Manual de usuario de los auriculares para juegos ONIKUMA K1B

Introducción

Thank you for choosing the ONIKUMA K1B Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure optimal performance and longevity. Please read this manual carefully before use.

Contenido del paquete

1 x ONIKUMA K1B Gaming Headset
1 x Conversion Line (Y-splitter cable)
1 x Manual de usuario

Producto terminadoview

The ONIKUMA K1B Gaming Headset is designed for an immersive gaming experience, featuring comfortable over-ear cups, an omnidirectional microphone, and LED lighting. It is compatible with various gaming consoles, including PS4 and Xbox One.

ONIKUMA K1B Gaming Headset, front-side view con micrófono extendido

Figura 1: Lado delantero view of the ONIKUMA K1B Gaming Headset with its omnidirectional microphone extended. The headset features a camouflage design and comfortable ear cushions.

ONIKUMA K1B Gaming Headset, angled view con el micrófono retraído

Figura 2: Angular view of the ONIKUMA K1B Gaming Headset, showing the camouflage pattern and the microphone in a retracted position. The headset is designed for over-ear comfort.

Instrucciones de instalación

Conectar al dispositivo:
- For devices with a single 3.5mm audio jack (e.g., most laptops, newer controllers): Plug the 3.5mm jack directly into your device's audio port.
- For devices with separate audio and microphone jacks (e.g., older PCs): Use the included conversion line (Y-splitter cable) to connect the headset's 3.5mm jack to the separate audio and microphone ports on your device.
- For LED lighting: Plug the USB connector into an available USB port on your device (PC, console, or USB power adapter) to power the headset's LED lights. The USB connection is for lighting only, not for audio.
Ajuste del ajuste de los auriculares: Extend or retract the headband to comfortably fit your head. Ensure the ear cups fully cover your ears for optimal sound isolation and comfort.
Posición del micrófono: Adjust the flexible omnidirectional microphone to a suitable distance from your mouth for clear voice capture.
Configurar ajustes de audio: After connecting, navigate to your device's audio settings to ensure the ONIKUMA K1B headset is selected as the default output and input device. Adjust volume levels as needed.

Instrucciones de funcionamiento

Control de volumen: The headset features an in-line volume control wheel on the cable. Rotate the wheel to increase or decrease the audio volume.
Silencio del micrófono: An in-line switch allows you to quickly mute or unmute the microphone. Ensure the microphone is unmuted when you wish to communicate.
Iluminación LED: The LED lights activate automatically when the USB cable is connected to a powered USB port. There is no separate switch for the LED lights.
Control de ruido: The headset incorporates noise control features. For optimal performance, ensure the ear cups are properly seated over your ears.

Mantenimiento

Limpieza: Use a soft, dry cloth to clean the headset. For ear cushions, gently wipe with a slightly damp cloth if necessary, then dry thoroughly. Do not use harsh chemicals or abrasive cleaners.
Almacenamiento: Guarde los auriculares en un lugar fresco y seco, alejados de la luz solar directa y de temperaturas extremas. Evite colocar objetos pesados sobre ellos.
Cuidado de cables: Evite las curvas cerradas o tirar excesivamente de los cables. Al desconectarlos, sujete siempre el enchufe, no el cable.
Resistencia al agua: While the product description mentions "Waterproof", it is generally recommended to avoid exposing electronic devices to liquids. Protect the headset from spills and moisture to prevent damage.

Solución de problemas

Problema	Posible solución
No hay sonido en los auriculares	Asegúrese de que el conector de 3.5 mm esté completamente insertado en el dispositivo. Verifique el control de volumen en línea y aumente el volumen. Verifique la configuración de audio del dispositivo para asegurarse de que el auricular esté seleccionado como dispositivo de salida. Pruebe los auriculares en otro dispositivo para descartar problemas específicos del dispositivo.
El micrófono no funciona	Ensure the microphone mute switch on the cable is in the "unmute" position. Verify device audio settings to ensure the headset microphone is selected as the input device. If using the Y-splitter, ensure it is correctly connected to both mic and audio ports. Check for any software-based microphone privacy settings on your device.
Las luces LED no funcionan	Asegúrese de que el cable USB esté conectado de forma segura a un puerto USB con alimentación. Pruebe con un puerto USB o fuente de alimentación diferente.

Presupuesto

Característica	Detalle
Modelo	K1B
Diámetro del altavoz	50 mm
Impedancia	20Ω±15%
Sensibilidad	117dB ± 3dB
Rango de frecuencia	20-20000 Hz
Mic Dimension	6.0 mm x 2.7 mm
Sensibilidad del micrófono	-36 dB ± 1 dB
Impedancia del micrófono	2.2kΩ
Directividad	Omni-direccional
Volumen de trabajo LEDtage	CC5V ± 5%
Corriente de trabajo	Debajo de 100mA
Interfaz de auriculares	USB (for LED) + 3.5mm Stereo Audio and Mic Plug
Longitud del cable	2.2 m
Material	Plástico
Dispositivos compatibles	Gaming Consoles (PS4, Xbox One), PC, etc.
Control de ruido	Cancelación activa de ruido

Garantía y soporte

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please reach out to the product seller or manufacturer's customer service.

Extended warranty options may be available from third-party providers. Please check with your retailer for details on such offerings.