Manual de instrucciones de la recortadora y afeitadora híbrida Philips OneBlade Face

Introducción

The Philips OneBlade Face Hybrid Trimmer & Shaver is a versatile grooming tool designed for shaving, trimming, and edging any length of facial hair. Its unique technology is engineered to cut hair, not skin, providing a comfortable experience. This manual provides essential information on how to set up, operate, and maintain your OneBlade device for optimal performance and longevity.

Información importante de seguridad

Lea todas las instrucciones de seguridad antes de usar el aparato. Si no las sigue, podría sufrir una descarga eléctrica, un incendio o lesiones graves.

• Always keep the blade away from your eyes.
• Avoid using the device near water sources when charging.
• Charge the device on a dry surface.
• Unplug the device after it is fully charged to prevent overcharging.
• Replace the blade when the replacement indicator (eject icon) appears to maintain optimal performance and hygiene.
• Este aparato no está diseñado para ser utilizado por personas (incluidos niños) con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.

Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

• 1 Philips OneBlade Handle
• 1 Original OneBlade Blade
• 3 Stubble Combs (1mm, 3mm, 5mm)
• 1 USB-A Charging Cord (power adapter not included)
• 1 tapa protectora

Image: The Philips OneBlade device, along with its original blade, three stubble combs (1mm, 3mm, 5mm), a USB-A charging cable, and a protective cap, are shown. The product packaging is also visible, highlighting the "Original blade" and "Designed to cut hair not skin" features.

Configuración

Carga del dispositivo

1. Connect the USB-A charging cord to the charging port on the bottom of the OneBlade handle.
2. Plug the USB-A end of the cord into a compatible USB power adapter (not included) or a USB port on a computer.
3. Allow the device to charge for approximately 8 hours for a full charge. A full charge provides up to 30 minutes of constant shaving power.
4. Ensure the device is completely dry before charging.

Attaching and Detaching the Blade and Combs

• Attaching the Blade: Align the blade with the handle and push it until it clicks into place.
• Detaching the Blade: Press the eject button on the back of the blade and slide it off the handle.
• Attaching Stubble Combs: Select the desired stubble comb (1mm, 3mm, or 5mm). Snap the comb onto the blade until it securely locks.
• Detaching Stubble Combs: Retire con cuidado el peine de la cuchilla.

Image: The Philips OneBlade device is shown alongside its three detachable stubble combs (1mm, 3mm, 5mm). The combs are designed to snap onto the blade for precise trimming lengths.

Instrucciones de funcionamiento

The Philips OneBlade can be used for shaving, trimming, and edging. It is 100% waterproof, allowing for wet or dry use, even in the shower, without the need for shaving cream.

Afeitado

• Ensure the blade is clean and properly attached.
• Presione el botón de encendido para encender el dispositivo.
• Move the OneBlade against the grain of your hair. The blade follows the contours of your face for a comfortable shave.
• Note that the OneBlade does not shave as close as a traditional blade, which helps prevent skin irritation.

Guarnición

• Attach one of the three stubble combs (1mm, 3mm, or 5mm) to achieve your desired beard length.
  • 1mm comb: For a 5 o'clock shadow look.
  • 3mm comb: For a tight, short trim.
  • 5mm comb: For a longer stubble.
• Turn on the device and move it against the direction of hair growth to trim evenly.

Cenefa

• Remove any attached stubble comb.
• Use the dual-sided blade to create precise edges and clean lines.
• Move the blade in any direction to shape your beard or create sharp lines.

Mantenimiento

Limpieza

• Después de cada uso, apague el dispositivo.
• Rinse the blade and the device under running tap water. The OneBlade is 100% waterproof.
• Shake off excess water and allow the device to air dry completely before storing or recharging.

Reemplazo de la hoja

• The durable stainless steel blade is designed to last up to 4 months with typical use (based on 2 full shaves per week).
• When the replacement indicator (eject icon) appears on the blade, it signifies that the blade's performance may no longer be optimal.
• To replace the blade, press the eject button and slide off the old blade. Snap a new Philips OneBlade replacement blade into place.

Solución de problemas

If you encounter any issues with your Philips OneBlade, please refer to the following common solutions:

• El dispositivo no enciende: Asegúrese de que el dispositivo esté completamente cargado. Si la batería está agotada, cárguela durante 8 horas.
• Rendimiento de afeitado deficiente: The blade may need replacement. Check for the eject icon indicator. Ensure the blade is clean and free of hair debris.
• Irritación: Ensure you are using the device correctly, moving it against the grain. If irritation persists, ensure the blade is not dull and consider replacing it.
• Para obtener más ayuda, comuníquese con el servicio de atención al cliente de Philips.

Presupuesto

Garantía y soporte

Para obtener información sobre la garantía y la atención al cliente, consulte la documentación incluida con su compra o visite el sitio web oficial de Philips. webSitio. Conserve su comprobante de compra para cualquier reclamación de garantía.