EBTOOLS Open Face Motorcycle Helmet with UV Visor User Manual

1. Introducción

Thank you for choosing the EBTOOLS Open Face Motorcycle Helmet. This manual provides essential information for the proper setup, operation, maintenance, and safety of your helmet. Please read these instructions carefully before use to ensure your safety and the longevity of the product. Keep this manual for future reference.

2. Producto terminadoview

The EBTOOLS Open Face Motorcycle Helmet is designed for comfort and protection during motorcycle and scooter rides. It features a lightweight, high-density construction, making it approximately 20% lighter than traditional helmets. The helmet includes UV-protective goggles to shield your eyes and face from harmful UV rays.

Características principales:

• Diseño liviano: Constructed from high-density materials for reduced weight and enhanced comfort.
• Protección UV: Equipped with transparent UV goggles to protect eyes from sun damage.
• Forro cómodo: Soft interior lining ensures a comfortable fit for extended wear.
• Detachable Neck Scarf: A removable leather neck scarf provides versatility for different weather conditions.
• Construcción duradera: Made from high-quality synthetic leather, polycarbonate (PC), and foam for durability.

3. Contenido del paquete

Al abrir el paquete, verifique que estén incluidos todos los siguientes elementos:

• 1 x EBTOOLS Open Face Motorcycle Helmet
• 1 x UV Goggles (transparent)
• 1 x Detachable Neck Scarf (leather)
• 1 visera para casco

4. Especificaciones

5. Configuración

5.1. Ajuste del casco

Proper helmet fit is crucial for safety and comfort. Follow these steps to ensure a correct fit:

1. Measure Head Circumference: Use a tape measure to find the circumference of your head, just above your eyebrows. This helmet is designed for head circumferences between 54-60 cm.
2. Pruébate el casco: Place the helmet firmly on your head. It should feel snug all around, without excessive pressure points.
3. Comprobar movimiento: With the chin strap unfastened, try to rotate the helmet from side to side and front to back. There should be minimal movement, and your skin should move with the helmet.
4. Abroche la correa de la barbilla: Secure the chin strap firmly. It should be tight enough so that the helmet cannot be pulled off your head, but not so tight as to cause discomfort.

5.2. Attaching the UV Goggles

The UV goggles are designed to be worn with the helmet. They typically feature an elastic strap that fits around the back of the helmet.

1. Position the goggles over your eyes.
2. Stretch the elastic strap around the back of the helmet, ensuring it sits securely in the designated groove or over the helmet's edge.
3. Adjust the strap for a snug fit that holds the goggles in place without causing discomfort.

5.3. Attaching/Detaching the Neck Scarf

The helmet includes a detachable leather neck scarf for added warmth and comfort. It attaches to the helmet via snaps or a similar fastening mechanism.

• Adjuntar: Align the snaps on the neck scarf with the corresponding fasteners on the helmet's interior or lower edge and press firmly until secured.
• Despegar: Gently pull the snaps apart to remove the neck scarf.

6. Instrucciones de funcionamiento

Once the helmet is properly fitted and all accessories are attached, you are ready for use.

• Always ensure the chin strap is securely fastened before riding.
• Adjust the UV goggles for clear vision and optimal eye protection.
• Periodically check the fit of your helmet during long rides to ensure it remains snug and comfortable.
• Never ride with a loose or improperly fastened helmet.

7. Mantenimiento y cuidado

Un mantenimiento adecuado prolongará la vida útil de su casco y garantizará sus capacidades de protección.

7.1. Limpieza del exterior del casco

• Utilice un paño suave y seco.amp cloth with mild soap and water to clean the synthetic leather and polycarbonate shell.
• Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the helmet's finish and materials.
• Dry the helmet thoroughly with a clean, soft cloth.

7.2. Cleaning the UV Goggles

• Gently wipe the goggle lenses with a soft, lint-free cloth and a specialized lens cleaner or mild soap and water.
• Do not use abrasive materials or paper towels, as they can scratch the lenses.
• Allow the goggles to air dry or gently pat dry with a microfiber cloth.

7.3. Cleaning the Interior Lining and Neck Scarf

• The interior foam lining can be spot cleaned with a damp Paño y jabón suave.
• If the neck scarf is detachable, it can be hand-washed with mild soap and air-dried. Ensure it is completely dry before reattaching.

7.4. Almacenamiento

• Guarde el casco en un lugar fresco y seco, lejos de la luz solar directa y de temperaturas extremas.
• Avoid storing the helmet near chemicals or solvents that could degrade its materials.

8. Información de seguridad

Su seguridad es primordial. Por favor, respete las siguientes normas de seguridad:

• Always wear a properly fitted and fastened helmet when riding a motorcycle or scooter.
• This helmet is designed for recreational use and may not meet all certification standards for competitive racing or specific regional regulations. Verify local requirements.
• Inspect your helmet regularly for any signs of damage, such as cracks, dents, or worn straps. Replace the helmet immediately if any damage is found.
• Never modify your helmet in any way, as this can compromise its protective integrity.
• Avoid exposing the helmet to extreme heat or cold, as this can affect its materials.
• Even minor impacts can compromise a helmet's protective capabilities. If your helmet sustains an impact, it should be replaced, even if visible damage is not apparent.

9. Solución de problemas

If you encounter any issues with your EBTOOLS helmet, consider the following:

• El casco se siente suelto: Re-check the chin strap adjustment. Ensure the helmet size is appropriate for your head circumference.
• Empañamiento de las gafas: Ensure goggles are clean. Consider anti-fog treatments if persistent.
• Molestias durante el uso: Re-evaluate the fit. Ensure no pressure points. The helmet should feel snug but not painful.
• Componentes dañados: If any part of the helmet (shell, strap, goggles) is damaged, discontinue use immediately and consider replacement.

10. Garantía y soporte

For warranty information or product support, please refer to the retailer's return policy or contact EBTOOLS customer service directly. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the EBTOOLS store on Amazon: Tienda EBTOOLS