myCharge Portable Charger with Wall Plug – 10050mAh Fast Charging Power Bank

Producto terminadoview

The myCharge HubMax is a versatile and compact portable charger featuring a 10050mAh internal battery. It is equipped with built-in Lightning and USB-C cables, along with an additional USB-A port, allowing for simultaneous charging of multiple devices. The integrated foldable wall plug provides convenient recharging of the power bank directly from an AC outlet, eliminating the need for extra cables or adapters.

Configuración y uso inicial

Before first use, fully charge your myCharge HubMax. To charge the power bank, simply unfold the integrated wall prongs and plug the unit directly into a standard AC wall outlet. The unit will fully recharge in approximately 4.6 hours. The LED indicator lights on the side of the unit will show the current charge level of the power bank. Four solid lights indicate a full charge.

Image: The myCharge HubMax portable charger, showcasing its compact design and integrated wall plug for convenient recharging.

Instrucciones de funcionamiento

Cargando sus dispositivos

The HubMax offers multiple charging options:

• Cables incorporados: Use the integrated Lightning cable for Apple devices (iPhone, iPad) or the USB-C cable for compatible Android phones and other USB-C devices. Simply pull out the desired cable and connect it to your device.
• Puerto USB-A: For devices requiring a standard USB-A connection, plug your own USB-A cable into the dedicated USB-A port on the side of the HubMax.
• Carga simultánea: The HubMax can charge up to three devices concurrently using its built-in cables and USB-A port.

Capacidad de carga rápida

This power bank supports Turbo 18W fast charging, allowing your devices to charge significantly faster than with standard chargers. Expect to charge compatible devices from 0% to 50% in under 30 minutes.

Image: The myCharge HubMax connected to a smartphone, illustrating its Turbo 18W fast charging capability.

Imagen: Un detalle view of the myCharge HubMax highlighting its built-in wall prongs, Lightning and USB-C cables, USB-A port, and anodized aluminum body.

Image: The myCharge HubMax plugged into a wall outlet while simultaneously charging a tablet via USB-C and a smartphone via Lightning cable, demonstrating its dual charging and compatibility.

Mantenimiento

• Keep the device dry. Moisture and liquids may corrode electronic circuits.
• Do not store the device in extremely hot or cold temperatures. High temperatures can shorten the life of electronic devices and damage batteries.
• Limpie el dispositivo con un paño suave y seco. Evite el uso de productos químicos agresivos o materiales abrasivos.
• When not in use for extended periods, store the power bank in a cool, dry place and recharge it periodically to maintain battery health.

Solución de problemas

• El cargador no se enciende: Press the power button firmly. Check the LED indicator lights to ensure the power bank has sufficient charge.
• El dispositivo no se carga: Ensure the built-in cables or your external USB-A cable are securely connected to both the power bank and your device. Verify that your device is compatible with the cable type.
• Carga lenta: Confirm that your device supports fast charging. Ensure the power bank itself is fully charged. Charging multiple devices simultaneously may reduce individual charging speeds.
• Calentamiento excesivo: If the power bank feels excessively hot, disconnect all devices and unplug it from the wall. Allow it to cool down in a well-ventilated area. If overheating persists, discontinue use and contact customer support.

Presupuesto

Garantía y soporte

For information regarding product warranty, please refer to the official myCharge website or the documentation included with your purchase. If you encounter any issues or require technical assistance, please contact myCharge customer support directly.

Visit the myCharge Store: myCharge Amazon Store