DEUSES 2105-1107010-20

DEUSES Carburetor Instruction Manual

For Lada 2101-2107, Lada Niva 1200ccm/1300ccm (OEM 2105-1107010-20)

1. Introducción

This instruction manual provides essential information for the proper installation, operation, and maintenance of your new DEUSES Carburetor. To ensure optimal performance and longevity, please read this manual thoroughly before attempting any installation or adjustment. This carburetor is designed as a replacement part for specific Lada models.

2. Producto terminadoview

The DEUSES Carburetor (OEM 2105-1107010-20) is a high-performance engine component engineered for reliable fuel delivery. It features robust metal construction designed for durability and consistent operation. This unit is intended to directly replace the original equipment carburetor, aiming to restore or improve engine performance.

Características principales:

  • Construcción de alta calidad para mayor durabilidad.
  • Designed for direct replacement of original equipment.
  • Aids in maintaining fuel efficiency while enhancing power output.
  • Fiable y fácil de instalar.
DEUSES Carburetor, top-down view

Imagen 1: De arriba hacia abajo view of the DEUSES Carburetor, showing the air intake and primary/secondary barrels.

3. Compatibilidad

This carburetor is compatible with the following vehicle models and engine displacements. It is crucial to verify the OEM part number (2105-1107010-20) against your existing carburetor to ensure correct fitment.

  • Lada 1200ccm
  • Lada 1300ccm
  • Lada Niva Base Sport Utility 2-Door 1.6L (1590CC, 97Cu. In. l4 GAS Naturally Aspirated) for model years 1988-1992.
  • Lada 2101-2107 series.

Importante: Always cross-reference the part number 2105-1107010-20 with your vehicle's original equipment to confirm compatibility before installation.

DEUSES Carburetor, angled front view

Imagen 2: Frente en ángulo view of the DEUSES Carburetor, showing various linkages and fuel inlet.

4. Instalación

Installation of a carburetor requires mechanical knowledge and appropriate tools. If you are not confident in your ability to perform this procedure, it is recommended to seek assistance from a qualified mechanic.

Pasos generales de instalación:

  1. Seguridad ante todo: Disconnect the vehicle's battery. Ensure the engine is cool.
  2. Drenar combustible: Relieve fuel pressure and drain any fuel from the fuel lines to prevent spills.
  3. Remove Air Cleaner: Detach the air cleaner assembly from the old carburetor.
  4. Desconecte los enlaces y las mangueras: Carefully disconnect all fuel lines, vacuum hoses, and throttle/choke linkages from the old carburetor. Label them if necessary for reassembly.
  5. Retire el carburador viejo: Unbolt the old carburetor from the intake manifold. Remove the old gasket.
  6. Prepare for New Carburetor: Clean the intake manifold surface thoroughly. Place a new carburetor gasket onto the manifold.
  7. Instalar carburador nuevo: Carefully place the new DEUSES Carburetor onto the gasket and secure it with the mounting bolts. Tighten bolts evenly to prevent warping.
  8. Reconectar componentes: Reattach all fuel lines, vacuum hoses, and throttle/choke linkages to the new carburetor. Ensure all connections are secure and free of leaks.
  9. Install Air Cleaner: Vuelva a instalar el conjunto del filtro de aire.
  10. Vuelva a conectar la batería: Vuelva a conectar la batería del vehículo.
  11. Puesta en marcha inicial y ajuste: Start the engine and check for fuel leaks. Allow the engine to reach operating temperature. Perform initial idle speed and mixture adjustments as required for your specific vehicle model.
DEUSES Carburetor, side view con entrada de combustible

Imagen 3: Lateral view of the DEUSES Carburetor, highlighting the fuel inlet and various adjustment screws.

5. Operación

Once installed and properly adjusted, the carburetor will regulate the air-fuel mixture supplied to the engine. Proper operation relies on correct initial setup and regular maintenance.

Aspectos operativos clave:

  • Inicio fresco: Utilize the choke mechanism (if applicable) for easier starting in cold weather.
  • Calentamiento: Allow the engine to warm up to operating temperature before driving to ensure stable idle and optimal performance.
  • Respuesta del acelerador: The carburetor should provide smooth and responsive acceleration.
  • Idle Stability: A properly adjusted carburetor will maintain a consistent engine idle speed.
DEUSES Carburetor, rear view

Imagen 4: Trasera view of the DEUSES Carburetor, showing the throttle linkage and mounting points.

6. Mantenimiento

Regular maintenance is crucial for the longevity and efficient operation of your carburetor. Adhere to your vehicle's manufacturer recommendations for service intervals.

Consejos de mantenimiento:

  • Filtro de aire: Inspeccione y reemplace periódicamente el filtro de aire para evitar que la suciedad y los residuos entren en el carburador.
  • Filtro de combustible: Ensure the fuel filter is clean and functioning correctly to prevent contaminants from reaching the carburetor.
  • Lubricación del varillaje: Periodically lubricate throttle and choke linkages to ensure smooth operation.
  • Inspección visual: Check for any loose connections, cracked hoses, or fuel leaks around the carburetor.
  • Limpieza: If performance issues arise, a professional carburetor cleaning may be necessary. Avoid using harsh chemicals that could damage seals or components.
DEUSES Carburetor, front view

Imagen 5: Frente view of the DEUSES Carburetor, showing the main body and various ports.

7. Solución de problemas

This section addresses common issues that may arise with carburetor operation. For complex problems, consult a qualified automotive technician.

Problemas comunes y soluciones:

  • El motor gira pero no arranca:
    • Check fuel supply to the carburetor.
    • Verify choke operation.
    • Inspect for vacuum leaks.
  • Ralentí irregular o estancamiento:
    • Adjust idle speed and mixture screws.
    • Compruebe si hay fugas de vacío.
    • Ensure fuel filter is clean.
  • Poor Acceleration or Hesitation:
    • Inspect accelerator pump operation.
    • Check for clogged fuel passages.
    • Verify proper choke disengagement.
  • Consumo excesivo de combustible:
    • Check float level adjustment.
    • Ensure mixture screws are correctly set.
    • Inspect for fuel leaks.
DEUSES Carburetor, bottom view

Imagen 6: Abajo view of the DEUSES Carburetor, showing the base plate and mounting holes.

8. Especificaciones

AtributoDetalle
FabricanteDEUSES
Número de pieza OEM2105-1107010-20
Compatible Engine Displacements1200ccm, 1300ccm, 1.6L (1590CC)
Modelos de vehículos compatiblesLada 2101-2107, Lada Niva (1988-1992)
Peso del artículo0.035 ounces (Note: This weight seems unusually low for a carburetor and may be a data entry error. Please refer to actual product for accurate weight.)
ASINB0CFTHSPG3

9. Garantía y soporte

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the DEUSES customer service department. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the DEUSES official websitio o póngase en contacto con su distribuidor autorizado.

© 2023 DEUSES. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.