Manual del usuario del spa inflable Goplus

1. Producto terminadoview

The Goplus Inflatable Hot Tub Spa is designed to provide a relaxing spa experience for 2-4 persons. It features 108 high-powered massage bubble jets, a comfortable heating system, and a circulating water filtration system to ensure clean and enjoyable use. This manual provides detailed instructions for setup, operation, and maintenance.

Figure 1: Goplus Inflatable Hot Tub Spa with external pump unit.

Figure 2: The hot tub comfortably accommodates 2-4 individuals.

2. Contenido del paquete

Before beginning assembly, ensure all components listed below are present and undamaged. Refer to Figure 3 for a visual representation of the package contents and dimensions.

Figura 3: Contenido del paquete y dimensiones del producto.

3. Instrucciones de configuración

Follow these steps to set up your Goplus Inflatable Hot Tub Spa. For a visual guide, please refer to the official instruction video below.

1. Preparación: Choose a flat, stable surface for your hot tub. Lay out the ground sheet to protect the tub and reduce heat loss. Unfold the inflatable spa tub on top of the ground sheet.
2. Inflación:
   • Ensure the inner valve of the tub is closed by pressing the button in the center of the valve.
   • Insert the inflatable hose into the air inlet of the tub and rotate it clockwise to secure.
   • Plug the pump unit into a suitable power outlet.
   • Press the bubble button on the control panel to begin inflating the tub. The tub will inflate to its proper shape.
   • Once fully inflated, remove the inflatable hose and securely insert the cap into the valve.
3. Instalación del cartucho de filtro: Install the filter cartridge into its designated housing inside the tub. Refer to Figure 4 for proper placement.
4. Llenado con agua: Fill the hot tub with water using a garden hose. Ensure the water level is between the minimum and maximum waterline indicators marked inside the tub.
5. Connecting the Pump Unit: Connect the two main hoses from the pump unit to the corresponding inlets/outlets on the hot tub. Ensure all connections are tight and the seals are properly in place to prevent leaks.
6. Aplicación de la cubierta: Place the dust-proof insulation cover over the hot tub. Secure the cover using the locking buckles around the perimeter of the tub. This helps maintain water temperature and prevents debris from entering.

Figure 4: Water filtration system and flow direction.

Figure 5: Key features including cup holders, headrest, and secure locking buckles.

4. Instrucciones de funcionamiento

The Goplus Hot Tub Spa is operated via the intuitive control panel on the pump unit. Familiarize yourself with the functions to optimize your spa experience.

Figura 6: Panel de controlview.

• Encendido/apagado: Presione el botón de encendido para encender o apagar la unidad.
• Ajuste de temperatura: Use the up and down arrow buttons to set your desired water temperature. The maximum heating temperature is 104°F (40°C). The heating rate is approximately 3.6-5.4°F per hour. To switch between Fahrenheit (°F) and Celsius (°C), press and hold the up and down arrow buttons simultaneously.
• Función de burbuja: Press the bubble button to activate the 108 high-powered massage bubble jets. These jets provide a 360° full-body relaxation experience. Press the button again to turn off the bubbles.
• Filtración de filtros: The filter button activates the circulating water filtration system, which helps keep the water clean by removing sand, debris, and hair.
• Bloqueo para niños: To lock or unlock the control panel, press and hold the up and down arrow keys simultaneously.

Figure 7: The 360° massage bubble jets provide full-body relaxation.

5. Mantenimiento

El mantenimiento regular es crucial para la longevidad y el rendimiento óptimo de su jacuzzi.

• Reemplazo del cartucho de filtro: The system will remind you to replace the filter cartridge after 168 hours of use. Regularly check and clean the filter to ensure efficient water circulation and cleanliness.
• Drenaje de agua: Periodically drain the hot tub water for cleaning or storage. Connect the drain hose to the designated drain outlet and allow the water to empty.
• Drying the Tub: After draining, connect the inflatable hose to the air outlet of the pump unit and activate the bubble function for 2-3 minutes. This will help blow out any remaining water from inside the spa pool, preventing mold and mildew.
• Limpieza: Clean the interior and exterior of the tub with mild soap and water. Avoid abrasive cleaners or harsh chemicals.
• Almacenamiento: When not in use for extended periods, ensure the tub is completely dry, deflated, and stored in a cool, dry place away from direct sunlight.

6. Solución de problemas

Esta sección aborda problemas comunes que puede encontrar con su jacuzzi. Si tiene problemas que no se mencionan aquí, póngase en contacto con atención al cliente.

7. Especificaciones

Detailed technical specifications for the Goplus Inflatable Hot Tub Spa.

Figure 8: Illustration of the premium laminated PVC material's durability.

8. Garantía y atención al cliente

For warranty information, technical assistance, or any product-related inquiries, please contact Goplus customer support. Keep your purchase receipt and model number (NP10259US) readily available when contacting support.

You can find contact information for Goplus customer support through their official websitio o el minorista donde se compró el producto.