1. Introducción
This manual provides instructions for the safe and effective use of your SUNUV SUN9X Plus UV LED Nail LampLea este manual detenidamente antes de utilizar el dispositivo y consérvelo para futuras consultas.
The SUNUV SUN9X Plus is designed for curing various gel nail polishes, including base coats, top coats, color gels, hard gels, builders, acrylics, and sculpture gels. It features a dual UV+LED light source, an automatic sensor, and multiple timer settings for efficient nail curing.
Imagen: Frente view of the SUNUV SUN9X Plus UV LED Nail Lamp, showing the arched design and internal LED lights.
2. Instrucciones de seguridad
Para garantizar un funcionamiento seguro y evitar daños, tenga en cuenta las siguientes precauciones:
- Do not expose eyes or skin directly to the UV/LED light for extended periods.
- Keep the device away from water or other liquids. Do not use in damp entornos.
- Desenchufe el dispositivo cuando no esté en uso o antes de limpiarlo.
- No intente reparar ni modificar el dispositivo usted mismo. Contacte con personal cualificado para obtener servicio técnico.
- Utilice únicamente el adaptador de corriente proporcionado.
- Mantener fuera del alcance de los niños.
- No lo use si el cable de alimentación o el enchufe están dañados.
- This device is intended for curing gel nail polishes only, not for regular nail polish.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- 1 x SUNUV SUN9X Plus Nail Lamp
- 1 adaptador de corriente de 1.5 m
- 1 x Manual de usuario (este documento)
- 1 x Gel Polish Application Manual (may be included separately)
Image: Contents of the SUNUV SUN9X Plus package, including the nail lamp, power adapter, and documentation.
4. Características del producto
- Dual UV+LED Light Source: Cures all types of gel polishes efficiently.
- Sensor automático: El lamp automatically turns on when hands are inserted and off when removed.
- Múltiples configuraciones de temporizador: Includes 30-second and 60-second timer buttons for precise curing.
- Pantalla LCD: Shows the remaining curing time.
- Diseño compacto y portátil: Fácil de transportar y almacenar.
- Gentle on Hands: Designed to minimize heat and discomfort during curing.
Image: Diagram illustrating key features of the SUNUV SUN9X Plus, including 30s and 60s timer settings, smart infrared sensor for automatic operation, and suitability for various gel types.
Image: Visual representation of the smart infrared sensor functionality, showing the lamp activating when a hand is placed inside and deactivating when removed.
5. Configuración
- Desembalaje del SUNUV SUN9X Plus UV LED Nail Lamp y sus accesorios.
- Coloque la lamp sobre una superficie estable y plana.
- Conecte el adaptador de corriente al puerto de entrada de CC en la parte posterior del lamp.
- Conecte el adaptador de corriente a una toma de corriente adecuada.amp Ya está listo para usarse.
Image: The SUNUV SUN9X Plus lamp with its dimensions (4 in. height, 8.2 in. width, 5 in. depth) and the 1.5m power adapter.
6. Operación
Siga estos pasos para un curado efectivo de las uñas de gel:
- Preparar las uñas: Clean and prep your nails according to your gel polish system's instructions. Apply a thin layer of base coat.
- Capa base de curado: Coloque su mano o pie en el lamp. El lamp will automatically turn on. For most base coats, press the 30 segundos button for a 30-second cure. The LCD display will show the countdown.
- Aplicar gel de color: Apply a thin layer of your chosen color gel polish.
- Gel de color curado: Coloque su mano o pie en el lamp. Cure for the recommended time, typically 30 or 60 seconds, depending on the gel polish manufacturer's instructions. Repeat for additional color coats if desired.
- Aplicar capa superior: Apply a thin layer of top coat.
- Capa superior de curado: Coloque su mano o pie en el lamp. For most top coats, press the 60 segundos Botón para un curado de 60 segundos.
- Cleanse (if necessary): If your gel polish system requires it, wipe the cured top coat with a lint-free wipe saturated with isopropyl alcohol to remove any sticky residue and enhance shine.
Using the Automatic Sensor: El lamp features an infrared sensor. Simply place your hand or foot inside the lamp, and it will activate automatically for 99 seconds. To stop, remove your hand or foot. You can override this by pressing a timer button.
Image: A visual guide to the four-step process of using the nail lamp: Prep nails, Cure base coat, Apply color, Cure top coat and wipe for shine.
Image: The SUNUV SUN9X Plus lamp accommodating both hands and feet for manicures and pedicures, highlighting its spacious design.
7. Mantenimiento
Un mantenimiento adecuado garantiza la longevidad y el rendimiento de sus uñas.amp:
- Limpieza: Disconnect the power adapter before cleaning. Wipe the exterior of the lamp with a soft, dry cloth. For stubborn stains, use a slightly damp Limpie el producto con un paño suave y jabón y séquelo. No utilice limpiadores abrasivos ni disolventes.
- Almacenamiento: Almacenar el lamp en un lugar fresco y seco, alejado de la luz solar directa y de la humedad cuando no esté en uso.
- Reemplazo de bombilla: The UV+LED light beads are designed for long-term use and generally do not require replacement. If you experience issues with light output, refer to the troubleshooting section or contact customer support.
8. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Lamp no se enciende. | Adaptador de corriente no conectado o toma de corriente defectuosa. | Asegúrese de que el adaptador de corriente esté conectado de forma segura a la lamp y una toma de corriente que funcione. Prueba con otra toma. |
| El esmalte en gel no se cura correctamente. | Polish applied too thick; incorrect curing time; expired gel polish; incompatible gel polish. | Apply thinner coats of gel polish. Increase curing time as per gel polish manufacturer's recommendations. Ensure gel polish is not expired. Verify compatibility with UV/LED lamps. |
| El sensor automático no funciona. | Sensor obstruido o sucio. | Ensure nothing is blocking the sensor area. Clean the sensor area with a soft, dry cloth. |
| Lamp feels warm during use. | Funcionamiento normal. | A slight warmth is normal. If it becomes excessively hot or causes discomfort, remove hand and allow lamp Enfriar. |
9. Especificaciones
- Nombre del modelo: SUN9X Plus
- Marca: UV solar
- Tipo de fuente de luz: UV+LED (Dual Light Source)
- Quétage: 24 vatios
- Número de fuentes de luz: 18 UV+LED Lightbeads
- Configuración del temporizador: 30s, 60s, 99s (automatic sensor)
- Dimensiones del producto: 8.2 pulgadas (ancho) x 5 pulgadas (profundidad) x 4 pulgadas (alto)
- Peso del artículo: Aproximadamente 14.4 onzas (0.41 kg)
- Material: Plastic (Acrylonitrile Butadiene Styrene, Acrylic)
- Fuente de energía: Eléctrico con cable (adaptador incluido)
- Método de control: Touch buttons, Automatic Sensor
- Código postal: 850052843274
Imagen: Más alláview de la lamp's portable design and key dimensions.
10. Garantía y soporte
SUNUV provides 12 Months Customer Service for this product. For warranty claims, technical support, or any inquiries, please contact SUNUV customer service through the retailer where the product was purchased or visit the official SUNUV websitio.
Para obtener más información, puede visitar el SUNUV Store on Amazon.