1. Producto terminadoview
The Air-Con 24000 BTU Mini Split Air Conditioner is a ductless AC/heating system designed to provide efficient climate control for your space. This 2-ton unit features an 18 SEER inverter heat pump, offering both cooling and heating capabilities. It comes pre-charged and includes essential components for installation.

Image 1.1: Complete Air-Con Mini Split System, including indoor unit, outdoor unit, remote control, copper lineset, and electrical wiring.
2. Configuración e instalación
Proper installation of this mini split system requires a licensed HVAC technician. The unit is pre-charged with refrigerant, simplifying the process, but professional expertise is crucial for safe and efficient operation.
2.1 Componentes incluidos
- Unidad interior
- Unidad exterior
- Mando a distancia
- 15' Copper Lineset
- 15' Signal and Power Electrical Cables

Image 2.1: Essential installation components: remote control, copper lineset, and electrical wiring.
2.2 Pautas de instalación
- Selección del sitio: Choose appropriate locations for both the indoor and outdoor units, ensuring adequate airflow and clearance.
- Montaje: Monte de forma segura la unidad interior en una pared y la unidad exterior en una superficie estable o en un soporte de pared.
- Conexión de conjunto de líneas: Connect the pre-flared copper lineset between the indoor and outdoor units. Ensure proper torque to prevent leaks.
- Cableado eléctrico: Connect the signal and power cables according to the wiring diagram provided in the full installation manual. This must be done by a qualified electrician.
- Aspirar: A licensed HVAC technician must evacuate the system to remove non-condensable gases and moisture.
- Comprobación de fugas: Realice una verificación exhaustiva de fugas en todas las conexiones.
- Encendido: Once all connections are secure and checked, apply power to the system.
Warning: Installation by unqualified personnel can lead to property damage, personal injury, or death. Always use a licensed HVAC technician.
3. Instrucciones de funcionamiento
The Air-Con Mini Split system offers various modes and features for optimal comfort and energy efficiency.
3.1 Funciones de control remoto

Image 3.1: The remote control allows access to all operating modes and settings.
- ENCENDIDO/APAGADO: Enciende o apaga la unidad.
- MODO: Recorre los modos de funcionamiento: Automático, Frío, Calor, Seco (Deshumidificador), Ventilador.
- VENTILADOR: Ajusta la velocidad del ventilador (Automático, Bajo, Medio, Alto).
- TEMPERATURA +/-: Ajusta la temperatura deseada.
- SWING Controls horizontal and vertical louver motion for air distribution.
- DORMIR: Activates sleep mode for quiet operation and optimized temperature control during sleep.
- TURBO: Engages turbo mode for rapid heating or cooling.
- MINUTERO: Sets a 24-hour timer for automatic on/off operation with last-setting memory.
- DESHUMIDIFICADOR: Dedicated mode for moisture removal.
3.2 Funciones especiales
- Tecnología inversora: Optimizes compressor speed to maintain desired temperature, reducing energy consumption and operating costs.
- Limpieza automática: Prevents mildew growth within the indoor unit by drying the evaporator coil after cooling operation.
- Reinicio automático: Restaura la configuración anterior después de una interrupción de energía.
- WIFI Ready: Compatible with optional remote systems (e.g., Cielo Breez, sold separately) for smart control.
4. Mantenimiento
Regular maintenance ensures the longevity and efficiency of your Air-Con Mini Split system. It is recommended to have a licensed HVAC technician perform annual inspections and servicing.
4.1 Mantenimiento del usuario
- Limpieza del filtro de aire: Regularly clean or replace the air filters in the indoor unit to maintain airflow and air quality. Refer to the full manual for specific instructions on filter access.
- Limpieza exterior: Wipe down the exterior of both units with a soft, damp tela. No utilice productos químicos agresivos.
4.2 Mantenimiento profesional
A licensed HVAC technician should perform the following tasks annually:
- Comprobación del nivel de refrigerante: Verify proper refrigerant charge.
- Limpieza de la bobina: Clean indoor and outdoor coils for optimal heat transfer.
- Comprobación del sistema de drenaje: Ensure the condensate drain is clear and functioning correctly.
- Conexiones eléctricas: Inspect all electrical connections for tightness and wear.
- Fan Motor and Blades: Check for proper operation and cleanliness.
5. Solución de problemas
If you encounter issues with your Air-Con Mini Split system, review the following common troubleshooting steps. For complex problems, contact a licensed HVAC technician.
5.1 Problemas comunes
- La unidad no se enciende:
- Verifique la fuente de alimentación y el disyuntor.
- Asegúrese de que las baterías del control remoto funcionen correctamente.
- Refrigeración/calefacción insuficiente:
- Verify correct mode and temperature settings.
- Limpiar filtros de aire.
- Asegúrese de que la unidad exterior no esté obstruida.
- Check for closed windows or doors.
- Ruidos inusuales:
- A gurgling sound is normal due to refrigerant flow.
- Rattling or grinding noises may indicate a loose component or debris; contact a technician.
- Fuga de agua de la unidad interior:
- Check if the condensate drain line is clogged or kinked.
- Asegúrese de que la unidad esté nivelada.
If these steps do not resolve the issue, please contact Air-Con customer support or a certified HVAC professional.
6. Especificaciones
Detailed technical specifications for the Air-Con 24000 BTU Mini Split Air Conditioner.

Imagen 6.1: Dimensiones de las unidades interior y exterior.
| Característica | Especificación |
|---|---|
| Marca | Air-Con |
| Número de modelo | ASRCI4H4S24-ASREM4H4S24 |
| Capacidad | 2 toneladas (24000 BTU) |
| Eficiencia (VISIDENTE) | 18 SEER |
| Volumentage | 230 voltios |
| Nivel de ruido | 59 decibelios |
| Refrigerante | R410A |
| Tipo de instalación | Sistema dividido |
| Factor de forma | Mini-Split |
| Características especiales | Dehumidifier, Heating And Cooling Function, Inverter Compressor, Remote Controlled, Silent Mode |
| Dimensiones de la unidad interior | 42 3/4" (ancho) x 12 3/8" (alto) x 9 5/16" (profundidad) |
| Dimensiones de la unidad exterior | 33 7/8" (ancho) x 25 9/16" (alto) x 12 3/16" (profundidad) |
| Componentes incluidos | Remote Control, Copper Tubing, Power Cable, Signal Cable |
7. Garantía y soporte
Air-Con provides comprehensive warranty coverage and support for your product.
7.1 Información de garantía
- Compresor: 7 Years (Registration Required)
- Regiones: 5 Years (Registration Required)
Please ensure you register your product to activate the full warranty terms. Refer to the warranty card included with your product for detailed terms and conditions.
7.2 Atención al cliente
For technical assistance, warranty claims, or general inquiries, please contact Air-Con customer support. Air-Con offers USA-based parts and support.
Contact information can typically be found on the Air-Con official websitio o en la documentación proporcionada con su unidad.