Manual del usuario del termómetro registrador de datos Traceable Excursion-Trac

Introducción

The Traceable Excursion-Trac Data Logger Thermometer is designed for precise temperature monitoring and data recording. This device simultaneously displays current, minimum, and maximum temperatures, and features a rolling memory for extensive data storage. It is equipped with a submersible probe and offers customizable alarm functions to ensure critical temperature conditions are maintained and recorded.

Image: The Traceable Excursion-Trac Data Logger Thermometer, showing its digital display and connected bullet probe.

Contenido del paquete

Verifique que todos los artículos estén presentes al desembalar:

• Traceable Excursion-Trac Data Logger Thermometer Unit
• Bullet Probe with 10-ft (3-m) Cable
• Unidad flash USB
• Flip-Open Stand
• Hook-and-Loop Strips
• Magnetic Strips
• Wall-Mount Receptacle
• Baterías (preinstaladas o separadas)
• NIST-Traceable Calibration Certificate with Data

Configuración

1. Instalación de la batería: If batteries are not pre-installed, open the battery compartment on the back of the unit and insert the specified batteries, observing correct polarity.
2. Conexión de la sonda: Connect the bullet probe cable to the designated port on the thermometer unit. Ensure a secure connection.
3. Colocación inicial: Position the thermometer unit using the flip-open stand for a benchtop, or utilize the hook-and-loop strips, magnetic strips, or wall-mount receptacle for secure placement. The 10-ft (3-m) submersible micro-cable allows the probe to be placed in the desired monitoring location, even permitting doors to close over the cable.
4. Encendido: Press the power button (if available) or ensure the unit is active. The display should illuminate, showing current temperature readings.

Instrucciones de funcionamiento

Operación básica

• Mostrar: The LCD simultaneously shows the current temperature, minimum recorded temperature (MIN), and maximum recorded temperature (MAX).
• Unidades: Use the 'UNITS' button to toggle between Celsius (°C) and Fahrenheit (°F) temperature scales.
• Memoria View: The 'MEM VIEW' function allows review of stored data.

Registro de datos

• The device features rolling memory, capable of retaining the most recent 525,600 temperature observations.
• Transferencia de datos: To transfer recorded data, insert the provided USB flash drive into the unit's USB port. The data will be saved as a CSV file, accessible on any computer without special software.
• Memoria clara: After downloading data and alarm events, the memory can be cleared to continue recording new data. Refer to the device's specific buttons (e.g., 'CLEAR') for this function.

Funciones de alarma

• The thermometer allows setting limits for and storing up to 10 unique alarm events.
• Configuración de alarmas: Use the 'ALARM' and 'SELECT/ADVANCE' buttons to set desired high and low temperature alarm thresholds.
• Smart-Alarm Function: The Smart-Alarm provides both visual and audible alerts. It continues to alert even if conditions return to the normal temperature range, ensuring that any excursion is noted.
• Alarma de silencio: An 'ALARM SILENCE' button is available to temporarily mute audible alerts.

Mantenimiento

• Limpieza: Limpie la unidad con adamp cloth. Do not submerge the main unit in water. The bullet probe is submersible and can be cleaned as needed.
• Reemplazo de batería: When the battery indicator appears or the unit fails to power on, replace the batteries. Refer to the battery compartment for the correct battery type.
• Cuidado de la sonda: Handle the probe and its cable with care to prevent damage. Avoid sharp bends or excessive pulling on the cable.

Solución de problemas

Presupuesto

Soporte y garantía

For technical assistance, product inquiries, or warranty information, please contact the manufacturer, Cole-Parmer, or visit their official website. Specific warranty details were not provided in the product data.

Fabricante: COLE-PARMER

Marca: TRAZABLE

Soporte en línea: www.coleparmer.com