PDP Victrix Pro FS Arcade Fight Stick User Manual

1. Introducción

The Victrix Pro FS Arcade Fight Stick is a high-performance gaming controller engineered for competitive fighting game players. Designed for precision and durability, it features authentic Sanwa Denshi components and a robust aircraft-grade aluminum construction. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Pro FS Fight Stick. It is compatible with PlayStation 4 and PlayStation 5 consoles.

2. Producto terminadoview

The Victrix Pro FS is crafted with a focus on ergonomic comfort and rapid response. Its design integrates a detachable joystick shaft for portability and easy access to internal components for customization.

Figura 2.1: De arriba hacia abajo view of the Victrix Pro FS Arcade Fight Stick, showcasing the joystick, action buttons, and control panel.

Figura 2.2: Parte superior en ángulo view of the Victrix Pro FS, highlighting the sleek aluminum chassis and button layout.

Figure 2.3: The Victrix Pro FS with its braided USB-C cable connected, showing the cable management features.

Figura 2.4: Abajo view of the Victrix Pro FS, revealing the large access panel for internal components and non-slip pads.

Figura 2.5: Interna view of the Victrix Pro FS with the bottom access panel open, showing the wiring and Sanwa joystick.

Figura 2.6: Ángulo interno view, providing a closer look at the Sanwa Denshi components and organized wiring.

3. Configuración

3.1 Connecting to Your Console

1. Ensure your PlayStation 4 or PlayStation 5 console is powered off or in rest mode.
2. Connect the supplied USB-C cable to the port on the Victrix Pro FS Fight Stick.
3. Connect the other end of the USB-C cable to an available USB port on your console.
4. Power on your console. The fight stick should be automatically recognized.

3.2 Detachable Joystick Shaft (The Link 2)

The Victrix Pro FS features The Link 2 detachable joystick shaft for convenient transport and storage.

1. Adjuntar: Align the base of the joystick shaft with the opening on the fight stick. Push down firmly and twist clockwise until it locks securely into place.
2. Despegar: Twist the joystick shaft counter-clockwise and pull upwards to remove. Store the shaft in the designated compartment within the fight stick's internal access panel to prevent damage during travel.

Conector de auriculares 3.3

A standard 3.5mm headphone jack is integrated into the fight stick, allowing you to connect your gaming headset directly for audio and microphone functionality without needing an additional adapter.

4. Instrucciones de funcionamiento

4.1 Jugabilidad básica

The Victrix Pro FS utilizes a standard arcade button layout and joystick for precise control in fighting games. Familiarize yourself with the button assignments for your specific game title.

4.2 Funcionalidad del panel táctil

The integrated touchpad button on the Victrix Pro FS is designed for specific functions within certain fighting games, primarily for training mode or character position reset purposes. Nota importante: This function does not replicate the full functionality of the DUALSHOCK 4 touchpad. Supported titles include:

• Blazblue Cross Tag Batalla
• Dragonball Fighter Z
• Guilty Gear Xrd
• Injustice 2
• King of Fighters 14
• Marvel vs. Capcom Infinite
• Mortal Kombat XL
• Tekken 7
• Soul Calibur 6
• Street Fighter 5
• Street Fighter 30th Anniversary

4.3 Customizable LED Lighting

The Victrix Pro FS features customizable LED lighting. Refer to the official Victrix software or on-device controls (if available) for instructions on adjusting colors and effects to personalize your fight stick.

4.4 Programmable "Pro" Button

The fight stick includes a programmable "Pro" button. This button can be mapped to perform specific actions or macros, enhancing your gameplay. Consult the official Victrix software or product documentation for detailed instructions on button remapping.

5. Personalización y mantenimiento

5.1 Accessing Internal Components

The Victrix Pro FS is designed for easy customization. A large bottom door provides access to the internal wiring and components, allowing for updates, swaps, and modifications of buttons and joysticks. Exercise caution when opening the panel and handling internal parts.

5.2 Limpieza

To maintain the appearance and functionality of your fight stick:

• Limpie el exterior con un paño suave y seco.
• Para marcas difíciles, utilice un paño ligeramente húmedo.amp Paño con jabón suave y séquelo inmediatamente.
• Evite utilizar productos químicos agresivos o limpiadores abrasivos, ya que pueden dañar el acabado.
• Keep liquids away from the buttons and joystick mechanism.

5.3 Reemplazo de componentes

The Victrix Pro FS uses authentic Sanwa Denshi parts, which are widely available for replacement. If a button or joystick component needs to be replaced, open the bottom access panel and carefully disconnect the existing component before installing the new one. Refer to online guides or professional assistance if you are unsure about the process.

6. Solución de problemas

If you encounter issues with your Victrix Pro FS Fight Stick, try the following steps:

• Sin poder/reconocimiento: Ensure the USB-C cable is securely connected to both the fight stick and the console. Try a different USB port on your console.
• Unresponsive Buttons/Joystick: Check for any physical obstructions. If the issue persists, open the bottom access panel (Section 5.1) and verify that all internal connections to the buttons and joystick are secure.
• Intermittent Disconnects: Ensure the USB-C cable is not loose or damaged. Avoid sudden movements of the fight stick that could strain the connection. Try a different USB-C cable if available.
• El panel táctil no funciona: Confirm that the game you are playing supports the limited touchpad functionality of the Victrix Pro FS (Section 4.2).
• Problemas de software: Ensure your console's system software is up to date. Check the official Victrix website for any firmware updates for the fight stick.

Si estos pasos no resuelven el problema, comuníquese con el servicio de atención al cliente.

7. Especificaciones

8. Vídeo oficial del producto

9. Garantía y soporte

9.1 Información de garantía

The Victrix Pro FS Arcade Fight Stick comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official PDP websitio.

9.2 Atención al cliente

For technical assistance, troubleshooting, or any product-related inquiries, please contact PDP Customer Support. You can find contact information and additional resources on the official PDP websitio: Visit the PDP Store