COMICA Traxshot Pro Shotgun Microphone Instruction Manual

Introducción

The COMICA Traxshot Pro is a versatile super-cardioid transformable shotgun microphone designed for high-quality audio capture across various devices and scenarios. This manual provides detailed instructions for setting up, operating, and maintaining your microphone to ensure optimal performance.

Contenido del paquete

• Traxshot PRO Shotgun mic
• Cable de audio TRS-TRS de 3.5 mm
• Cable de audio TRRS-TRRS de 3.5 mm
• USB 2 in 1 Audio Cable
• Manguito de viento

Asegúrese de que todos los elementos estén presentes antes de continuar con la configuración.

Image: All components included in the COMICA Traxshot Pro package.

Características principales

• Multi-Pickup Modes & Angles: Offers A, PM, PS modes and 4 pickup angles (mono, 30°, 90°, 180° stereo) for diverse scenarios.
• Modos de salida dual: Seamlessly switch between USB digital and 3.5mm analog outputs for compatibility with cameras, phones, tablets, and computers.
• Enhanced Sound Control: Features two-stage low-cut filters (75Hz and 150Hz) and stepless output gain/monitoring volume control.
• Batería de larga duración: Built-in rechargeable lithium battery provides up to 22 hours of uninterrupted recording.
• User-Friendly USB-C Port: Utilized for charging, digital output, and firmware upgrades.
• Innovative Noise Reduction: Air-float shock-absorption and internal windproof technology reduce physical noise and wind interference.

Configuración e instalación

The Traxshot Pro is designed for easy integration with various devices. Follow these steps for initial setup:

1. Attach to Camera/Tripod: Secure the microphone to your camera's hot shoe mount or a tripod using the 1/4" thread hole on the shock mount.


Image: The microphone can be mounted on a camera's hot shoe or a tripod for stable recording.

2. Conectar el cable de audio: Use the appropriate 3.5mm TRS-TRS cable for cameras or 3.5mm TRRS-TRRS cable for smartphones/tablets. For digital output, use the USB 2 in 1 Audio Cable.
3. Apply Wind Muff: For outdoor recording or windy conditions, place the provided wind muff over the microphone capsules to minimize wind noise.

Instrucciones de funcionamiento

1. Encendido/Apagado y Selección de Modo

• Encendido: Press and hold the Power/LCF Switch Button for a few seconds. The IPS display will illuminate.
• Selección de modo: Tap the Pickup Mode Switch Button to cycle through A (Automatic), PM (Custom Mono), and PS (Custom Stereo) pickup modes.


Image: The microphone offers multiple polar patterns for different recording needs.

• Pickup Angle Adjustment: Manually adjust the microphone capsules to achieve desired angles (mono, 30°, 90°, 180° stereo). The IPS display will show the current angle.


Image: The microphone capsules can be physically adjusted to change the pickup angle.

2. Control de sonido

• Filtro de corte bajo: Tap the Power/LCF Switch Button to cycle through 75Hz, 150Hz low-cut filters, or turn them off. This helps eliminate low-frequency noise.
• Control de ganancia de salida: Rotate the Gain Control Knob to adjust the output volume. Monitor levels on the IPS display.


Image: The microphone features a gain control knob and an IPS screen for real-time monitoring of audio levels and settings.

3. Dual Output Modes

• Analog Output (3.5mm): Connect the appropriate 3.5mm cable to the OUT port for cameras, smartphones, or other devices with a 3.5mm input.
• Digital Output (USB-C): Connect the USB 2 in 1 Audio Cable to the USB-C port for direct digital audio to computers, tablets, or compatible smartphones.


Image: The microphone supports both analog and digital output for broad device compatibility.

Carga y duración de la batería

The Traxshot Pro features a built-in rechargeable lithium battery. It offers up to 22 hours of use on a single charge, ensuring long recording sessions.

• Cargando: Connect the USB 2 in 1 Audio Cable to the USB-C port on the microphone and a power source. The IPS display will indicate charging status.
• Nivel de batería: Monitor the battery level directly on the IPS display during operation.

Image: The IPS screen provides real-time information including battery status.

Actualización de firmware

The USB-C port on the Traxshot Pro also supports firmware upgrades. Visit the official COMICA webSitio para obtener el firmware más reciente e instrucciones sobre cómo actualizar su dispositivo.

Image: The USB-C port allows for convenient firmware updates to enhance microphone functionality.

Solución de problemas

• Sin salida de audio:
  • Compruebe si el micrófono está encendido.
  • Ensure the correct audio cable (TRS/TRRS/USB-C) is securely connected to both the microphone and your recording device.
  • Verify the input settings on your recording device (camera, phone, PC).
  • Adjust the Gain Control Knob on the microphone.
• Audio distorsionado:
  • Lower the Gain Control Knob on the microphone.
  • Check the input levels on your recording device to prevent clipping.
  • Ensure the wind muff is properly installed if recording in windy conditions.
• Problemas de conectividad:
  • For USB-C connections, ensure your device supports external audio input via USB-C.
  • Pruebe con un puerto o cable USB-C diferente.

Presupuesto

Vídeos oficiales de productos

Garantía y soporte

The COMICA Traxshot Pro Shotgun Microphone comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in the product packaging or visit the official COMICA websitio.

Conserve su comprobante de compra para validar la garantía.