solar: Mantenga la superficie del panel solar limpia de polvo, suciedad y residuos para garantizar la máxima eficiencia de carga.

9. Solución de problemas

If you encounter issues with your ZeroKor Solar Generator, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact ZeroKor customer support.

10. Especificaciones

11. Garantía y soporte

ZeroKor products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official ZeroKor website. If you require technical assistance, troubleshooting beyond this manual, or have questions about your product, please contact ZeroKor customer support through their official channels.