SINGCALL E57

SINGCALL E57 Wireless SOS Emergency Call Button

Manual de usuario

1. Introducción

The SINGCALL E57 is a wireless SOS emergency call button designed to function as a transmitter within a caregiver pager system. This device is intended to be used in conjunction with a compatible SINGCALL receiver (not included) to create a complete call system. It provides a simple and effective way for individuals needing assistance, such as the elderly, patients, or those with disabilities, to alert a caregiver.

Nota importante: The E57 call button cannot be used as a standalone device. A SINGCALL receiver is required for the system to function.

2. Producto terminadoview

The E57 call button features a large, easily identifiable button for quick activation. Its compact and durable design ensures reliability in various environments.

SINGCALL E57 Wireless SOS Emergency Call Button front view

Figura 2.1: Frente view of the SINGCALL E57 Wireless SOS Emergency Call Button.

Características principales:

  • Tamaño compacto: Approximately 5.5 x 5.5 cm (2.2 x 2.2 inches).
  • Diseño a prueba de agua: IP55 rated, offering protection against dust and low-pressure water jets.
  • Amplio rango de temperatura de funcionamiento: Functions reliably between -20℃ to 50℃ (-4℉ to 122℉).
  • Rango de transmisión largo: Hasta 150 metros (500 pies) en áreas abiertas.
  • Portátil: Can be carried in a pocket, worn around the neck with a lanyard, or mounted on a wall.
SINGCALL E57 Wireless SOS Emergency Call Button with dimensions

Figure 2.2: Dimensions of the SINGCALL E57 Call Button.

SINGCALL E57 Wireless SOS Emergency Call Button showing waterproof feature

Figure 2.3: The E57 button demonstrating its IP55 waterproof rating and operating temperature range.

3. Configuración

3.1 Instalación de la batería

The E57 call button is powered by two CR2 batteries, which are typically included. To install or replace batteries:

  1. Carefully open the back cover of the call button.
  2. Insert the two CR2 batteries, ensuring correct polarity (+/-).
  3. Cierre de forma segura la cubierta trasera.

3.2 Pairing with a SINGCALL Receiver

The E57 call button must be paired with a compatible SINGCALL receiver to function. The pairing process typically involves placing the receiver into a pairing mode and then activating the call button.

General Pairing Steps (refer to your receiver's manual for specific instructions):

  1. Ensure your SINGCALL receiver is powered on and in close proximity to the E57 button.
  2. Activate the pairing mode on your SINGCALL receiver. This usually involves pressing a specific button on the receiver for a few seconds until an indicator light or sound confirms pairing mode.
  3. While the receiver is in pairing mode, press the large "CALL" button on the E57 transmitter.
  4. The receiver should indicate successful pairing (e.g., a beep, flash, or display update).
  5. Test the connection by pressing the E57 button again to ensure the receiver responds.

3.3 Montaje y colocación

The E57 button offers flexible placement options:

  • Uso portátil: Attach a lanyard (if provided) to wear it around the neck, or simply carry it in a pocket.
  • Montaje en pared: The button can be affixed to a wall using adhesive or screws (not included) for fixed locations like bathrooms or beside a bed. Ensure it is placed within the transmission range of the receiver.
SINGCALL E57 Wireless SOS Emergency Call Button being worn

Figura 3.1: Example of the E57 button being worn for easy access.

4. Instrucciones de funcionamiento

Once the E57 call button is paired with a SINGCALL receiver, operation is straightforward:

  1. To send an alert, simply press the large "CALL" button firmly.
  2. The button will transmit a wireless signal to the paired receiver.
  3. The receiver will then activate its alert mechanism (e.g., sound, vibration, light) to notify the caregiver.

Ensure the button is within the effective transmission range of the receiver for reliable operation. Obstacles such as thick walls or electronic interference can reduce the effective range.

Diagram showing wireless range of SINGCALL E57 button within a house

Figure 4.1: Illustration of the wireless range of the E57 button within a typical home environment.

5. Mantenimiento

5.1 Reemplazo de batería

When the call button's signal weakens or if it stops responding, it may be time to replace the batteries. Follow the battery installation steps in Section 3.1.

  • Use only CR2 type batteries.
  • Deseche las baterías viejas de manera responsable de acuerdo con las regulaciones locales.

5.2 Limpieza

To clean the E57 call button, wipe it with a soft, slightly damp paño. Evite utilizar limpiadores abrasivos, disolventes o productos químicos fuertes, ya que pueden dañar la superficie o los componentes internos del dispositivo.

5.3 Resistencia al agua

The E57 is IP55 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for use in environments where it might be exposed to splashes, such as a bathroom. However, it is no Diseñado para inmersión en agua.

6. Solución de problemas

  • El botón no responde:
    • Check the batteries. Replace them if necessary.
    • Ensure the button is within range of the receiver.
  • Receiver not receiving signal:
    • Verify that the E57 button is properly paired with the receiver (refer to Section 3.2 and your receiver's manual).
    • Check the distance between the button and the receiver. Move them closer if possible.
    • Ensure there are no significant obstructions (e.g., thick concrete walls, large metal objects) between the button and the receiver.
    • Check if the receiver is powered on and functioning correctly.
  • Interferencia:
    • If experiencing intermittent signals, try relocating the receiver or the button to avoid potential sources of wireless interference (e.g., Wi-Fi routers, cordless phones, microwaves).

For persistent issues, consult the user manual of your specific SINGCALL receiver or contact SINGCALL customer support.

7. Especificaciones

CaracterísticaEspecificación
ModeloE57
Dimensiones (L x An x Al)6.5 x 6.5 x 2.3 cm (2.56 x 2.56 x 0.91 pulgadas)
Peso40 gramos
Clasificación de impermeabilidadIP55
Temperatura de funcionamiento-20 ℃ a 50 ℃ (-4 ℉ a 122 ℉)
Fuente de poder2 pilas CR2 (incluidas)
Volumentage3 voltios
Alcance máximo150 metros (500 pies) en áreas abiertas
Código Postal702563609880
Referencia interna1939529031
Atrás view of SINGCALL E57 button showing model and FCC information

Figura 7.1: Atrás view of the E57 button with model and regulatory information.

8. Garantía y soporte

SINGCALL provides spare parts availability for 5 years within the EU for this product. For warranty claims, technical support, or further assistance, please contact SINGCALL customer service through their official websitio o el minorista donde se compró el producto.

Conserve su comprobante de compra para cualquier consulta relacionada con la garantía.

© 2024 SINGCALL. Todos los derechos reservados.