1. Introducción
Thank you for choosing the Aigo AC SE 360 Rainbow 360mm Water Cooler. This all-in-one liquid cooling solution is designed to provide efficient thermal management for your high-performance CPU, featuring a 360mm triple radiator and vibrant ARGB lighting. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your product.
Image 1.1: Aigo AC SE 360 Rainbow 360mm Water Cooler assembled view.
2. Información de seguridad
- Desconecte siempre la alimentación de su ordenador antes de realizar cualquier instalación o mantenimiento.
- Manipule los componentes con cuidado para evitar dañarlos.
- Asegure una conexión a tierra adecuada para evitar riesgos eléctricos.
- Mantener el producto alejado de la humedad y temperaturas extremas.
- No intente abrir la bomba o el radiador, ya que esto puede anular la garantía y provocar fugas.
- Mantener fuera del alcance de los niños.
3. Contenido del paquete
Verifique que todos los componentes enumerados a continuación estén presentes en su paquete:
- 1x Aigo AC SE 360 Water Cooler Unit (Radiator, Pump/CPU Block, Tubing)
- 3 ventiladores ARGB de 120 mm
- Mounting Hardware for Intel Sockets (LGA 115X, 1200, 1700, 2011, 2066)
- Mounting Hardware for AMD Sockets (AM2, AM3, AM4, AM5)
- Pasta térmica
- Tornillos del ventilador y tornillos del radiador
- ARGB Controller (if included with your specific model)
Image 3.1: All components included in the Aigo AC SE 360 package.
4. Configuración e instalación
Follow these steps for proper installation of your Aigo AC SE 360 Water Cooler:
- Preparar la placa base: Install the appropriate backplate and standoffs for your CPU socket (Intel: 115X, 1200, 1700, 2011, 2066; AMD: AM2, AM3, AM4, AM5). Refer to your motherboard manual for specific instructions.
- Aplicar pasta térmica: Clean the CPU surface. Apply a small amount of thermal paste to the center of the CPU IHS (Integrated Heat Spreader).
- Mount the CPU Block/Pump: Carefully place the CPU block onto the CPU, aligning it with the standoffs. Secure it with the provided screws, tightening them in a diagonal pattern until snug. The magnetic block design allows for easy rotation to align the logo or tubing as desired.
- Install Fans to Radiator: Attach the three 120mm ARGB fans to the radiator using the longer screws provided. Ensure the fan airflow direction is correct for your case configuration (typically blowing air through the radiator).
- Montaje del radiador: Install the radiator assembly into your PC case. The 360mm radiator is compatible with most ATX cases that support this size. Secure it with the appropriate screws.
- Connect Fans (Daisy Chain): The fans feature a daisy chain connection system. Connect the fans to each other in series, then connect the final fan's cable to the motherboard's fan header or an ARGB controller. This simplifies cable management by reducing the number of cables.
- Conecte la iluminación ARGB: Connect the ARGB cables from the fans and pump to a 3-pin, 5V ARGB header on your motherboard or a dedicated ARGB controller. Ensure the voltage is correct (5V) to prevent damage.
- Conectar la alimentación de la bomba: Connect the pump's 4-pin power connector to a dedicated AIO_PUMP or CPU_FAN header on your motherboard.
- Sistema de organización de cables: Organize all cables neatly to ensure proper airflow and a clean build.
5. Instrucciones de funcionamiento
Once installed, the Aigo AC SE 360 Water Cooler operates automatically to maintain optimal CPU temperatures. Here are key operational aspects:
- Enfriamiento automático: The pump and fans will adjust their speed based on CPU temperature, ensuring efficient cooling. The pump operates at 12V with 3200 RPM, and fans operate between 800-1800 RPM.
- Control de iluminación ARGB: The Rainbow ARGB lighting can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through an included ARGB controller. This allows for various lighting effects and synchronization with other ARGB components.
- Nivel de ruido: The cooler is designed for quiet operation, with a noise level of approximately 30 dB.
6. Mantenimiento
Regular maintenance helps ensure the longevity and performance of your water cooler:
- Limpieza de polvo: Limpie periódicamente las aletas del radiador y las aspas del ventilador para evitar la acumulación de polvo, que puede dificultar el flujo de aire y la refrigeración. Utilice aire comprimido o un cepillo suave.
- Inspeccionar los tubos: Revise los tubos para detectar cualquier signo de torceduras, fugas o daños.
- Monitorear temperaturas: Use monitoring software to keep an eye on your CPU temperatures. Significant increases may indicate a need for further inspection or cleaning.
- Pasta térmica: While not frequently required, reapplying thermal paste every few years can help maintain optimal thermal transfer.
7. Solución de problemas
If you encounter issues with your Aigo AC SE 360 Water Cooler, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| Altas temperaturas de la CPU | Insufficient thermal paste, poor contact, dust buildup, pump failure, fan failure. | Reapply thermal paste, ensure CPU block is securely mounted, clean radiator and fans, check pump/fan connections. |
| Los ventiladores no giran | Loose fan connection, incorrect fan header, faulty fan. | Check fan cables and connections, ensure connected to appropriate motherboard header, test fans individually if possible. |
| Sin iluminación ARGB | Loose ARGB connection, incorrect ARGB header (e.g., 12V instead of 5V), faulty ARGB component. | Verify ARGB cables are securely connected to a 3-pin, 5V ARGB header. Check motherboard manual for correct header. |
| Ruidos inusuales | Air bubbles in loop, fan rubbing, pump issue. | Gently tilt the PC case to help dislodge air bubbles. Check for obstructions around fans. If pump noise persists, contact support. |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Modelo | AC SE 360 |
| Tamaño del radiador | 360 mm (394 x 120 x 27 mm) |
| Tamaño del ventilador | 120 milímetros |
| Velocidad del ventilador | 800-1800 RPM |
| Flujo de aire | 64.05 pies cúbicos por minuto |
| Presión estática | 1.85 mmH₂O |
| Nivel de ruido | 30 dB |
| Volumen de la bombatage | 12 voltios |
| Velocidad de la bomba | 3200 RPM |
| Consumo de energía | 3.24 vatios |
| Tipo de rodamiento | Teniendo cerámica |
| TDP Supported | 280 W |
| Enchufes compatibles | Intel (LGA 115X, 1200, 1700, 2011, 2066), AMD (AM2, AM3, AM4, AM5) |
| Conector de alimentación | 4 pines |
| Conector ARGB | 3 pines, 5 V |
9. Garantía y soporte
The Aigo AC SE 360 Water Cooler comes with a Garantía de 12 meses A partir de la fecha de compra. Esta garantía cubre defectos de fabricación en condiciones normales de uso.
For technical support, warranty claims, or any questions not covered in this manual, please contact your retailer or the Aigo customer support team. Please have your proof of purchase and product model number (ACSE360) ready when contacting support.