Producto terminadoview
The NiteRider Lumina Micro 900 is a compact and lightweight front bike light designed for various cycling conditions, including mountain, road, commuting, and urban environments. It features a powerful 900-lumen output, USB rechargeability, and water resistance, ensuring visibility and safety during your rides.
Key features include a Lock Mode to prevent accidental activation, Intellicharge technology for faster charging, and a durable DuPont fiberglass reinforced nylon housing. The light offers five distinct modes to adapt to different lighting needs and optimize battery life.
Image: NiteRider Lumina Micro 900 compact front bike light.
Qué incluye
- Cabezal de luz LED
- Batería interna de iones de litio
- Manillar Clamp Mount (fits up to 35mm)
- Cable de carga USB
Configuración e instalación
The NiteRider Lumina Micro 900 comes with a handlebar clamp mount for easy installation. This mount is designed to fit standard and oversized 35mm handlebars.
- Coloque el soporte del manillar: Asegure el manillar clamp mount to your bicycle's handlebar. Ensure it is tightened sufficiently to prevent movement during rides.
- Slide in the Light Head: Slide the LED light head onto the handlebar mount until it clicks securely into place. The quick-release tab allows for convenient removal and installation.
- Ajustar ángulo: Adjust the angle of the light to ensure optimal illumination of your path without blinding oncoming traffic.
Image: NiteRider light securely mounted on bicycle handlebars.
Instrucciones de funcionamiento
Lock Mode Operation
The Lumina Micro 900 features a Lock Mode to prevent accidental power-on during transport or storage, conserving battery life. The light is set to Lock Mode at the factory.
To Unlock the Light:
- Mantenga presionado el botón de encendido durante aproximadamente 7-10 segundos.
- The LED indicator in the switch will change from red to blue, indicating the light is unlocked.
- Press and release the power button again to turn the light on.
To Lock the Light:
- With the light on, press and hold the power button for approximately 7-10 seconds.
- The light will cycle through flash modes and then turn off, with the LED indicator turning red, signifying it is now in Lock Mode.
Video: Instructions on how to unlock the NiteRider Lumina light when the button is lighting up red.
Video: Demonstrates how to unlock Lumina Series lights that are factory-locked for safety.
Modos de luz y tiempos de funcionamiento
The Lumina Micro 900 offers five distinct lighting modes:
- Bajo constante: 200 lumens @ 11:00 hours
- Medio: 450 lumens @ 4:30 hours
- Alto: 900 lumens @ 2:00 hours
- Safety Flash: @ 11:00 hours
- Modo caminar: 30 lumens @ 60:00 hours
Cargando la luz
The Lumina Micro 900 is USB rechargeable. The Intellicharge™ feature reduces charging time, allowing you to spend more time riding.
- Connect the provided USB charging cable to the light and a power source (e.g., computer, USB wall adapter) outputting over 500 mA.
- The typical charge time is 2 hours and 30 minutes.
Image: NiteRider Lumina Micro 900 highlighting USB charging and charge time.
Indicador de nivel de batería
The power button doubles as a battery level indicator:
- Luz azul: Indicates a good battery level remaining.
- Luz roja: Indicates the battery level is below 20% remaining.
Mantenimiento
- Limpieza: Limpie la luz con un paño suave yamp paño para eliminar la suciedad y los residuos. Evite el uso de productos químicos agresivos o materiales abrasivos.
- Almacenamiento: Guarde la luz en un lugar fresco y seco cuando no la use. Si la guardará durante un período prolongado, asegúrese de que la batería esté parcialmente cargada (alrededor del 50 %) y recárguela cada pocos meses para mantenerla en buen estado.
- Resistencia al agua: The light is water resistant (IP64 rated). While it can withstand splashes and light rain, avoid submerging it in water. Ensure the USB port cover is securely closed to maintain water resistance.
Solución de problemas
- La luz no se enciende: If the light does not turn on, it may be in Lock Mode. Refer to the "Lock Mode Operation" section to unlock the device. Ensure the battery is charged.
- Tiempo de ejecución corto: Ensure the light is fully charged before use. Battery performance can decrease over time and in cold temperatures.
- Problemas de carga: Verify the USB cable is properly connected and the power source is functioning. If the light still doesn't charge, try a different USB cable or power source.
Presupuesto
| Característica | Detalle |
|---|---|
| Nombre del modelo | NiteRider Lumina Micro 900 LED Front Bike Headlight |
| Salida de luz máxima | 900 lúmenes |
| Número de configuraciones | 5 (Low Steady, Medium, High, Safety Flash, Walk Mode) |
| Fuente de poder | Battery Powered (Internal Li-Ion) |
| Tiempo de carga | 2:30 hours (with >500 mA power source) |
| Nivel de resistencia al agua | IP64 (resistente al agua) |
| Peso del artículo | 130 grams (light head + handlebar mount) |
| Material | DuPont fiberglass reinforced nylon housing |
| Tipo de montaje | Handlebar Mount (up to 35mm) |
Image: Lumina Micro Series light dimensions.
Garantía y soporte
NiteRider offers comprehensive warranty coverage for the Lumina Micro 900:
- Garantía limitada de por vida: Cubre defectos en componentes mecánicos (carcasas, cubiertas, soportes, sujetadores) y LED.
- Garantía de 2 años: Covers printed circuit boards, switches, and AC adapters.
- Garantía de 1 años: Cubre celdas de batería recargables.
For further support or warranty claims, please visit the official NiteRider websitio o póngase en contacto con su servicio de atención al cliente.
Puede encontrar más información y productos en NiteRider Store.