Vtopek H11 Solar TPMS: 3.5-inch Wireless Tire Pressure Monitoring System User Manual

1. Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your Vtopek H11 Solar Tire Pressure Monitoring System (TPMS). This system is designed to monitor tire pressure and temperature in real-time, enhancing driving safety for both 2-wheel (trailer) and 4-wheel (car, SUV, van) vehicles.

2. Contenido del paquete

Verifique que todos los artículos enumerados a continuación estén incluidos en su paquete:

• TPMS Monitor x 1
• External Sensors x 4
• Soporte extraíble x 1
• Hex Nuts x 4
• Llave x 1
• Cable de carga tipo C x 1
• Pegatinas x 2
• Manual de usuario x 1

Figura 2.1: Contenido del paquete

3. Características principales

• Soporte de modo dual: Compatible with both 2-wheel (trailer) and 4-wheel (car, SUV, van) vehicles.
• Monitoreo de alta precisión: Provides tire pressure readings with 0.01 bar accuracy.
• Separate Alarm Settings: Allows independent high/low pressure alarm value settings for front and rear tires.
• Detachable Monitor: The monitor can be easily detached from its bracket for flexible placement, charging, and settings adjustment.
• Retroiluminación automática: 3-level adjustable backlight for clear visibility in various lighting conditions (daytime, indoor, night).
• Alarmas en tiempo real: Six alarm modes including rapid air leak, high/low pressure, high temperature, sensor data loss, and low battery.
• Suspensión/activación automática: Features vibration detection for automatic power on/off, conserving battery.
• Opciones de carga dual: Supports solar charging and USB Type-C charging.
• Sensores externos duraderos: IP68 waterproof, anti-dust, anti-theft, and suitable for a pressure range of 0.2 to 6.0 bar.

4. Configuración e instalación

4.1 Instalación del monitor

The monitor can be installed on the windshield or dashboard. The detachable bracket allows for flexible positioning and easy removal for charging or adjustments.

1. Attach the removable bracket to the desired location on your windshield or dashboard using the adhesive provided. Ensure the surface is clean and dry.
2. Slide the TPMS monitor onto the bracket. The angle can be adjusted for optimal viewEn.
3. Ensure the monitor does not obstruct your view Mientras conduce.

Figure 4.1: Monitor Installation and Detachable Bracket

4.2 Instalación del sensor

Install the external sensors on your vehicle's tire valves. Each sensor is labeled (FL, FR, RL, RR) for its corresponding tire (Front Left, Front Right, Rear Left, Rear Right).

1. Remove the original valve cap from the tire valve.
2. Screw on a hex nut onto the tire valve.
3. Screw the corresponding sensor (e.g., FL for Front Left) onto the tire valve until it is hand-tight.
4. Apriete la tuerca hexagonal contra el sensor usando la llave provista para asegurarlo y evitar robos.
5. Repita este procedimiento para los cuatro neumáticos.

Figura 4.2: Pasos de instalación del sensor externo

Nota: The sensors are pre-paired with the monitor. If a sensor is replaced, it may need to be re-paired. Refer to the troubleshooting section for pairing instructions.

5. Instrucciones de funcionamiento

5.1 Powering On/Off and Automatic Functions

• Encendido inicial: Press and hold the left button on the monitor for more than 3 seconds to turn it on.
• Despertador automático: The TPMS monitor will automatically turn on when it detects vehicle vibration (e.g., opening a car door, starting the engine).
• Modo de suspensión automático: If no vibration is detected for 5 minutes after parking, the monitor will automatically enter sleep mode to conserve power.

Figure 5.1: Automatic Sleep and Vibration Detection

5.2 Display and Alarm Modes

The 3.5-inch large screen displays real-time tire pressure and temperature for all four tires simultaneously. The system features six alarm modes:

• Rapid Air Leak Alarm: Alerts to sudden and significant pressure drops.
• Alarma de alta presión: Se activa si la presión de los neumáticos excede el límite alto establecido.
• Alarma de baja presión: Activates if tire pressure falls below the set low limit.
• Alarma de temperatura alta: Warns if tire temperature exceeds the set limit.
• Alarma de pérdida de datos del sensor: Indica que un sensor no está transmitiendo datos.
• Alarma de batería baja: Alerts when the monitor or sensor battery is low.

Figure 5.2: Real-time Monitoring and Alarm Modes

5.3 Mode Switching (2-Wheel / 4-Wheel)

The system supports switching between 2-wheel mode (for trailers) and 4-wheel mode (for cars). This allows for accurate monitoring without unnecessary alarms when fewer sensors are active.

• To switch modes, access the system settings (refer to the full manual for specific button sequences).
• Select "2-Wheel Mode" if using only two sensors (e.g., for a trailer).
• Select "4-Wheel Mode" for standard car applications with four sensors.

Figure 5.3: 2-Wheel / 4-Wheel Mode Switching

5.4 Configuración de valores de alarma

This TPMS allows for separate high and low pressure alarm settings for front and rear tires, providing more precise monitoring tailored to your vehicle's requirements.

1. Enter the settings menu on the monitor.
2. Navigate to the alarm value adjustment section.
3. Set the desired high pressure alarm value for the front tires (e.g., 3.45 bar).
4. Set the desired low pressure alarm value for the front tires (e.g., 1.95 bar).
5. Repeat the process for the rear tires, setting their specific high and low pressure alarm values (e.g., 5.85 bar high, 2.55 bar low).
6. Guarde su configuración antes de salir del menú.

Figure 5.4: Separate Front and Rear Wheel Alarm Settings

6. Mantenimiento

6.1 Carga del monitor

The monitor supports two charging methods:

• Carga solar: The integrated solar panel charges the monitor when exposed to sunlight. Ensure the monitor is placed in a location with adequate sun exposure.
• Carga USB tipo C: For cloudy days or when solar charging is insufficient, use the provided USB Type-C cable to charge the monitor via a car charger or other USB power source.

Importante: Charge the monitor for more than 3 hours before its first use. When fully charged, a long press of the left button will turn it on.

Figure 6.1: Solar and USB Type-C Charging

6.2 Reemplazo de la batería del sensor

The external sensors use replaceable CR1632 lithium-polymer batteries. When a low battery alarm for a sensor is triggered, replace its battery.

1. Desatornille el sensor de la válvula del neumático.
2. Abra con cuidado el sensor casing.
3. Retire la batería CR1632 vieja.
4. Inserte una batería CR1632 nueva, asegurando la polaridad correcta.
5. Cerrar el sensor casing and re-install it on the tire valve, following the installation steps in Section 4.2.

7. Solución de problemas

8. Especificaciones

9. Garantía y soporte

Vtopek provides a 1 año de garantía for this TPMS product. For technical support, warranty claims, or any inquiries, please contact our customer service.

• Periodo de garantía: 1 año a partir de la fecha de compra.
• Contacto: Refer to the contact information provided with your product packaging or on the official Vtopek websitio.

Figura 9.1: Información de garantía y soporte