BOSHIRO 4-Drawer Dresser User Manual

1. Información importante de seguridad

Lea y comprenda todas las instrucciones antes de ensamblar y usar. Conserve este manual para futuras consultas.

• Dispositivo antivuelco: To prevent serious or fatal crushing injuries, this product must be permanently secured to the wall with the included anti-tip device. Ensure the device is installed correctly according to the instructions.
• Seguridad de los niños: Do not allow children to climb on drawers or the dresser. Always supervise children around furniture.
• Límites de peso: Do not exceed the recommended weight limits for drawers or the top surface. Overloading can cause instability and damage.
• Asamblea: Assembly should be performed by at least two adults. Ensure all parts are securely fastened before use.

WARNING: Failure to follow these warnings can result in serious injury or death.

2. Contenido del paquete

Antes de comenzar el montaje, verifique que todas las piezas que se indican a continuación estén presentes y sin daños. Si alguna pieza falta o está dañada, póngase en contacto con atención al cliente.

• Paneles de tocador (superior, inferior, laterales y posterior)
• Componentes de los cajones (frentes, laterales, traseras, fondos)
• Drawer Slides (for dresser frame and drawers)
• Vinotage Metal Knobs (4 pieces)
• Assembly Hardware (Screws, Dowels, Cam Locks, Bolts, etc.)
• Anti-Tip Safety Kit
• Manual de instrucciones

Imagen: Más alláview of dresser dimensions and individual drawer capacity (33 lbs per drawer, 66 lbs for top surface).

3. Instrucciones de montaje

Assembly typically requires two adults and approximately 1-2 hours. A Phillips head screwdriver and a hammer (not included) may be needed.

1. Preparar el espacio de trabajo: Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches. Identify each part using the provided labels.
2. Ensamblar el marco principal: Attach the side panels to the bottom panel using the designated hardware (e.g., cam locks and dowels). Ensure all connections are tight and secure.
3. Install Drawer Slides to Frame: Secure the longer drawer slides to the inner sides of the dresser frame. Pay close attention to the orientation and ensure they are level.
4. Coloque el panel superior: Fije el panel superior al marco ensamblado.
5. Ensamblar cajones: For each of the four drawers, attach the side panels to the front and back panels. Slide the drawer bottom into the grooves. Secure the shorter drawer slides to the sides of each assembled drawer.
6. Instalar perillas: Attach the vintage metal knobs to the front of each drawer.
7. Insertar cajones: Carefully align the drawer slides on the drawers with the slides on the dresser frame and gently push each drawer into place until it clicks or slides smoothly.
8. Instalar dispositivo antivuelco: Following the specific instructions in your package, attach the anti-tip strap to the back of the dresser and then securely fasten it to a wall stud. This step is crucial for safety.

Image: Detailed diagram illustrating the correct positioning of screws for drawer slide installation. Ensure screw (F) is locked in the first hole against the pulley (H) on part (5) to ensure proper drawer function.

Image: Close-up details highlighting the vintage metal knobs, solid construction of the dresser legs, and the smooth drawer glide mechanism.

4. Instrucciones de funcionamiento

The BOSHIRO 4-Drawer Dresser is designed for organized storage in various rooms.

• Uso del cajón: Each drawer is equipped with wide slides for smooth gliding. To open, gently pull the knob. To close, push the drawer firmly until it is fully seated.
• Capacidad de peso: Each drawer can hold up to 33 pounds (15 kg). The top surface of the dresser can support up to 66 pounds (30 kg). Distribute weight evenly to maintain stability.
• Maximizar el espacio: The drawers are designed to open up to 4/5 of their depth, allowing for easy access and maximum utilization of storage space.

Image: The dresser with drawers open, illustrating its large storage capacity suitable for various items like clothing, accessories, and small household goods.

5. Mantenimiento y cuidado

El cuidado adecuado ayudará a mantener la apariencia y la longevidad de su tocador.

• Limpieza: Wipe the dresser surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Derrames: Limpie inmediatamente cualquier derrame con un paño seco o ligeramente húmedo.amp cloth to prevent staining or water damage. The dresser features a waterproof surface for easier cleaning.
• Exposición a la luz solar: Evite la exposición prolongada a la luz solar directa para evitar la decoloración o decoloración del acabado.
• Humedad: Mantenga un nivel de humedad estable en la habitación para evitar que la madera se deforme o agriete.
• Comprobación del hardware: Revise periódicamente todos los tornillos y fijaciones para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.

Image: Illustration demonstrating the waterproof surface of the dresser, indicating ease of cleaning and spill resistance.

6. Solución de problemas

If you encounter issues with your dresser, refer to the following common solutions:

• Drawers Not Closing Smoothly or Falling Off Tracks:
  • Ensure the drawer slides are correctly installed on both the drawer and the dresser frame. Refer to assembly step 3 and the slide installation diagram.
  • Check that all screws securing the slides are tight. Loose screws can cause misalignment.
  • Verify that the drawer is not overloaded, which can cause strain on the slides.
  • If issues persist, some users have found that adding a small washer in front of the screws that attach the railing to the drawer can help stabilize the wheels and prevent them from coming off the tracks.
• La cómoda se siente inestable o tambaleante:
  • Asegúrese de que todos los herrajes de montaje estén completamente apretados.
  • Verify that the dresser is placed on a level surface. Adjust furniture levelers if applicable.
  • Confirm the anti-tip device is securely installed to the wall.
• Piezas faltantes o dañadas: If you discover any missing or damaged parts during unpacking or assembly, do not proceed with assembly. Contact customer service immediately for assistance.

7. Especificaciones

8. Garantía y soporte

BOSHIRO is committed to providing quality products and customer satisfaction.

• Servicio postventa: If you encounter any problems during the installation process or have questions about your product, please feel free to contact us. We aim to reply within 24 hours and provide a satisfactory solution.
• Información del contacto: Refer to your purchase documentation or the BOSHIRO official webSitio para obtener detalles de contacto de servicio al cliente específicos.