1. Introducción
This instruction manual provides essential information for the safe and effective use of your Secretlab Titan Evo Ash Gaming Chair. Please read this manual thoroughly before assembly and operation to ensure proper setup and to maximize the chair's features. Retain this manual for future reference.
Imagen 1.1: Frente view of the Secretlab Titan Evo Ash Gaming Chair.
2. Información de seguridad
- Recomendación de peso máximo: No exceda el peso máximo recomendado de 129 kg (285 libras). Exceder este límite podría causar daños a la silla o lesiones personales.
- Asamblea: Assembly may require tools and safety precautions. Follow all assembly steps carefully.
- Colocación: Utilice la silla sobre una superficie estable y nivelada.
- Limpieza: Consulte la sección de mantenimiento para obtener instrucciones de limpieza adecuadas.
3. Configuración y montaje
The Secretlab Titan Evo chair is designed for straightforward assembly. All necessary tools are typically included. It is recommended to assemble the chair in the intended use area.
3.1 Desembalaje y preparación
- Abra con cuidado el embalaje y retire todos los componentes.
- Lay out all parts on a clean, flat surface, preferably on the provided protective mat or a soft cloth to prevent scratches.
- Verify that all components listed in the parts list (usually found in a separate quick-start guide) are present.
3.2 Pasos de montaje
Si bien los pasos específicos pueden variar levemente, el proceso de ensamblaje general implica:
- Attach Casters to Wheelbase: Insert the casters into the holes on the star-shaped wheelbase until they click into place.
- Instalar elevador de gas: Place the gas lift cylinder into the center hole of the wheelbase.
- Attach Seat Base to Mechanism: Secure the multi-tilt mechanism to the underside of the seat base using the provided screws.
- Conecte el respaldo a la base del asiento: Align the backrest with the seat base and secure it using the side brackets and screws.
- Apoyabrazos de montaje: Attach the 4D armrests to the designated points on the seat base.
- Combinar secciones superior e inferior: Coloque el asiento y el respaldo ensamblados sobre el cilindro de elevación de gas.
Image 3.1: The Secretlab Titan Evo Ash Gaming Chair in a typical usage environment.
Imagen 3.2: Parte delantera y trasera views of the chair, illustrating its design.
4. Instrucciones de funcionamiento
The Secretlab Titan Evo chair offers multiple adjustment options to customize your seating experience.
4.1 Ajuste de altura
To adjust the chair's height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise it. Release the lever at the desired height.
4.2 Función de reclinación
The backrest can recline up to 165 degrees. To recline, pull the lever on the right side of the chair (near the backrest hinge) upwards and lean back. Release the lever to lock the backrest in position.
4.3 Multi-Tilt Mechanism
The multi-tilt mechanism allows the entire seat and backrest to tilt simultaneously. A lever on the left side beneath the seat controls this function. Pull the lever out to enable tilt, and push it in to lock the tilt angle. A tension knob beneath the seat (usually at the front) adjusts the resistance of the tilt.
4.4 4D Armrests
The 4D armrests offer four directions of adjustment:
- Altura: Presione el botón en el costado del soporte del apoyabrazos y mueva el apoyabrazos hacia arriba o hacia abajo.
- Hacia adelante hacia atrás: Deslice la almohadilla del apoyabrazos hacia adelante o hacia atrás.
- Left/Right (Pivot): Gire la almohadilla del apoyabrazos hacia la izquierda o hacia la derecha.
- Hacia adentro/hacia afuera: Slide the armrest pad inward or outward.
4.5 Magnetic Head Pillow
The memory foam magnetic head pillow attaches to the backrest without straps. Adjust its position by sliding it up or down the backrest to find optimal neck support. The magnets will hold it in place.
Image 4.1: Detail of the magnetic head pillow for adjustable neck support.
4.6 4-Way Lumbar Support
The built-in 4-way adjustable lumbar support is controlled by a knob on the right side of the backrest. Rotate the knob to adjust the depth and height of the lumbar support to conform to your spine.
Image 4.2: The lumbar support adjustment knob, allowing for personalized back support.
Image 4.3: A user seated in the chair, illustrating the recommended posture and chair sizing.
5. Mantenimiento
Regular maintenance helps preserve the appearance and functionality of your Secretlab Titan Evo chair.
5.1 Limpieza
The chair's leatherette surface is designed for durability and ease of cleaning. To clean, simply wipe with a damp paño. Evite utilizar productos químicos agresivos, limpiadores abrasivos o disolventes, ya que pueden dañar el material.
Image 5.1: Detail of the Secretlab NEO Hybrid Leatherette, known for its durability.
5.2 Cuidados generales
- Revise periódicamente todos los tornillos y pernos para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the material's lifespan.
- Asegúrese de que las ruedas estén libres de residuos para mantener un movimiento suave.
6. Solución de problemas
This section addresses common issues you might encounter with your Secretlab Titan Evo chair.
| Problema | Posible causa | Solución |
|---|---|---|
| La silla no ajusta la altura | Mal funcionamiento del elevador de gas o palanca no activada. | Asegúrese de que la palanca de ajuste de altura esté completamente enganchada. Si el problema persiste, contacte con atención al cliente. |
| El respaldo no se reclina ni se bloquea | Recline lever not engaged or mechanism obstruction. | Check for obstructions around the recline mechanism. Ensure the lever is pulled completely to recline and released to lock. |
| Armrests are loose or broken | Mounting screws are loose or internal damage. | Check and tighten armrest mounting screws. If the armrest is damaged, contact customer support for replacement parts. |
| Lumbar support makes noise or does not adjust | Problema de mecanismo interno. | If the lumbar support creaks or does not adjust smoothly, contact customer support for assistance. |
| La silla se siente inestable o tambaleante | Pernos de montaje sueltos o suelo irregular. | Verify all assembly bolts are securely tightened. Ensure the chair is on a flat, even surface. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Secretlab Customer Support.
7. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Secretlab |
| Nombre del modelo | Titan Evo (M07-E24PU-ASHHH3R) |
| Color | Ceniza |
| Dimensiones del producto (Pr. x An. x Al.) | 19.3" x 22" x 51.2" (49 cm x 56 cm x 130 cm) |
| Tamaño | Regular (Recommended for 5'7" - 6'2" and under 220lbs) |
| Recomendación de peso máximo | 285 libras (129 kg) |
| Peso del artículo | 75.9 libras (34.4 kg) |
| Material (Upholstery) | NEO Hybrid Leatherette |
| Material de relleno | Cold-cure foam, Memory Foam (head pillow) |
| Estilo de brazo | Full-metal 4D Armrests with CloudSwap Technology |
| Soporte lumbar | Patent-pending 4-Way L-ADAPT Lumbar Support System |
| Almohada para la cabeza | Patent-pending Magnetic Memory Foam Head Pillow |
| Recuento de posiciones reclinadas | Hasta 165 grados |
| Base | Reinforced ADC12 Aluminum Wheelbase |
| Fecha de primera disponibilidad | 9 de junio de 2022 |
8. Información de garantía
The Secretlab Titan Evo Ash Gaming Chair comes with an extended warranty for peace of mind. Secretlab offers up to a 5-year extended warranty. For specific terms and conditions, including registration requirements, please refer to the official Secretlab websitio o póngase en contacto con el servicio de atención al cliente.
9. Atención al cliente
For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Secretlab Customer Support. You can typically find contact information on the official Secretlab websitio o a través de su plataforma de compra.
When contacting support, please have your model number (M07-E24PU-ASHHH3R) and proof of purchase readily available.