Corbero VICTORIA760W
Manual de usuario de la campana decorativa blanca Corberó VICTORIA760W 70 cm
1. Introducción
1.1 producto másview
The Corberó VICTORIA760W decorative hood is designed to enhance your kitchen with both elegance and functionality. Featuring a 70 cm white glass design and 165W power, this appliance seamlessly integrates into modern kitchen aesthetics. It provides efficient smoke and odor extraction with a high airflow capacity of 594.2 m3/h.

Imagen 1.1: Frente view of the Corberó VICTORIA760W 70 cm white decorative hood.
1.2 Características principales
- Potente y eficiente: Offers 165W power and an airflow of 594.2 m3/h for effective smoke and odor removal.
- Diseño elegante: Features white tempered glass, adding a modern and sophisticated touch to any kitchen.
- Control táctil: Intuitive touch controls allow for easy adjustment of the 3 available speed settings.
- Energy Efficiency A: High energy efficiency rating helps reduce electricity consumption.
- Sistema de filtración dual: Includes an aluminum filter and a carbon filter for effective air purification.
2. Configuración e instalación
2.1 Desembalaje
Carefully remove the hood from its packaging. Inspect the unit for any signs of damage during transit. Retain all packaging materials until installation is complete and the unit is confirmed to be in working order.
2.2 Componentes incluidos
- Corberó VICTORIA760W Decorative Hood Unit
Additional installation hardware (screws, wall plugs, ducting) may be included or required separately. Refer to the full installation guide for a complete list.
2.3 Pautas de instalación
This decorative hood is designed for wall-mounted installation. Ensure the mounting surface is structurally sound and capable of supporting the hood's weight. Maintain appropriate clearance distances from the cooking surface as specified in the detailed installation manual to ensure optimal performance and safety. Professional installation is recommended.

Image 2.1: The Corberó VICTORIA760W hood integrated into a kitchen environment.
3. Operación
3.1 Panel de control
The hood features a touch control panel located on the front glass surface. This panel allows for easy selection of extraction speeds and control of the lighting.

Image 3.1: Detail of the touch control interface on the hood.
Configuración de velocidad de 3.2
The hood offers three distinct speed settings to accommodate various cooking needs. Use the touch controls to cycle through the speeds:
- Velocidad 1 (Baja): Ideal para cocinar a fuego lento o de manera ligera, proporcionando un funcionamiento silencioso.
- Velocidad 2 (Media): Suitable for general cooking and moderate steam/odor production.
- Velocidad 3 (Alta): For intense cooking, frying, or when significant smoke and odors are present.
3.3 Iluminación
The integrated LED lighting illuminates your cooking area. Activate or deactivate the lights using the dedicated touch control button. The LED lights are energy-efficient and provide clear visibility.

Imagen 3.2: View of the hood's LED lighting and air intake area.
4. Mantenimiento
Regular maintenance ensures optimal performance and longevity of your Corberó decorative hood.
4.1 Limpieza y reemplazo del filtro
The hood is equipped with an aluminum grease filter and a carbon filter (for recirculation mode).
- Filtro de grasa de aluminio: This filter traps grease particles from cooking fumes. It should be cleaned regularly (e.g., monthly, depending on usage) by hand with warm soapy water or in a dishwasher. Ensure it is completely dry before re-installing.
- Filtro de carbón: If your hood operates in recirculation mode, the carbon filter removes odors from the air. Carbon filters are not washable and must be replaced periodically (typically every 3-6 months, depending on usage). Refer to the full manual for specific replacement instructions and compatible filter models.
4.2 Limpieza de superficies
Clean the exterior surfaces of the hood, especially the tempered glass, with a soft cloth and a mild, non-abrasive cleaning agent. Avoid harsh chemicals or abrasive pads that could scratch the surface. Ensure the hood is switched off and cool before cleaning.
5. Solución de problemas
This section addresses common issues you might encounter with your decorative hood.
- El capó no enciende: Compruebe que el cable de alimentación esté bien enchufado a una toma de corriente que funcione. Verifique que el disyuntor no se haya disparado.
- Bajo rendimiento de extracción: Ensure the filters are clean and not clogged. Check that the ducting is properly installed and free of obstructions. Verify the hood is set to an appropriate speed for the cooking activity.
- Ruido excesivo: Inspect for loose components or improper installation. Ensure filters are correctly seated. If operating in recirculation mode, check the carbon filter for proper installation.
- Las luces no funcionan: Check if the light switch is on. If individual bulbs are replaceable, check if they need replacement.
For issues not resolved by these steps, consult the comprehensive user manual or contact customer support.
6. Especificaciones técnicas
| Especificación | Valor |
|---|---|
| Marca | Corberó |
| Número de modelo | VICTORIA760W |
| Dimensiones del producto (Pr. x An. x Al.) | 42.2 x 70 x 31 cm |
| Peso del producto | 13.5 kilogramos |
| Color | Blanco |
| Material | Vaso |
| Capacidad de flujo de aire | 594.2 m³/h |
| Nivel de ruido | 61 decibelios |
| Tipo de control | Tocar |
| Número de velocidades | 3 |
| Tipo de iluminación | CONDUJO |
| Tipo de filtro | Deflector (Aluminum and Carbon) |
| Tipo de ventilación | Escape |
| Tipo de montaje | Montaje en pared |
| Volumentage | 220.0 V |
| Clase de eficiencia energética | A |

Image 6.1: Energy efficiency label for the Corberó VICTORIA760W hood.
7. Garantía y soporte
For detailed information regarding the product warranty, terms, and conditions, please refer to the warranty card included with your product or visit the official Corberó website. For technical support, spare parts, or service inquiries, please contact Corberó customer service through the channels provided in your product documentation.