Manual del usuario del cable de carga magnético HIFI WALKER T10 Air

1. Introducción

This manual provides essential instructions for the proper use and maintenance of your HIFI WALKER T10 Air Magnetic Charging Cable. Please read this guide thoroughly before using the product to ensure optimal performance and longevity.

2. Producto terminadoview

2.1 ¿Qué hay en la caja?

• 2 x HIFI WALKER T10 Air Magnetic Charging Cables

2.2 Características principales

• Fijación magnética: Ensures a secure and reliable connection for charging.
• 4-Pin Interface: Specifically designed for compatibility with HIFI WALKER T10 Air Bone Conduction Headphones.
• Conectividad USB: Standard USB-A connector for broad compatibility with power sources.
• Durable TPE Cable: Constructed with Thermoplastic Elastomer (TPE) for flexibility and durability.
• Longitud óptima: Approximately 2 feet (62.5 cm) for convenient use.

Image 1: Magnetic attachment mechanism for the charging cable. The diagram illustrates how the magnetic pins align with the headphone's charging port.

Imagen 2: Detallada view of the 4-pin magnetic connector, highlighting its design and contact points.

3. Configuración

To set up your HIFI WALKER T10 Air Magnetic Charging Cable, follow these steps:

1. Identificar componentes: Locate the USB-A end of the charging cable and the magnetic 4-pin connector end.
2. Conéctese a la fuente de alimentación: Insert the USB-A end of the cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank. Ensure the power source is functional.
3. Conectar a los auriculares: Align the magnetic 4-pin connector with the charging port on your HIFI WALKER T10 Air Bone Conduction Headphones. The magnetic connection will automatically snap into place. Ensure the pins are correctly aligned for a secure connection.

Image 3: The HIFI WALKER T10 Air headphones are shown connected to a laptop via the magnetic charging cable, illustrating a typical charging setup.

4. Instrucciones de funcionamiento

Once the cable is securely connected to both a power source and your HIFI WALKER T10 Air headphones, charging will commence automatically. The charging status is typically indicated by an LED light on your headphones (refer to your headphone's manual for specific LED indicators).

• Tiempo de carga: Charging duration varies based on the headphone's battery level and the power output of the USB source.
• Transferencia de datos: This cable is primarily designed for charging. While some data transfer may be possible, its primary function is power delivery.

5. Mantenimiento

Proper care of your charging cable will extend its lifespan:

• Limpieza: Gently wipe the cable and magnetic connectors with a dry, soft cloth to remove dust or debris. Avoid using liquid cleaners directly on the connectors.
• Almacenamiento: Guarde el cable en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas. Evite enrollarlo demasiado para evitar dañar los cables internos.
• Manejo: Sujete siempre los extremos del conector al conectar o desconectar el cable. Evite tirar del cable, ya que podría dañar el cableado interno.

6. Solución de problemas

Si tiene problemas con el cable de carga, considere lo siguiente:

• Los auriculares no se cargan:
  • Asegúrese de que el extremo USB-A esté completamente insertado en una fuente de alimentación que funcione.
  • Verify the magnetic 4-pin connector is securely attached and correctly aligned with the headphone's charging port.
  • Pruebe con una fuente de alimentación o puerto USB diferente.
  • Inspect the cable for any visible damage (frays, bends, or broken connectors). If damaged, discontinue use.
• Conexión suelta:
  • Ensure there is no debris on the magnetic contacts of either the cable or the headphones.
  • Confirm the cable is designed for your specific HIFI WALKER T10 Air headphones.

7. Especificaciones

Image 4: The charging cable is displayed with its length clearly marked as 2 feet (62.5 cm).

8. Garantía y soporte

For warranty information and customer support, please refer to the documentation included with your original purchase or contact HIFI WALKER customer service directly through their official websitio o el minorista donde se compró el producto.

Conserve su comprobante de compra para reclamos de garantía.