Manual del usuario de la afeitadora de láminas y pelos calvos PRITECH RSM-1699

Introducción

This manual provides detailed instructions for the safe and effective use of your PRITECH Foil and Bald Shaver RSM-1699. Please read all instructions carefully before first use and retain this manual for future reference.

Información de seguridad

Importante advertencia de seguridad:

• When charging, use a power adapter with an input voltage not higher than 5V 1A to ensure safety and efficiency.
• Mantenga el aparato seco. No lo sumerja en agua.
• Mantener fuera del alcance de los niños.
• Do not use if the foil or blades are damaged, as this may cause injury.
• Unplug the shaver before cleaning with water.

Producto terminadoview

The PRITECH Foil and Bald Shaver RSM-1699 is a versatile 2-in-1 electric shaver designed for both foil shaving and bald head trimming. It features adjustable speeds and an LED display.

Image: The PRITECH Foil and Bald Shaver RSM-1699, showing the main unit, protective cover, and USB charging cable.

Componentes:

• Cabezal de afeitado de láminas: For close shaving of facial hair and bald heads.
• Recortadora emergente: For pre-trimming longer hair, sideburns, or detailing.
• Pantalla LED: Shows motor speed (RPM) and remaining battery percentage.
• Botón de encendido: Turns the shaver on/off and activates travel lock.
• Botones de ajuste de velocidad (+/-): To increase or decrease motor speed.
• Puerto de carga USB: For recharging the shaver.
• Cubierta protectora: To protect the foil head when not in use.

Imagen: Una explosión view of the shaver, highlighting the LED display, USB charge port, upgraded double cutting knife tube, ultra-thin cutter head, durable mesh head, and protective cover.

Configuración

Carga inicial

Before first use, fully charge the shaver for approximately 2 hours. A full charge provides up to 120 minutes of cordless operation.

• Conecte el cable de carga USB al puerto de carga de la afeitadora.
• Connect the other end of the USB cable to a compatible power source (e.g., a 5V/1A USB adapter, laptop, USB outlet, car charger, or power bank).
• La pantalla LED indicará el estado de carga.

Image: Various USB charging options for the shaver, including laptop, USB outlet, USB adapter, car charger, and power bank. It also shows 120 minutes running time after 2 hours of fast charging.

Instrucciones de funcionamiento

Turning On/Off and Travel Lock

• Para encender/apagar: Presione brevemente el botón de encendido.
• Para activar el bloqueo de viaje: Press and hold the power button for three seconds. A lock icon will appear on the LED display.
• Para desactivar el bloqueo de viaje: Press and hold the power button for three seconds. The display will count down from 3 to 1, then the shaver will unlock and turn on.

Image: Illustration of how to activate and deactivate the intelligent travel lock by holding the power button for 3 seconds, with a countdown shown on the LED display.

Velocidad de ajuste

The shaver offers 3 adjustable speeds (6500RPM, 7000RPM, 7500RPM) to suit different hair thicknesses and lengths.

• Presione el '+' button to increase the motor speed.
• Presione el '-' button to decrease the motor speed.
• La velocidad actual se mostrará en la pantalla LED.

Image: Close-up of the shaver's LED display showing motor speed (RPM) and remaining power percentage, along with the '+' and '-' buttons for speed adjustment.

Shaving Procedure

1. Pre-trimming (for longer hair): If your hair or beard is long, first use the pop-up trimmer to shorten it. Slide the pop-up trimmer switch upwards to engage it.
2. Afeitado con papel de aluminio: For a close shave, use the main foil shaver head. Move the shaver gently against the direction of hair growth, ensuring the foil makes full contact with your skin.
3. Contorno: The independently floating blades adapt to facial contours for a thorough shave.

Image: A visual guide demonstrating the steps for using the shaver for a bald head, including opening the pop-up trimmer, trimming side hair, trimming top hair, and using the foil head for the final shave.

Imagen: Detallada view of the pop-up trimmer and the foil shaver head, highlighting the double floating cutter head, geometric pattern grid, and 0.02mm ultra-thin knife net for a close shave.

Mantenimiento

Limpieza de la afeitadora

La limpieza regular garantiza un rendimiento y una higiene óptimos.

1. Remove Foil Net: Press the button on the right side of the shaver to easily detach the foil net.
2. Limpieza del cepillo: Utilice el cepillo de limpieza proporcionado para eliminar los pelos sueltos de las cuchillas y del interior del cabezal de la afeitadora.
3. Enjuague: The shaver head is washable. Rinse the detached foil net and blades under running water. Ensure the main body is not immersed.
4. Seco: Deje que todas las piezas se sequen al aire por completo antes de volver a montarlas.

Image: A sequence of images demonstrating how to clean the shaver, including pressing a button to remove the foil head, brushing the blades, and rinsing the head under water.

Reemplazo de cuchillas y láminas

For continued optimal performance, it is recommended to replace the foil and blades periodically, typically every 12-18 months, depending on usage. Replacement parts can be purchased separately from authorized PRITECH retailers.

Solución de problemas

• La afeitadora no se enciende: Check if the battery is charged. Ensure the travel lock is deactivated.
• Rendimiento de afeitado deficiente: Clean the shaver head and blades. Consider replacing the foil and blades if they are old or damaged. Ensure the shaver is fully charged.
• Problemas de carga: Verify the USB cable and power adapter are working correctly and meet the 5V/1A specification.

Presupuesto

Atención al cliente

Your satisfaction is important to us. If you encounter any issues or have questions regarding your PRITECH Foil and Bald Shaver, please contact our customer support team for assistance. We are committed to providing 100% satisfaction.