Dispensador de bebidas de vidrio Navaris con grifo - Diseño ondulado de 4 l Manual de usuario

1. Introducción

Thank you for choosing the Navaris Glass Drink Dispenser. This 4-liter (1 gallon) ripple design beverage dispenser is crafted from high-quality glass and features a stainless steel tap, an ice insert, and a fruit infuser. It is designed for serving a variety of cold beverages such as water, juice, iced tea, and cold brew coffee. This manual provides essential information for the safe and effective use of your dispenser.

Please read these instructions carefully before first use and retain them for future reference.

2. Contenido del paquete

• 1x Glass Drink Dispenser (4L capacity)
• 1x Stainless Steel Tap
• 1x tapa
• 1x Ice Insert
• 1x Fruit Infuser Insert

Image 2.1: All components of the Navaris Glass Drink Dispenser, including the main glass jar, the metal lid, the stainless steel tap, the clear plastic ice insert, and the clear plastic fruit infuser insert.

3. Configuración y montaje

Before first use, wash all components thoroughly with warm soapy water and rinse well. Ensure all parts are completely dry before assembly.

3.1 Assembling the Tap

1. Locate the tap, two silicone washers, and one nut.
2. Insert one silicone washer onto the threaded part of the tap.
3. From the outside of the dispenser, insert the threaded part of the tap into the hole.
4. From the inside of the dispenser, place the second silicone washer onto the threaded part of the tap.
5. Screw the nut onto the threaded part of the tap from the inside.
6. Hand-tighten the nut firmly to create a watertight seal. Avoid over-tightening with tools, as this may damage the glass.
7. After assembly, fill the dispenser with water and check for leaks before adding your desired beverage. If a leak occurs, tighten the nut slightly more.

Image 3.1: Detail of the stainless steel tap and the internal filter screen, which helps prevent clogging from fruit pulp or ice.

4. Instrucciones de funcionamiento

4.1 Llenado del dispensador

1. Unscrew the metal lid from the top of the glass dispenser.
2. Pour your desired cold beverage into the dispenser. The wide mouth allows for easy filling.
3. If using the ice insert or fruit infuser, place them into the dispenser before or after filling, as desired.
4. Securely screw the lid back onto the dispenser.

4.2 Using the Ice Insert

The ice insert is designed to keep your drinks chilled without diluting them.

1. Fill the clear plastic ice insert with ice cubes.
2. Carefully lower the filled ice insert into the center of the dispenser. It will rest securely inside.

4.3 Using the Fruit Infuser Insert

The fruit infuser allows you to add natural flavors to your beverages with minimal pulp.

1. Cut fruits, vegetables, or herbs into small pieces suitable for the infuser.
2. Place the prepared ingredients into the clear plastic fruit infuser insert.
3. Carefully lower the filled fruit infuser into the center of the dispenser.
4. Allow sufficient time for the flavors to infuse into the beverage.

4.4 Dispensación de bebidas

1. Place a glass or cup under the tap.
2. Push the tap handle upwards to open the flow.
3. Release the tap handle to close the flow.

Image 4.1: Demonstrating the pouring action from the dispenser's tap into a glass.

5. Mantenimiento y limpieza

Regular cleaning ensures hygiene and extends the life of your dispenser.

1. Desmontaje: Unscrew the lid and remove any inserts. Carefully remove the tap by unscrewing the nut from the inside and pulling the tap out.
2. Lavado: Wash all glass and plastic components with warm, soapy water. Use a bottle brush for the interior of the dispenser if needed. The wide mouth facilitates easy cleaning.
3. Limpieza de grifos: Ensure the tap is thoroughly cleaned, especially the internal mechanism, to prevent residue buildup.
4. Enjuague: Enjuague bien todas las piezas con agua limpia para eliminar todos los residuos de jabón.
5. El secado: Allow all components to air dry completely before reassembly or storage. Pay special attention to drying the metal lid and tap components to prevent potential rusting.
6. Almacenamiento: Store the dispenser in a clean, dry place.

6. Solución de problemas

7. Especificaciones

Image 7.1: Visual representation of the dispenser's dimensions and the included inserts.

8. Garantía y soporte

For warranty information or technical support, please refer to the product packaging or contact Navaris customer service directly. Keep your purchase receipt as proof of purchase.