1. Másview
The Audiobank AP15 is a 1/2 DIN car audio digital bass processor designed to enhance and restore low-frequency information in your car audio system. It accurately recreates and injects missing bass notes, providing efficient bass equalization and maximum control for your subwoofer. This unit is engineered to deliver improved bass performance and sound quality.
2. Características principales
- Digital Bass Maximizer and Restoration Processor
- Accurately recreates and injects low-frequency information into the signal path
- Efficient bass equalization circuit for maximum bass control
- Includes a dash-mount remote control for convenient bass level adjustment
- Integrated subsonic filter
- Lighted bass restoration display
- Frequency response: 10-10000Hz output
- Input noise rejection: 60dB
3. Componentes del producto
Figure 1: Audiobank AP15 Digital Bass Processor with included remote bass knob.
Figure 2: Dash-mount remote control for bass level adjustment.
The package includes the AB-AP15 Bass Processor, a dash-mount Bass Knob, and a user manual.
4. Configuración e instalación
Una instalación correcta es crucial para un rendimiento óptimo. Se recomienda que la instalación la realice un técnico de audio para automóviles cualificado.
4.1 conexiones de cableado
Consulte el diagrama a continuación para ver las conexiones de cableado típicas. Asegúrese de que todas las conexiones estén seguras y correctamente aisladas.
Figure 3: Rear panel connections of the Audiobank AP15.
- Conexión de energía: Connect the +12V terminal to a constant +12V power source from your vehicle's battery. Connect the GND terminal to a solid chassis ground point.
- Encendido remoto: Conecte el terminal REM a la salida de encendido remoto de su unidad principal o amplifier. This will turn the AP15 on and off with your audio system.
- Entrada de audio: Connect the balanced input (L/R) from your head unit's RCA outputs or a line output converter (if using speaker-level inputs) to the AP15's input terminals.
- Salida de audio: Connect the output (L/R) from the AP15 to the RCA inputs of your amplizador(es).
- Control remoto Dash: Connect the included dash-mount bass knob to the "DASH REM" port on the AP15 using the provided cable.
4.2 Montaje
The Audiobank AP15 is a 1/2 DIN unit, designed for flexible mounting. Choose a location that is dry, well-ventilated, and away from direct heat or moisture. Secure the unit using appropriate screws and mounting hardware.
5. Instrucciones de funcionamiento
The AP15 features several controls to fine-tune your bass experience.
Figure 4: Top panel controls of the Audiobank AP15.
- Control amplio: This knob adjusts the width of the bass restoration effect. Turning it clockwise increases the range of frequencies affected by the bass restoration.
- Control de barrido: This knob allows you to select the center frequency for the bass restoration. Adjust it to target the specific low frequencies you wish to enhance.
- Bass Control Knob (Dash Remote): Use the remote knob to conveniently adjust the overall bass level from your driving position.
- Subsonic Filter Switch: The AP15 includes a subsonic filter to protect your subwoofers from damaging ultra-low frequencies. Select the desired cutoff frequency (35Hz, 50Hz, or 80Hz) using the switch.
- LED de encendido: Indica cuando la unidad está encendida.
- Bass Restoration Display: The lighted display provides a visual indication of the bass restoration activity.
Start with the WIDE and SWEEP controls at their minimum settings and gradually increase them while listening to your audio to find the optimal bass enhancement for your system and preferences. Use the dash remote for real-time adjustments.
6. Mantenimiento
- Mantenga la unidad limpia y sin polvo. Utilice un paño suave y seco para limpiarla.
- Evite exponer la unidad a temperaturas extremas, humedad o luz solar directa.
- Asegúrese de que todas las conexiones estén bien sujetas. Revise periódicamente el cableado para detectar cualquier signo de desgaste o daño.
- No intente abrir la unidad ni realizar reparaciones usted mismo, ya que esto anulará la garantía.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin energía/La unidad no se enciende |
|
|
| Sin salida de graves |
|
|
| bajo distorsionado |
|
|
| Ruido del motor/Sonido chirriante |
|
|
8. Especificaciones
| Característica | Detalle |
|---|---|
| Nivel de entrada máximo | 15V RMS |
| Nivel máximo de salida | pico de 13.5 V |
| Respuesta de frecuencia | 10-100,000 Hz |
| T.H.D Rating | 0.003% |
| Relación señal a ruido | 130 dB |
| Rechazo de ruido de entrada balanceada | >60dB |
| Impedancia de entrada | 10,000 ohmios |
| Impedancia de salida | 150 ohmios |
| Consumo de energía | 150 mA |
| Clasificación de fusible recomendada | 1 Amp |
| Dimensiones | 6-1/2"D x 9"W x 2-3/4"H |
| Peso del artículo | 1.8 libras |
| Material | Plástico |
9. Garantía y soporte
For warranty information and technical support, please refer to the documentation included with your purchase or contact Audiobank customer service. Keep your proof of purchase for any warranty claims.
Para obtener más ayuda, visite el Audiobank brand store on Amazon.