PROTEAR 3.5mm Male AUX Audio Jack to USB 2.0 Charging Cable Instruction Manual

Introducción

This manual provides essential instructions for the proper use and maintenance of your PROTEAR 3.5mm Male AUX Audio Jack to USB 2.0 Charging Cable. This cable is specifically designed as a replacement charging cable for PROTEAR rechargeable headphones. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Información de seguridad

Observe the following safety precautions to prevent damage to the cable or connected devices, and to ensure user safety:

• No exponga el cable a temperaturas extremas, luz solar directa o humedad.
• Evite doblar o torcer excesivamente el cable, ya que esto puede dañar los cables internos.
• Mantener fuera del alcance de los niños y las mascotas.
• Use only with compatible PROTEAR rechargeable headphones as specified.
• Disconnect the cable by pulling the plug, not the cord.

Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

• 1 x PROTEAR 3.5mm Male AUX Audio Jack to USB 2.0 Charging Cable (Model: 80006)

Configuración

The PROTEAR charging cable is designed for straightforward connection. Follow these steps to set up your cable for charging:

1. Identifique los conectores: The cable has two distinct ends: a 3.5mm male AUX audio jack and a USB 2.0 Type-A male connector.
   

   Image: The PROTEAR 3.5mm Male AUX to USB 2.0 Charging Cable, showing both the 3.5mm jack and the USB-A connector.

2. Conectar a los auriculares: Insert the 3.5mm male AUX audio jack end of the cable into the corresponding charging port on your PROTEAR rechargeable headphones. This port is typically a small circular opening.
   

   Imagen: Un primer plano view of the 3.5mm male AUX jack, which connects to the headphone's charging port.

3. Conéctese a la fuente de alimentación: Insert the USB 2.0 Type-A male connector into a compatible USB power source. This can be a USB wall adapter, a computer's USB port, or a power bank. Ensure the power source provides standard USB 5V output.
   

   Imagen: Un primer plano view of the USB 2.0 Type-A male connector, ready to be plugged into a power source.

Operante

Once connected, the cable will facilitate charging of your PROTEAR rechargeable headphones. The charging process is typically indicated by an LED light on your headphones (refer to your headphone's manual for specific indicators).

• Asegúrese de que ambos extremos del cable estén conectados de forma segura antes de iniciar la carga.
• Charging times may vary depending on the headphone model and the power source used.
• Disconnect the cable once the headphones are fully charged to preserve battery life.

Mantenimiento

El cuidado adecuado prolongará la vida útil de su cable de carga:

• Limpieza: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or solvents.
• Almacenamiento: Guarde el cable en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas. Evite enrollarlo demasiado para evitar daños.
• Inspección: Inspeccione periódicamente el cable para detectar signos de desgaste, deshilachado o daños en los conectores. Suspenda su uso si observa daños.

Solución de problemas

Si tiene problemas con el cable de carga, consulte los siguientes problemas y soluciones comunes:

Presupuesto

• Número de modelo: 80006
• Longitud del cable: Aproximadamente 43 pulgadas (108 cm)
• DC Head: 3.5 mm
• Tipo de conector: USB 2.0 Type-A Male to 3.5mm Male AUX Audio Jack
• Compatibilidad: Specifically designed for PROTEAR Rechargeable Headphones
• Fabricante: PROTEGER

Garantía y soporte

For warranty information or technical support, please refer to the documentation provided with your PROTEAR rechargeable headphones or visit the official PROTEAR webSitio. Conserve su recibo de compra como comprobante de compra.

For further assistance, you may contact PROTEAR customer service through their official channels.