TORQUE Air Spring Bag Suspension Kit (TR2400)

1. Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your TORQUE Air Spring Bag Suspension Kit, model TR2400. This kit is designed to enhance the load-carrying capacity, stability, and ride quality of your vehicle by providing adjustable air support to the rear suspension. Proper installation and maintenance are crucial for optimal performance and safety.

2. Información de seguridad

Priorice siempre la seguridad durante la instalación y el funcionamiento. El incumplimiento de estas instrucciones podría provocar lesiones o daños a su vehículo.

• Instalación profesional recomendada: While designed for bolt-on installation, professional assistance is recommended if you are unfamiliar with automotive suspension systems.
• Soporte de vehículos: Always use jack stands or a lift to securely support the vehicle when working underneath it. Never rely solely on a jack.
• Protección ocular: Utilice protección ocular adecuada durante la instalación.
• Presión del aire: Never exceed the maximum recommended air pressure of 100 PSI. Maintain a minimum of 5 PSI at all times to prevent damage to the air springs.
• Inspección de componentes: Regularly inspect all components for wear, damage, or leaks.
• Componentes calientes: Allow exhaust components to cool before working near them.

3. Contenido del paquete

Verify that all components listed below are present in your kit before beginning installation. If any parts are missing or damaged, contact customer service.

Componentes incluidos:

• 2 bolsas de aire
• Upper Brackets
• Lower Brackets
• Left Jounce Stop Bracket
• Right Jounce Stop Bracket
• Long 4x4 Spacer
• Short 4x4 Spacer
• 1/2" Spacer
• Fianza Clamp
• Air Line Tubing (Red)
• Escudo térmico
• Fuel Line Bracket
• All necessary Bolts, Nuts, Fittings, and Washers
• válvulas de inflado
• Guía de instalación

4. Información de montaje

This TORQUE Air Spring Bag Suspension Kit (TR2400) is specifically designed for the following vehicles:

• 2005-2007 Ford F250 4WD (Rear Only)
• 2005-2007 Ford F350 4WD (Rear Only)

Importante: Este kit es NO compatible with vehicles equipped with an in-bed hitch. Please ensure your vehicle matches these specifications for proper fitment and operation.

5. Configuración e instalación

The TORQUE Air Spring Bag Suspension Kit features a bolt-on installation process, requiring no frame drilling. All necessary hardware is included. For detailed, step-by-step instructions, please refer to the dedicated installation manual provided within your kit.

Puntos clave de instalación:

• Ensure the vehicle is safely supported and the wheels are chocked.
• Follow the torque specifications for all fasteners as outlined in the installation manual.
• Route air lines carefully, avoiding sharp edges, moving parts, and heat sources. Secure them with zip ties.
• Install inflation valves in an easily accessible yet protected location.
• After installation, inflate the air springs to 5 PSI and check for leaks using a soapy water solution.

6. Instrucciones de funcionamiento

The air springs provide adjustable load support. Adjust the air pressure according to your load requirements to maintain a level ride and optimal handling.

Pautas de presión de aire:

• Presión mínima: Always maintain a minimum of 5 PSI in the air springs, even when unloaded. This prevents damage to the air springs.
• Presión máxima: No excedas 100 PSI.
• Nivelación de carga: Inflate the air springs to achieve a level vehicle stance when carrying a load or towing. This helps maintain steering control, braking effectiveness, and reduces bottoming out.
• Comodidad de conducción: Adjust pressure to find the optimal balance between load support and ride comfort. Higher pressure provides more support but can result in a firmer ride.

7. Mantenimiento

Regular maintenance ensures the longevity and optimal performance of your air spring suspension system.

• Inspección mensual: Check air pressure monthly. Inspect air lines, fittings, and air springs for any signs of wear, cracks, or leaks.
• Limpieza: Keep the air springs and surrounding components free from dirt, debris, and corrosive materials.
• Integridad de la línea de aire: Ensure air lines are securely fastened and not rubbing against any vehicle components.
• Presión mínima: Always maintain at least 5 PSI in the air springs to prevent damage.

8. Solución de problemas y preguntas frecuentes

Esta sección aborda preguntas y problemas comunes que puede encontrar.

Preguntas frecuentes:

• Will it fit if my vehicle is lifted front and rear?
  If the front of the truck is lifted, it will fit. It does not affect the rear. If the rear of the truck is lifted, you may need a spacer. Refer to the spacer table below for guidance.
• Will it fit if my vehicle is lowered?
  No, this kit will NO fit if your vehicle is lowered.
• What should be the minimum and maximum PSI?
  El mínimo es 5 PSI. Maximum is 100 PSI.
• Can I use a cradle?
  Yes, you can use a cradle with this kit. The compatible cradle part number is TR3004. You can search for the cradle by part number.

Spacer Selection Table:

Puede buscar espaciadores por número de pieza.

9. Especificaciones

• Número de modelo: TR2400AS + TR3004 (Kit includes TR2400AS, cradle TR3004 sold separately or as part of a kit)
• Reemplaza los números de piezas OEM: 2400, W21-760-2400, W217602400
• Capacidad de nivelación de carga: Hasta 5,000 libras
• Presión de aire mínima: 5 PSI
• Presión máxima del aire: 100 PSI
• Instalación: Bolt-on, No Drilling Required
• Posición: Eje trasero
• Air Inlet Material: 4140 Grade Steel (compared to OEM 1040 grade)
• Air Spring Durability: Designed to withstand up to 500 PSI (not recommended for operation above 100 PSI)
• Peso del kit: Aproximadamente 30 libras
• Dimensiones del paquete: 14 x 12 x 10 pulgadas

10. Información de garantía

For specific warranty terms and conditions, please refer to the official documentation included with your product or visit the Torque webSitio. La cobertura de la garantía generalmente cubre defectos de fabricación y fallas de material en condiciones normales de uso.

11. Soporte

Should you require technical assistance, have questions regarding installation, or need to report a missing/damaged part, please contact Torque customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's websitio.

Recursos en línea:

• Visita el Tienda Torque en Amazon Para obtener información adicional sobre el producto y soporte.