Introducción
The VOX VFS3 is a dedicated 3-button footswitch designed to enhance the functionality and control of your VOX Mini Go series amplifier. This footswitch allows for hands-free operation of various amplifier features, such as program switching, effect on/off, or looper control, depending on your specific Mini Go amplifier model. This manual provides essential information for the proper setup, operation, and maintenance of your VFS3 footswitch.
Información de seguridad
- No exponga la unidad a la lluvia ni a la humedad.
- Evite colocar la unidad cerca de fuentes de calor o bajo la luz solar directa.
- No intente desmontar ni modificar la unidad. Encargue cualquier reparación a personal cualificado.
- Use only with compatible VOX Mini Go ampsalvavidas.
- Mantener fuera del alcance de los niños.
Contenido del paquete
- VOX VFS3 3-Button Footswitch (with integrated cable)
- Manual de usuario (este documento)
Producto terminadoview
The VFS3 footswitch features three robust buttons, each with an associated LED indicator, and an integrated cable for connection to your ampmás duradero.
Frente view of the VOX VFS3 3-Button Footswitch. It features three silver footswitches labeled 1, 2, and 3, each with a corresponding LED indicator above it. The VOX logo is on the left, and 'VFS3' is on the bottom right.
Lado view of the VOX VFS3 footswitch, highlighting its compact and durable metal casing.
Atrás view of the VOX VFS3 footswitch, displaying the integrated cable that connects to the amplifier. The VOX logo is prominently featured.
Configuración
- Connect the Footswitch: Locate the footswitch input jack on your VOX Mini Go amplifier. This is typically a 3.5mm (1/8-inch) stereo jack.
- Insertar el cable: Firmly insert the integrated 3.5mm cable from the VFS3 footswitch into the footswitch input jack on your Mini Go ampmás duradero.
- Encendido: Turn on your VOX Mini Go amplifier. The footswitch is powered by the amplifier, so no external power supply is needed for the VFS3.
- Verificar conexión: El amplifier should recognize the footswitch. Refer to your Mini Go amplifier's manual for specific indications or settings related to footswitch connection.
The VOX VFS3 footswitch connected to a VOX Mini Go amplifier, illustrating the proper connection of the cable to the ampconector de entrada del amplificador.
Instrucciones de funcionamiento
The specific functions controlled by the VFS3 footswitch buttons (1, 2, and 3) are determined by the connected VOX Mini Go amplifier model and its current settings. Please consult the user manual for your specific VOX Mini Go amplifier for detailed information on footswitch assignments and configuration.
Common Functions (May Vary by Amplifier Model):
- Program/Preset Switching: Buttons may be assigned to switch between amplifier programs or presets (e.g., Clean, Overdrive, Distortion).
- Efecto activado/desactivado: Control individual effects (e.g., Reverb, Delay, Chorus) by toggling them on or off.
- Control del looper: For Mini Go models with a built-in looper, the buttons often control looper functions such as:
- Botón 1: Grabar/Reproducir
- Botón 2: Detener
- Botón 3: Clear/Undo
- Pulsar tempo: Alguno amplifiers may allow one of the buttons to be used for tap tempo functionality for time-based effects.
The LEDs above each button indicate the status of the assigned function (e.g., effect on/off, selected program). Refer to your amplifier's manual for the meaning of specific LED colors or states.
Mantenimiento
- Limpieza: Limpie la unidad con un paño suave y seco. No utilice limpiadores abrasivos, ceras ni disolventes.
- Almacenamiento: When not in use for extended periods, store the footswitch in a clean, dry environment away from extreme temperatures.
- Cuidado de cables: Avoid sharp bends or kinks in the integrated cable to prevent damage.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El pedal no responde | Cable no completamente insertado; Amplifier not powered on; Incorrect ampConfiguración del elevador. | Ensure the 3.5mm cable is securely connected to the amplificador. Verificar el amplifier is powered on. Check your Mini Go amplifier's settings to ensure footswitch control is enabled and configured correctly. |
| Los LED no se encienden | No power from amplifier; Faulty connection. | Confirmar el amplifier is on and the cable is properly connected. The footswitch draws power from the ampmás duradero. |
| Buttons perform unexpected functions | Footswitch assignments are incorrect on the ampmás duradero. | Refer to your VOX Mini Go amplifier's manual to reconfigure the footswitch button assignments. |
Presupuesto
- Modelo: VFS3
- Dispositivos compatibles: VOX Mini Go Ampsalvavidas
- Tipo de conector: 3.5mm Jack (integrated cable)
- Material: Chasis de metal
- Dimensiones (L x An x Al): Aproximadamente 7.9 x 3 x 2.5 pulgadas (20.1 x 7.6 x 6.4 cm)
- Peso: Aproximadamente 1.1 libras (0.5 kg)
- Fuente de energía: Desarrollado por conectado ampmás vivaz
Garantía y soporte
For warranty information and technical support, please refer to the documentation provided with your VOX Mini Go amplifier or visit the official VOX webSitio. Conserve su recibo de compra como comprobante de compra.