Guía de instalación y uso del soporte de riel Picatinny Monstrum para Remington 700

1. Introducción

This manual provides detailed instructions for the installation and proper use of your Monstrum Picatinny Rail Mount and Extended Offset Scope Mount for Remington 700 Short Action rifles. Please read this guide thoroughly before installation to ensure correct setup and optimal performance.

Image 1.1: The Monstrum Picatinny Rail Mount and Extended Offset Scope Mount. This image displays both components of the bundle: the Picatinny rail base and the extended dual-ring scope mount.

2. Producto terminadoview

2.1 Características principales

• Montaje en riel Picatinny: Specifically designed for Short Action Remington 700 rifle platforms.
• Extended Dual Ring Scope Mount: Accommodates standard 30 mm diameter tube rifle scopes with 3 inches of spacing between rings.
• Offset Design: Provides 2 inches of forward extension for enhanced eye relief and shooting position flexibility.
• Integrated Recoil Stops: Designed to increase recoil resistance while minimizing weight.
• Heat-Treated Torx Screws: Prevents stripping and ensures secure attachment to the rifle.

2.2 Compatibilidad

This rail mount is compatible exclusively with Short Action Remington 700 models. Refer to the list below and the provided diagram to confirm your rifle's action type.

Compatible Short Action Calibers:

• .223 Remington
• .243 Winchester
• .308 Winchester
• 6.5 Creedmoor
• 7 mm Remington Mag
• 7 mm-08 Remington
• .257 Weatherby Mag
• .270WSM
• .22-250 Remington
• .300 Remington Ultra Mag
• .300 AAC Blackout
• .220 Swift

Image 2.1: Guide for identifying Remington 700 Short Action vs. Long Action rifles. This diagram illustrates how to determine your rifle's action type based on caliber and ejection port length.

3. Qué incluye

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• 1x 17-Slot Picatinny Rail (RM151-20)
• 1x Extended Dual Ring Scope Mount (30mm)
• 5x #6 Bolts (for rail attachment)
• 4x #8 Bolts (for rail attachment)
• 1x Torx Key (for installation)

Image 3.1: Included components. This image shows the 17-slot rail, five #6 bolts, four #8 bolts, and one Torx key.

4. Guía de instalación

Follow these steps to install the Monstrum Picatinny Rail Mount and Extended Offset Scope Mount onto your Remington 700 Short Action rifle.

4.1 Installing the Picatinny Rail Mount

1. Garantizar la seguridad: Always ensure your firearm is unloaded and pointed in a safe direction before beginning any work.
2. Superficie de montaje limpia: Clean the receiver's mounting holes and surface to remove any oil, grease, or debris.
3. Colocar el riel: Place the Monstrum Picatinny rail onto the receiver of your Remington 700 Short Action rifle, aligning the screw holes.
4. Insertar tornillos: Use the provided #6 or #8 bolts, as appropriate for your rifle's receiver, to secure the rail. Start all screws by hand to prevent cross-threading.
5. Apretar los tornillos: Using the supplied Torx key, tighten the screws evenly and securely. Do not overtighten, as this can damage the screws or the receiver. Refer to your rifle's manual for specific torque specifications if available.

Image 4.1: Installing the Picatinny rail. A hand is shown using the Torx key to tighten the screws on the Monstrum Picatinny rail mount, which is already positioned on a rifle receiver.

4.2 Installing the Extended Offset Scope Mount

Once the Picatinny rail is securely installed, you can attach the extended offset scope mount.

1. Attach Scope Mount: Place the extended offset scope mount onto the Picatinny rail, positioning it to achieve optimal eye relief for your scope.
2. Montaje seguro: Apriete el clamping screws on the scope mount to secure it to the Picatinny rail. Ensure it is firmly seated and does not move.
3. Install Scope: Place your 30mm diameter rifle scope into the rings of the mount.
4. Nivelar y apretar: Level the scope and then tighten the ring screws evenly, alternating between screws to ensure even pressure. Do not overtighten.

Image 4.2: The Monstrum Extended Dual Ring Scope Mount. This image provides a clear view of the 30mm extended offset scope mount, ready for installation on the Picatinny rail.

Image 4.3: Close-up of integral recoil stops and heat-treated Torx screws on the scope mount. This image highlights the design features that enhance stability and durability.

5. Understanding MOA (Minute of Angle)

This Monstrum Picatinny Rail Mount features a 20 MOA cant. Understanding the difference between 0 MOA and 20 MOA mounts is crucial for long-range shooting.

• 0 MOA Mount: The scope is mounted level with the bore of the gun. This is suitable for short to mid-range shooting where bullet drop is minimal or easily compensated for within the scope's adjustment range.
• 20 MOA Mount: The mount is canted downward at 20 MOA. This shifts the scope's elevation adjustment range downward by 20 MOA, allowing for more upward adjustment in the scope. This is beneficial for long-range shooting, as it provides additional elevation adjustment to account for significant bullet drop at extended distances.

Image 5.1: Visual comparison of 0 MOA and 20 MOA mounts. This diagram illustrates how a 20 MOA cant angles the scope downward relative to the bore, providing more upward adjustment for long-range shooting.

6. Especificaciones

6.1 Picatinny Rail (RM151-20)

• Compatibilidad: Remington 700 Short Action
• MOA: 20 MOA
• Número de ranuras: 17
• Longitud total: Aproximadamente 6.89 pulgadas

Image 6.1: Detailed dimensions of the Remington 700 Short Action Picatinny rail. This diagram shows the total length of 6.89 inches and specific measurements for front, center, and rear mounting points.

6.2 Extended Offset Scope Mount

• Diámetro del anillo: 30 milímetros
• Ring Spacing: 3.00 inches (center-to-center)
• Forward Extension: 2.00 pulgadas
• Longitud base: 5.50 pulgadas
• Ring Height (Centerline): 1.63 pulgadas / 41.28 mm

Image 6.2: Dimensional drawing of the extended offset scope mount. This image provides key measurements including ring spacing, base length, and forward extension.

Imagen 6.3: Frente view showing the 30mm ring diameter and 1.63-inch (41.28mm) centerline height of the scope mount.

7. Cuidado y mantenimiento

To ensure the longevity and reliable performance of your Monstrum rail mount and scope mount, follow these maintenance guidelines:

• Limpieza regular: Periodically clean the mount and rail with a soft cloth to remove dirt, dust, and residue. Avoid harsh chemicals that may damage the finish.
• Compruebe los sujetadores: After initial installation and periodically during use, check all screws for tightness. Recoil can sometimes loosen fasteners over time.
• Almacenamiento: Store your rifle and mounted accessories in a dry, temperature-controlled environment to prevent corrosion.

8. Solución de problemas

Si encuentra problemas durante o después de la instalación, considere lo siguiente:

• Mount Not Fitting: Double-check that your rifle is a Remington 700 Short Action. Refer to the compatibility section (2.2) and the provided diagrams.
• Montaje suelto: Ensure all screws are tightened to the appropriate specifications. If screws continue to loosen, consider using a thread-locking compound (e.g., blue Loctite) on the screw threads, applied sparingly.
• Scope Not Level: Re-adjust the scope within the rings, ensuring it is perfectly level before tightening the ring screws.

9. Garantía y soporte

For information regarding product warranty, returns, or technical support, please refer to the official Monstrum website or contact Monstrum customer service directly. Keep your purchase receipt as proof of purchase.