Introducción
Thank you for choosing the KODA Multi-Directional Shop Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED shop lights. Please read these instructions thoroughly before use and retain them for future reference.
Información de seguridad
Siga siempre las precauciones básicas de seguridad al instalar o utilizar productos eléctricos para reducir el riesgo de incendio, descarga eléctrica y lesiones personales.
- Desconectar la energía: Ensure power is turned off at the circuit breaker before installation, maintenance, or cleaning.
- Puesta a tierra adecuada: Este accesorio debe estar conectado a tierra correctamente.
- Electricista calificado: Si no está seguro acerca del proceso de instalación, consulte con un electricista calificado.
- Uso exclusivo en interiores: Este producto está diseñado para uso en interiores y lugares secos. No lo exponga al agua ni a la humedad.
- Temperatura de funcionamiento: Do not operate in temperatures outside the specified range.
- Evite la exposición directa a los ojos: No mire directamente a la fuente de luz LED cuando esté iluminada.
- Linkable Limit: Do not exceed the maximum linkable limit of 6 fixtures.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- 2 x KODA Multi-Directional LED Shop Lights
- Installation Kit (includes hanging chains, S-hooks, V-hooks, mounting screws, wall anchors)
- 2 x 5 ft. Power Cords with ON/OFF Pull Chains
Producto terminadoview
The KODA Multi-Directional Shop Light provides versatile and powerful illumination for various environments. Key features include:
- Iluminación ultrabrillante: Proporciona 8000 lúmenes de luz.
- Selectable Lighting Modes: Choose between Full Brightness, Main Light, or Ambient Lighting.
- Diseño enlazable: Connect up to 6 fixtures in series.
- Montaje versátil: Supports both surface and suspended mounting.
- Eficiencia energética: Energy Star Certified, consuming only 80 watts.
- De larga duración: LED components have a lifespan of up to 50,000 hours.
This image displays two KODA Multi-Directional Shop Lights, showcasing their sleek, rectangular design and how they are typically suspended from a ceiling by chains.
Configuración e instalación
The KODA Multi-Directional Shop Light can be installed using either suspended or surface mounting methods. Ensure power is disconnected before installation.
Suspended Mounting (Recommended for Garages/Workshops)
- Marcar los puntos de montaje: Determine the desired location for your light fixture. Mark two points on the ceiling or overhead structure that align with the mounting holes on the fixture.
- Instalar ganchos de techo: Drill pilot holes at the marked points. Insert wall anchors if mounting into drywall. Screw the ceiling hooks (V-hooks) into the anchors or directly into a sturdy structure.
- Adjuntar cadenas: Connect the hanging chains to the V-hooks on the ceiling and the S-hooks on the fixture. Adjust chain length to achieve the desired hanging height.
- Conecte la electricidad: Plug the 5 ft. power cord into a standard 120V AC outlet.
Montaje en superficie
- Marcar los puntos de montaje: Hold the fixture against the desired mounting surface (ceiling or wall) and mark the locations for the mounting screws.
- Perforar agujeros piloto: Drill pilot holes at the marked locations. Use wall anchors if mounting into drywall.
- Accesorio seguro: Align the fixture with the pilot holes and secure it using the provided mounting screws.
- Conecte la electricidad: Plug the 5 ft. power cord into a standard 120V AC outlet.
Vinculación de múltiples accesorios
Up to 6 KODA Multi-Directional Shop Lights can be linked in series. To link fixtures:
- Ensure all fixtures are securely mounted.
- Connect the power cord of the first fixture to an outlet.
- Use the provided linking cable (if applicable, or an additional power cord) to connect the convenience outlet on the first fixture to the power input of the second fixture.
- Repita esto para accesorios adicionales, hasta un máximo de 6.
Una sobrecarga view of a workshop, brightly lit by multiple KODA Multi-Directional Shop Lights, demonstrating their effectiveness in providing ample illumination for a detailed work environment.
A garage interior featuring KODA Multi-Directional Shop Lights installed above a workbench and storage cabinets, illustrating their application in a typical home garage setting.
Instrucciones de funcionamiento
Once installed and powered, operate your KODA Multi-Directional Shop Light as follows:
- Encendido/apagado: Use the integrated pull chain to turn the light fixture ON or OFF.
- Seleccionar modos de iluminación: The pull chain also cycles through the available lighting modes. Each pull will switch to the next mode:
- Brillo total: Both main and ambient lights are active for maximum illumination (8000 lumens).
- Luz principal: Primary light source is active.
- Iluminación ambiental: Secondary light source is active, providing softer illumination.
This image shows an individual focused on a woodworking task, with a KODA Multi-Directional Shop Light providing clear, direct illumination over the workspace, highlighting the light's utility in task-oriented settings.
Mantenimiento
The KODA Multi-Directional Shop Light requires minimal maintenance due to its long-lasting LED components.
- Limpieza: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry, or slightly damp Paño. No utilice limpiadores abrasivos ni disolventes.
- LED: The LED components are integrated and not user-replaceable. With a lifespan of up to 50,000 hours, frequent replacement is not necessary.
- Inspección: Periodically inspect the power cord and hanging hardware for any signs of damage or wear. Replace damaged components immediately.
Solución de problemas
If you encounter issues with your KODA Multi-Directional Shop Light, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no enciende | No power to the outlet; Power cord not fully plugged in; Circuit breaker tripped; Pull chain not activated. | Check the power outlet with another device; Ensure power cord is securely plugged in; Reset the circuit breaker; Pull the chain to activate the light. |
| La luz parpadea o se atenúa | Loose connection; Voltage fluctuations; Overloaded circuit. | Check all connections; Ensure the fixture is on a stable power supply; Reduce the number of devices on the circuit. |
| Cannot change lighting modes | Pull chain mechanism issue. | Ensure the pull chain is being pulled firmly and released completely. If the issue persists, contact support. |
| Linked fixtures not working | Linking cable not properly connected; Exceeded maximum linked fixtures. | Verify all linking cables are securely connected; Ensure no more than 6 fixtures are linked in series. |
Presupuesto
| Número de modelo | LM030404-2 |
| Marca | Koda |
| Tipo de fuente de luz | LED (diodo emisor de luz) |
| Brillo | 8000 lúmenes |
| Quétage | 80 vatios |
| Volumentage | 120 voltios (CA) |
| Material | Aluminio |
| Color | Blanco |
| Forma | Rectangular |
| Tipo de montaje | Montaje en techo (suspendido o de superficie) |
| Esperanza de vida | Hasta 50,000 horas |
| Certificaciones | Certificado Energy Star |
| Código Postal | 840010304046 |
A technical diagram providing the precise measurements of the KODA Multi-Directional Shop Light, including its length, width, and height in both inches and centimeters, essential for installation planning.
Información de garantía
Specific warranty details for the KODA Multi-Directional Shop Light may vary. Please refer to the product packaging or the official Koda website for the most current warranty policy. Retain your proof of purchase for any warranty claims.
Apoyo
For further assistance, technical support, or inquiries regarding your KODA Multi-Directional Shop Light, please visit the official Koda store or contact Koda customer service.
Koda Store: Visita la tienda Koda en Amazon