Minecraft TNT Block Desk Lamp Manual de instrucciones

Producto terminadoview

The Minecraft TNT Block Desk Lamp is a novelty lighting fixture designed for indoor use. It features a unique TNT block design with a Creeper puller for operation. This lamp is energy-efficient and comes with an LED bulb included.

Figure 1: Minecraft TNT Block Desk Lamp

This image displays the full Minecraft TNT Block Desk Lamp, mostrarasing its red and white TNT block shade, silver stand, and green Creeper puller, all resting on a pixelated grass block base.

Instrucciones de instalación

1. Desembalaje: Retire con cuidado todos los componentes del embalaje. Asegúrese de que estén todas las piezas:amp baseamp stand, TNT block shade, Creeper puller, and LED bulb.
2. Asamblea de sombra: The TNT block shade may be inverted for packaging. Gently unscrew the shade from the lamp stand, flip it to the correct upright position, and re-screw it securely onto the stand.
3. Instalación de la bombilla: Insert the included E26 LED bulb into the lamp's socket. Ensure it is screwed in firmly but do not overtighten.
4. Colocación: Coloque la lamp on a stable, flat tabletop surface. Ensure the power cord can reach a suitable electrical outlet without strain.
5. Conexión de energía: Conecta el lamp's cord into a standard 120V AC electrical outlet.

Figura 2: Lamp Conexión de energía

This image shows the back of the Minecraft TNT Block Desk Lamp, highlighting the power cord extending from the base, ready for connection to an electrical outlet.

Instrucciones de funcionamiento

The Minecraft TNT Block Desk Lamp is operated using the attached Creeper puller.

• Encender: Gently pull down on the Creeper figure attached to the ball chain. The lamp se iluminará.
• Apagar: Pull down on the Creeper figure again. The lamp se apagará.

Figura 3: Lamp en uso

This image shows the Minecraft TNT Block Desk Lamp placed on a light-colored desk, next to books and a mug, demonstrating its use as a functional and decorative item.

Mantenimiento

• Limpieza: Desconecte el lamp from the power outlet before cleaning. Wipe the lamp shade and base with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Reemplazo de bombilla: Asegúrese de que lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old E26 bulb and screw in a new E26 LED bulb of appropriate wattage (máximo 10W).
• Cuidado general: Evite colocar el lamp in direct sunlight or near heat sources. Do not expose to water or high humidity.

Solución de problemas

Note: While the product description mentions USB connectivity, this lamp is primarily designed for corded electric operation via a standard US plug (120V AC). The bulb socket is rated for up to 250V, allowing for plug modification in regions with different voltage standards, but this should only be performed by a qualified electrician.

Presupuesto

Garantía y soporte

Este manual no proporciona información específica sobre la garantía de este producto. Consulte el embalaje del producto o el manual del vendedor. websitio para obtener detalles sobre la cobertura y los términos de la garantía.

For technical support or further assistance, please contact the manufacturer or the point of purchase.