EAST OAK 50,000 BTU Patio Heater Instruction Manual

Información importante de seguridad

Please read and understand all instructions and warnings before assembling, operating, or servicing this heater. Failure to follow these instructions may result in fire, explosion, property damage, personal injury, or death.

• Este calentador de patio es sólo para uso en exteriores.
• Do not use on rainy days. When storing, use a protective cover.
• Keep combustible materials at least 48 inches away from the product.
• Any items stored above, next to, or under this heater may be subject to radiant heat and may be damaged.

Producto terminadoview

The EAST OAK 50,000 BTU Patio Heater (Model UR50BK2) is designed to provide powerful and efficient outdoor heating. Featuring a double-layer stainless steel burner, a stable conical barrel design, and a triple protection system, this heater ensures comfort and safety for your outdoor spaces.

Figure 1: EAST OAK 50,000 BTU Patio Heater (Model UR50BK2)

Figure 2: Product Size Information and Exploded View

Configuración y montaje

Assembly of the EAST OAK Patio Heater is designed to be straightforward, typically completed within 30 minutes by following the instructions. Ensure all protective layers are removed from components before assembly.

Pasos de montaje:

1. Conjunto base: Attach the wheel assembly to the base using the provided M8 flange nuts and M8x16 bolts. Ensure the wheel assembly is parallel to the base and tighten the bolts.
2. Anchoring Arms: Attach the three anchoring arms to the base using six M6 and six M6x10 bolts.
3. Soportes de apoyo: Mount the three support brackets using three M8x16 bolts. Place the bracket with the belt in the middle.
4. Lower Post: Place the lower post on the support brackets.
5. Regulator Insertion: Insert the regulator from the top end of the upper post. The sticker side should be connected to the burner assembly.
6. Montaje del quemador: Mount the burner assembly on the upper post with the four stainless steel bolts.
7. Post Connection: Insert the regulator from the top end of the lower post. Use four post bolts to secure the two posts together.
8. Tank Housing: Slide the tank housing down towards the base.
9. Conjunto reflector: Attach the six reflector panels to the center reflector using six M6x10 screws and six cap nuts. Install three washers and three spacers on top of the burner assembly. Place three more washers over the threaded end of the spacer. Attach the reflector assembly to the top using three washers and three wing nuts to secure.
10. Conexión del tanque de propano: Raise the tank housing and lock it with the top flange nuts. Place a 20 lb propane gas tank (not included) on top of the base. Use the belt to secure the gas canister. Attach the regulator to the cylinder and tighten connections by hand, ensuring it is fastened securely. Lower the tank housing.

Estabilidad básica:

The conical barrel design and included water tank (up to 26.45 lbs) enhance the product's wind-resistant performance. For additional stability, especially on cement or wood ground unsuitable for nails, expansion screws (not included) can be used to secure the unit to the ground.

Figure 3: Upgraded Base Design for Enhanced Stability

Instrucciones de funcionamiento

The heater features an easy one-touch ignition system and an adjustable control knob for heat output.

Procedimiento de encendido:

1. Asegúrese de que la perilla de control esté en la posición “APAGADO”.
2. Fully open the gas valve on the propane tank by turning it counter-clockwise.
3. After connecting a new tank, allow the pipeline to purge for at least one minute before attempting to light the heater.
4. Press and turn the variable control knob to the 'ON' position (counter-clockwise 90 degrees) and hold for 3-5 seconds.
5. While holding down the control knob, press the igniter button several times until the flame ignites.
6. Continue to hold the knob for about 30 seconds and then release.
7. If the flame does not light or goes out, repeat steps 4-6.
8. Wait at least 5 minutes before attempting to relight the heater.

Ajuste del calor:

Once ignited, the adjustable control knob allows you to regulate the heat output from low to high.

Sistema de protección de seguridad:

• Protección de inclinación: The system will automatically extinguish the flame if the heater is tilted more than 45 degrees.
• Protección contra el apagado de llamas: If the flame accidentally goes out, the system will automatically shut off the gas supply.

Figure 4: Triple Protection System Features

Mantenimiento

Proper maintenance ensures the longevity and safe operation of your patio heater.

• Limpieza: Regularly inspect and clean the burner assembly and gas jet nozzle to prevent blockages (e.g., from insects or debris).
• Almacenamiento: When not in use, especially during rainy weather or off-season, it is highly recommended to use a protective cover to shield the heater from elements and prevent rust.
• Inspección: Periodically check all connections and components for any signs of wear, damage, or leaks.

Solución de problemas

If you encounter issues with your patio heater, refer to the following common troubleshooting tips:

• El calentador no se enciende:
  • Asegúrese de que la válvula del tanque de propano esté completamente abierta.
  • Check if the propane tank is empty and replace if necessary.
  • Verify that the regulator is securely connected to the cylinder.
  • Allow sufficient time for the gas line to purge after connecting a new tank.
  • Ensure the control knob is pressed and held down while pressing the igniter.
• Flame Goes Out During Operation:
  • The tilt protection system may have activated if the heater was tilted.
  • The flame-out protection system may have activated due to a sudden gust of wind or low gas pressure.
  • Check the propane tank level.
• Baja emisión de calor:
  • Ensure the control knob is set to the desired heat level (High).
  • Check the propane tank for low fuel.

Presupuesto

Garantía

EAST OAK offers a 3-year warranty for this product. To claim your warranty, register your product within 90 days of purchase at eastoak.com/warranty. Customer service has been noted for being responsive and providing replacement parts when needed, even years after purchase.

Apoyo

For expert assistance or any inquiries regarding your EAST OAK Patio Heater, please contact us:

• Teléfono (EE. UU.): 1-833-EAST-OAK (1-833-327-8625)
• Horario de atención: Monday - Friday, 9:00 am - 5:00 pm PST/PDT
• Correo electrónico: soporte@eastoak.com
• Websitio: www.eastoak.com