Introducción
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Información de seguridad
Siga siempre las precauciones básicas de seguridad al instalar o utilizar productos eléctricos para reducir el riesgo de incendio, descarga eléctrica y lesiones personales.
- Apagado: Apague siempre la fuente de alimentación en el disyuntor principal antes de instalar o reemplazar elamp.
- Uso exclusivo en interiores: Este lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Base correcta: Asegúrese de que lamp holder is compatible with an E27 base.
- Volumentage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampRequisitos de 's.
- No regulable: Este lamp is not dimmable. Do not use it with dimmer switches.
- Comodidad para los ojos: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Contenido del paquete
El paquete contiene:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Instrucciones de instalación
- Apagar la energía: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Quitar la vieja Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp titular.
- Instalar nuevo Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Posicionamiento: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Restaurar energía: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Instrucciones de funcionamiento
This Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Encendido/apagado automático: El lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Sensor de luz diurna: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Sensor de movimiento: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Calidad de la luz: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Mantenimiento
The Philips LED Lamp with Sensor requires minimal maintenance.
- Limpieza: Asegúrese de que la alimentación esté apagada antes de limpiar. Limpie el lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Área del sensor: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Lamp no se enciende. |
|
|
| Lamp no se apaga. |
|
|
| Sensor sensitivity seems low. |
|
|
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | Philips |
| Número de modelo | 929002058731 |
| Tipo de luz | CONDUJO |
| Quétage | 8 vatios |
| Equivalente incandescente | 60 vatios |
| Lamp Base | E27 |
| Color claro | Blanco cálido |
| Temperatura de color | 2700 Kelvin |
| Flujo luminoso | 806 lúmenes |
| Volumentage | 100 240-Volt |
| Frecuencia | 50 hercios |
| Características especiales | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Uso interior/exterior | Interior |
| Esperanza de vida | 15,000 horas |
| Dimensiones (Al x An) | 12.2 cm x 6.25 cm |
| Material | Plástico |
Garantía y soporte
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Soporte en línea: Visita www.philips.com/support Para preguntas frecuentes y opciones de contacto.