Infanti FIX 360 Car Seat Instruction Manual

1. Introducción

Thank you for choosing the Infanti FIX 360 Car Seat. This car seat is designed to provide safety and comfort for your child from birth up to 36 kg, covering Group 0+, 1, 2, and 3 stages. It features a 360-degree rotation mechanism, ISOFIX installation, and multiple recline positions to adapt to your child's growth and needs.

Please read this manual carefully before installation and use to ensure proper operation and maximum safety for your child. Keep this manual in a safe place for future reference.

2. Información de seguridad

ADVERTENCIA: No seguir estas instrucciones puede provocar lesiones graves o la muerte.

• Asegure siempre a su hijo en el asiento del automóvil, incluso en viajes cortos.
• Asegúrese de que el asiento del automóvil esté instalado correctamente en su vehículo de acuerdo con las instrucciones.
• Nunca deje a su hijo desatendido en el asiento del automóvil.
• No utilice la silla de auto si ha sufrido un accidente, incluso si no presenta daños visibles. Los daños internos podrían comprometer su seguridad.
• Regularly check that the harness straps are correctly adjusted and not twisted.
• Do not modify the car seat or use accessories not approved by Infanti.
• The car seat must be installed on a vehicle seat equipped with ISOFIX anchors and a Top Tether anchor point for optimal safety.

3. Configuración e instalación

The Infanti FIX 360 Car Seat offers versatile installation options to accommodate different child stages.

3.1. Componentes sobreview

Imagen: Más alláview of the Infanti FIX 360 Car Seat highlighting key features like I-Size and Top Tether installation, 5-point harness, and adjustable head support.

Imagen: Detallada view of the car seat showing adjustable headrest, 5-point harness, 4 recline positions, and side impact protection.

3.2. Installation with ISOFIX and Top Tether

1. Prepare el asiento del automóvil: Ensure the car seat is in the correct orientation for your child's weight group (rear-facing for 0-13 kg, forward-facing for 9-36 kg).
2. Locate ISOFIX Anchors: Find the ISOFIX anchor points in your vehicle's back seat.
3. Ampliar conectores ISOFIX: Press the release buttons on the car seat's ISOFIX connectors and extend them.
4. Conecte los conectores ISOFIX: Push the ISOFIX connectors onto the vehicle's anchor points until you hear a click and the indicators turn green.
5. Empuje el asiento del automóvil firmemente: Empuje el asiento del automóvil firmemente contra el respaldo del asiento del vehículo para eliminar cualquier holgura.
6. Conecte el anclaje superior: Locate the Top Tether strap at the back of the car seat. Extend it and attach the hook to the designated Top Tether anchor point in your vehicle. Tighten the strap until the indicator turns green (if applicable) and the strap is taut.

3.3. Rear-Facing Installation (Newborn to 13 kg)

For infants from newborn up to 13 kg (Group 0+), the car seat must be installed in a rear-facing position. Use the ISOFIX and Top Tether system as described above. Ensure the recline position is suitable for a newborn, typically the most reclined setting.

3.4. Forward-Facing Installation (9 kg to 36 kg)

For children from 9 kg up to 36 kg (Group 1, 2, 3), the car seat can be installed in a forward-facing position. Use the ISOFIX and Top Tether system. Adjust the headrest and harness height to match your child's shoulders.

Imagen: Lateral view of the Infanti FIX 360 Car Seat, illustrating its recline capability and compliance with European safety standard ECE R44/04 for enhanced side impact protection.

4. Instrucciones de funcionamiento

4.1. Asegurar a su hijo

1. Lugar Niño: With the car seat rotated to face you (if using the 360-degree function), place your child in the seat.
2. Colocación del arnés: Bring the two shoulder straps over your child's shoulders and connect the two buckle tongues into the central buckle until you hear a click.
3. Apretar el arnés: Pull the harness adjustment strap located at the front of the seat until the harness is snug against your child's body. Ensure you can only fit one finger between the harness and your child's collarbone.
4. Check Crotch Strap: Ensure the crotch strap is positioned correctly between your child's legs.

4.2. Rotación de 360 ​​grados

Image: The Infanti FIX 360 Car Seat showcasing its 360-degree swivel design, which simplifies placing and removing the child by allowing easy rotation for greater convenience.

The FIX 360 Car Seat features a convenient 360-degree rotation mechanism. To rotate the seat:

1. Ensure the car seat is not under tension from the Top Tether (if applicable, slightly loosen it before rotation and re-tighten after).
2. Locate the rotation lever, usually at the front base of the seat.
3. Press the lever and rotate the seat to the desired position (e.g., facing the car door for easy access, or to the correct driving orientation).
4. Suelte la palanca y asegúrese de que el asiento quede firmemente bloqueado en su lugar.

Note: The 360-degree rotation function is primarily designed for ease of access when placing or removing your child. For children above 13 kg installed with the vehicle's seat belt, the rotation function may be limited or unavailable due to the belt path.

4.3. Ajuste de la altura del reposacabezas y del arnés

The headrest and harness system adjust simultaneously. To adjust:

1. Locate the headrest adjustment lever, typically at the top of the headrest.
2. Apriete la palanca y deslice el reposacabezas hacia arriba o hacia abajo hasta que las correas de los hombros estén a la altura o justo debajo de los hombros de su hijo para orientarlo hacia atrás, o a la altura o justo encima para orientarlo hacia adelante.
3. Suelte la palanca para bloquear el reposacabezas en su posición.

4.4. Posiciones de reclinación

The car seat offers 4 recline positions. To adjust the recline:

1. Locate the recline adjustment lever, usually at the front or side of the seat base.
2. Presione la palanca y ajuste el asiento al ángulo de reclinación deseado.
3. Release the lever and ensure the seat locks securely in the chosen position.

5. Mantenimiento

5.1. Limpieza de las fundas de tela

The fabric covers are 100% polyester and are removable for cleaning.

• Consulte la etiqueta de cuidado de la tela para obtener instrucciones de lavado específicas.
• Typically, machine wash on a delicate cycle with cold water and mild detergent.
• Do not bleach, iron, or tumble dry. Air dry only.

5.2. Limpieza de las piezas de plástico

Limpie las piezas de plástico con publicidadamp paño y jabón suave. No utilice limpiadores abrasivos ni disolventes.

5.3. Cuidado del arnés

Limpie las correas del arnés con publicidad.amp cloth. Do not machine wash or submerge the harness straps, as this can weaken the material.

6. Solución de problemas

6.1. Car Seat Feels Loose After Installation

• Ensure ISOFIX connectors are fully engaged and indicators are green.
• Push the car seat firmly against the vehicle seat back to remove any gaps.
• Verify the Top Tether strap is securely attached and tightened.

6.2. Difficulty Tightening Harness

• Check that the harness straps are not twisted.
• Ensure the buckle tongues are fully inserted into the central buckle.
• Pull the adjustment strap smoothly and firmly.

6.3. 360-Degree Rotation Not Working Smoothly

• Ensure the rotation lever is fully engaged when attempting to rotate.
• Check for any obstructions around the base of the car seat.
• If the car seat is installed with the vehicle's seat belt for older children, the rotation function may be restricted.

6.4. Crotch Strap Appears Too Short

• Ensure the crotch strap is routed correctly through the seat pad.
• The crotch strap length is fixed for safety standards. If it consistently feels too short, ensure your child is within the recommended weight and height limits for the seat.

7. Especificaciones

Imagen: Frontal y lateral views of the Infanti FIX 360 Car Seat, displaying its assembled dimensions of 62 x 48.5 x 57 cm.

8. Información de garantía

Infanti products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the warranty card included with your product or visit the official Infanti websitio.

9. Atención al cliente

If you have any questions, concerns, or require assistance with your Infanti FIX 360 Car Seat, please contact Infanti customer service.

• Soporte en línea: Visit the official Infanti webSitio para preguntas frecuentes, registro de productos y formularios de contacto de soporte.
• Información del contacto: Refer to the packaging or the Infanti website for local customer service phone numbers and email addresses.