Ovación Op Pro PreampLifier Manual de usuario

1. Introducción

The Ovation Op Pro Preamplifier is designed to enhance the acoustic and electric sound of your guitar, providing a versatile tone-shaping tool. It features a 3-band equalizer, gain control, and a built-in tuner, making it an essential component for live performances and studio recordings.

Características principales:

• Acoustic guitar preamplifier with 3-band EQ (Low, Mid, High)
• Integrated onboard tuner for accurate tuning
• Adjustable gain control for optimal signal level
• Pre-EQ and Bypass functions for tonal flexibility

2. Producto terminadoview

Familiarize yourself with the controls and indicators on your Op Pro Preampmás duradero:

Figure 1: Ovation Op Pro Preamplifier Front Panel. This image displays the preamplifier unit, highlighting its various controls and indicators including the tuner display, EQ sliders (Low, Mid, High), Gain knob, and buttons for Tune, Bypass, Pre-EQ, Shape, Batt, and Phantom.

Controles e indicadores:

• Botón TUNE: Activates the onboard tuner.
• Pantalla del sintonizador: Digital display showing the note being played and tuning accuracy.
• Botón de anulación: Bypasses the preamplifier's effects, sending a direct signal.
• PRE-EQ Button: Engages or disengages the pre-equalization setting.
• SHAPE Button: Activates a pre-set tonal contour.
• Indicador BATT: Lights up to indicate low battery power.
• Indicador PHANTOM: Lights up when phantom power is detected (for compatible systems).
• Perilla de GANANCIA: Adjusts the input sensitivity and overall output volume.
• LOW EQ Slider: Ajusta las frecuencias de graves.
• MID EQ Slider: Ajusta las frecuencias de rango medio.
• HIGH EQ Slider: Ajusta las frecuencias agudas.

3. Configuración

3.1 Instalación

The Ovation Op Pro Preamplifier is designed as a replacement unit for compatible Ovation acoustic-electric guitars. Professional installation is recommended to ensure proper fit and function. Refer to your guitar's specific model documentation for detailed instructions on removing the existing preamp and installing the Op Pro unit.

3.2 Instalación de la batería

El preamplifier requires a 9V battery for operation. To install or replace the battery:

1. Locate the battery compartment on your guitar (typically near the preamp unidad).
2. Abra la tapa del compartimento.
3. Connect a fresh 9V battery to the battery clip, observing correct polarity (+/-).
4. Coloque la batería de forma segura en el compartimiento y cierre la tapa.
5. The BATT indicator will light up when the battery is low and requires replacement.

4. Instrucciones de funcionamiento

4.1 Uso del sintonizador

1. Presione el MELODÍA button to activate the onboard tuner. The tuner display will illuminate.
2. Play a single string on your guitar. The display will show the detected note.
3. Adjust the tuning peg of the string until the display indicates the correct note and the tuning indicator shows it is in tune (e.g., a green light or centered bar).
4. Repita esto para todas las cadenas.
5. Presione el MELODÍA button again to deactivate the tuner.

4.2 Adjusting Tone with EQ

The 3-band EQ allows you to sculpt your guitar's tone:

• BAJO: Adjusts the bass frequencies. Slide up to increase bass, down to decrease.
• MEDIO: Adjusts the midrange frequencies. Slide up for more presence, down for a scooped sound.
• ALTO: Adjusts the treble frequencies. Slide up for more brightness, down for a warmer tone.

4.3 Control de ganancia

El GANAR knob controls the input sensitivity and overall output level of the preamplifier. Turn clockwise to increase gain, counter-clockwise to decrease. Adjust this to match the input level of your amplifier or mixing board and to achieve your desired volume without distortion.

4.4 PRE-EQ and SHAPE Functions

• PRE-EQ: This button engages or disengages a pre-equalization circuit designed to optimize the signal before it reaches the main EQ section. Experiment with this setting to find the best starting point for your tone.
• FORMA: The SHAPE button activates a pre-set tonal contour, often used to provide a quick "scooped" or "boosted" sound suitable for certain playing styles or environments.

4.5 Función BYPASS

Presione el DERIVACIÓN button to send a direct, unprocessed signal from your guitar to the output. This is useful for comparing your processed tone with the raw acoustic sound or for troubleshooting.

5. Mantenimiento

5.1 Reemplazo de batería

Replace the 9V battery promptly when the BATT indicator illuminates to ensure optimal performance and prevent unexpected power loss during use. Refer to section 3.2 for battery installation steps.

5.2 Limpieza

To clean the preamplifier unit, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.

5.3 Almacenamiento

When not in use for extended periods, it is recommended to remove the battery to prevent leakage and potential damage to the unit. Store the guitar with the preamplifier in a cool, dry place, away from extreme temperatures and humidity.

6. Solución de problemas

7. Especificaciones

8. Garantía y soporte

For information regarding warranty coverage, technical support, or service, please refer to the official Ovation webSitio web o contacte con el departamento de atención al cliente. Conserve su recibo de compra como comprobante para cualquier reclamación de garantía.

Ovación oficial Websitio: www.ovationguitars.com