Freno WS-PR0T15

FRENAN Grow Light with Stand

Model: WS-PR0T15

Manual de instrucciones de usuario

1. Introducción

The FRENAN Grow Light with Stand is designed to provide optimal lighting conditions for indoor plants at various growth stages. This full-spectrum LED grow light features adjustable brightness, multiple spectral modes, and a convenient timer function, all supported by a stable, adjustable tripod stand and flexible goosenecks.

FRENAN Grow Light with Stand, showing the main unit with four light bars, a remote control, and various potted plants around it.

Figure 1: FRENAN Grow Light with Stand and remote control.

2. Instrucciones de seguridad importantes

  • Lea todas las instrucciones antes de usar.
  • Seguridad eléctrica: Asegúrese de que la fuente de alimentación coincida con el volumen especificado.tage (120 voltios). No lo utilice con un cable o enchufe dañado.
  • Protección ocular: Avoid looking directly at the lights for extended periods when they are on. Use the remote control for adjustments to minimize direct exposure.
  • Ventilación: Ensure adequate ventilation around the grow light to prevent overheating.
  • Exposición al agua: Do not expose the grow light to water or operate in damp conditions. This product is for indoor use only.
  • Niños y mascotas: Mantenga el dispositivo fuera del alcance de los niños y las mascotas.
  • Estabilidad: Ensure the tripod stand is fully extended and stable on a flat surface before use to prevent tipping.
  • Desmontaje: No intente desmontar ni modificar la lámpara de cultivo. Encargue cualquier reparación a personal cualificado.

3. Características del producto

  • Soporte de trípode ajustable: The stable and durable tripod stand can be adjusted in height from 15 inches (38 cm) to 63 inches (160 cm), accommodating various plant sizes and setups.
  • Highly Efficient Full Spectrum: Provides a comprehensive light spectrum to support plant growth at all stages, effectively supplementing natural sunlight.
  • Multiple Spectral Modes: Features 3 distinct light modes:
    • Luz blanca: Promotes overall plant growth and chlorophyll synthesis.
    • Luz roja: Enhances flowering, fruiting, and photosynthesis.
    • Mixed Light (Red + White): Combines benefits for comprehensive plant development.
  • 10 Dimmable Brightness Levels: Adjust light intensity from 10% to 100% to suit specific plant needs and growth stages.
  • Auto Cycle On/Off Timer: Built-in circular-memory timing function with options for 4, 8, or 12 hours. The light will automatically turn on and off daily according to your setting.
  • Cuellos de cisne ajustables de 360°: Four independently adjustable goosenecks allow for precise light positioning and wider coverage.
  • Diseño duradero: Excellent heat dissipation ensures a long lifespan of approximately 50,000 hours.
  • Mando a distancia: Ajuste cómodamente la configuración a distancia.
Diagram showing three types of light bars (white, red, and mixed spectrum) and their effects on plant growth.

Figure 2: Full Spectrum Explanation.

Two FRENAN Grow Lights at different heights, illustrating the adjustable stand from 15 inches minimum to 63 inches maximum.

Figura 3: Altura del soporte ajustable.

Images demonstrating 3 lighting spectrums (white, red, mixed), 4 lighting modes (single, double, quadruple light bars), and 10 dimming levels.

Figure 4: Lighting Modes and Dimming Levels.

Diagram showing the auto on/off timer function with options for 4, 8, and 12 hours, along with the remote control and inline controller.

Figure 5: Auto On/Off Timer Function.

4. Instrucciones de configuración

Follow these steps to assemble your FRENAN Grow Light:

  1. Desempaquetar componentes: Carefully remove all components from the packaging. Verify that all parts are present: tripod stand, main pole, four gooseneck light bars, inline controller, and remote control.
  2. Montaje del trípode: Extend the legs of the tripod stand until they are fully spread and stable. Tighten any locking mechanisms to secure the legs.
  3. Fijar el poste principal: Insert the main pole into the top of the tripod stand. Secure it by tightening the screw or clamp en el podio.
  4. Ajustar la altura del poste: Loosen the height adjustment knob on the main pole, extend it to your desired height (between 15 and 63 inches), and then tighten the knob securely.
  5. Conectar barras de luz: Attach each of the four gooseneck light bars to the top of the main pole. Ensure they are securely screwed in or clipped into place.
  6. Posición de cuellos de cisne: Adjust the flexible goosenecks to direct the light bars towards your plants.
  7. Conecte la electricidad: Plug the inline controller into a standard 120V AC power outlet.

5. Instrucciones de funcionamiento

The FRENAN Grow Light can be operated using the inline controller or the included remote control.

5.1 Encendido y apagado

  • Presione el Botón de encendido on the inline controller or remote control to turn the light on or off.

5.2 Ajuste del brillo

  • Utilice el Subir brillo (+) y Bajar el brillo (-) buttons on the inline controller or remote control to cycle through 10 dimmable brightness levels (10% to 100%).

5.3 Changing Spectral Modes

Presione el Botón de modo (often depicted as a light bulb icon or 'M') on the inline controller or remote control to switch between the three spectral modes:

  1. Luz blanca: For general plant growth.
  2. Luz roja: For flowering and fruiting stages.
  3. Mixed Light (Red + White): For comprehensive growth support.
Indoor plants illuminated by white spectrum grow lights.

Figure 6: White Spectrum in Use.

Indoor plants illuminated by red spectrum grow lights.

Figure 7: Red Spectrum in Use.

Indoor plants illuminated by mixed red and white spectrum grow lights.

Figure 8: Mixed Spectrum in Use.

5.4 Configuración del temporizador

The timer function allows the light to automatically turn on and off at the same time each day.

  1. Turn the grow light ON at the desired time you want the cycle to begin.
  2. Presione el Botón del temporizador (4H, 8H, or 12H) on the inline controller or remote control to select the desired duration.
  3. The light will operate for the selected duration and then turn off. It will automatically turn on again at the same time the next day.
  4. To cancel the timer, press the timer button again until no timer indicator is lit, or simply turn off the light manually.

Nota: If the grow light is unplugged, the timer setting will reset. You will need to re-set the timer once power is restored.

6. Mantenimiento

Proper maintenance ensures the longevity and optimal performance of your FRENAN Grow Light.

  • Limpieza: Disconnect the power before cleaning. Use a soft, dry cloth to wipe down the light bars and stand. Do not use abrasive cleaners or immerse any part in water.
  • Almacenamiento: If storing the grow light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
  • Inspección: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.

7. Solución de problemas

If you encounter issues with your FRENAN Grow Light, refer to the following common problems and solutions:

ProblemaPosible causaSolución
La luz no se enciende.Sin energía, conexión suelta, toma de corriente defectuosa.Check if the power cord is securely plugged in. Test the outlet with another device. Ensure the power button is pressed.
Timer function not working or resetting.Interrupción de energía, configuración incorrecta del temporizador.The timer resets if unplugged. Re-set the timer after any power interruption. Ensure the correct timer duration (4H, 8H, 12H) is selected.
Lights flicker or turn off randomly.Loose connection, internal fault, power supply issue.Check all connections. Try plugging into a different outlet. If the issue persists, contact customer support.
El control remoto no responde.Batería agotada, control remoto fuera de alcance, obstrucción.Ensure the remote control has a working battery. Point the remote directly at the inline controller. Reduce distance to the light.
Stand is unstable or collapses.Legs not fully extended, locking mechanism loose, damaged stand.Ensure tripod legs are fully spread and all locking mechanisms are tightened. Place on a flat, stable surface. If damaged, contact customer support.

8. Especificaciones del producto

  • Marca: FRENANO
  • Número de modelo: WS-PR0T15
  • Color: Full Spectrum (White)
  • Tipo de fuente de luz: LED grow lights
  • Número de fuentes de luz: 4
  • Características de la bombilla: Regulable
  • Fuente de energía: Eléctrico con cable
  • Volumentage: 120 voltios
  • Material de la sombra: Aluminio
  • Tipo de montaje: Montaje en el piso
  • Altura ajustable: 15 pulgadas a 63 pulgadas
  • Peso del artículo: 3.4 libras (aproximadamente 1.55 kg)
  • Dimensiones del paquete: 17.13 x 5.98 x 3.94 pulgadas (aproximadamente 43.5 x 15.2 x 10 cm)
  • Código postal: 700773434278
  • Fabricante: SHENZHEN GIP OPTOELECTRONICS CO., LTD.

9. Garantía y atención al cliente

FRENAN products are designed for reliability and performance. If you experience any issues with your grow light, please contact FRENAN customer service for assistance.

  • Garantía: Please refer to the product packaging or the official FRENAN websitio para obtener detalles específicos de la garantía y la duración.
  • Atención al cliente: For technical support, troubleshooting, or warranty claims, please contact FRENAN customer service through the contact information provided with your purchase or on the official FRENAN website. When contacting support, please have your model number (WS-PR0T15) and purchase date ready.