Manual del usuario del amplificador de señal para teléfono celular ANNTLENT

1. Producto terminadoview

The ANNTLENT N30-PY Cell Phone Signal Booster is designed to enhance 5G and 4G LTE signals for all major carriers operating on Band 5, 12, 13, and 17. This system provides improved cellular coverage up to 4,500 square feet, ensuring stronger signals, faster data speeds, fewer dropped calls, and better voice quality within your home or office environment.

Key features include automatic gain control (ALC) for stable signal performance, low energy consumption, LED indicators for operational status, and an accompanying mobile application to assist with installation and signal optimization.

2. Contenido del paquete

Verifique que todos los componentes enumerados a continuación estén incluidos en su paquete:

• N30 Booster
• Outside Directional Antenna (Yagi Antenna)
• Inside Panel Antenna
• Cable de entrada de ventana
• 3 Longer Cables (2 x 16', 1 x 33')
• Fuente de alimentación
• Cinta impermeable
• Cinta para gestión de cables

Figura 2.1: Contenido del paquete

3. Configuración e instalación

Proper installation is crucial for optimal performance. Please follow these steps carefully. The ANNTLENT APP is highly recommended for guiding you through the installation process, especially for finding the optimal direction for the outdoor antenna.

3.1 Lista de verificación previa a la instalación

• Check Your Band: Before purchase and installation, ensure your phone's frequency band is compatible (Band 5, 12, 13, or 17).
• Intensidad de la señal exterior: The booster requires at least 1 bar of existing signal outside your house to function effectively.
• Separación de antena: Maintain a minimum vertical separation of 25 feet or a horizontal separation of 50 feet between the outdoor and indoor antennas. Ensure they do not face each other.

3.2 pasos de instalación

1. Instalar antena exterior: Mount the directional yagi antenna in an elevated location outside your home (e.g., roof, pole) where the signal is strongest. Use the ANNTLENT APP to find the direction of the closest cell tower for precise aiming.
2. Cables de ruta: Connect the outdoor antenna to the booster unit using the provided cables. Utilize the flat window entry cable to route the cable from outside to inside without drilling, if preferred. Use waterproof tape for outdoor connections to protect against elements.
3. Instalar antena interior: Place the indoor panel antenna in a central location within the area where you need improved signal. Ensure it is sufficiently separated from the outdoor antenna.
4. Connect Booster Unit: Connect the indoor antenna to the booster unit.
5. Encendido: Connect the power supply to the booster unit and plug it into a power outlet. The booster will power on and begin operation.

Figure 3.1: System Components and Setup

Figure 3.2: Installation Convenience Features

4. Instrucciones de funcionamiento

Once installed and powered on, the ANNTLENT N30-PY booster operates automatically to optimize your cellular signal.

4.1 Automatic Gain Control (ALC)

The booster features built-in ALC (Automatic Level Control) technology. This system detects the existing signal strength and automatically adjusts its performance to prevent overloads and ensure stable operation. This intelligent adjustment helps maintain consistent signal quality without manual intervention.

Figure 4.1: Internal Smart Functions

4.2 Indicadores LED

The booster unit is equipped with smart signal lights that indicate its operational status and signal strength. Refer to the specific LED patterns in the full user guide for detailed interpretations. These lights help you quickly determine if the booster is functioning correctly.

Figure 4.2: Signal Status Indicators

4.3 Low Power Sleep Mode

To conserve energy, the booster automatically switches to a low power sleep mode when no active cellular usage is detected. This feature ensures energy efficiency and extends the lifespan of the device.

Figure 4.3: Energy Saving Sleep Mode

Figure 4.4: Automatic Standby for Energy Saving

4.4 Manual Gain Adjustment

In environments with very strong outdoor signals, you may manually adjust the gain settings on the booster unit to optimize performance and prevent signal saturation. Refer to the detailed instructions in the full user guide for proper adjustment procedures.

Figure 4.5: Manual Gain Adjustment

5. Mantenimiento

The ANNTLENT N30-PY signal booster is designed for minimal maintenance. To ensure longevity and consistent performance:

• Mantenga las conexiones seguras: Periodically check all cable connections, especially outdoor ones, to ensure they are tight and protected with waterproof tape.
• Componentes limpios: Gently wipe the booster unit and antennas with a dry, soft cloth to remove dust. Do not use liquid cleaners.
• Evite Obstrucciones: Ensure that the indoor and outdoor antennas remain free from physical obstructions that could interfere with signal transmission.

6. Solución de problemas

If you experience issues with your signal booster, consider the following common solutions:

6.1 No Signal Improvement / Weak Signal

• Outdoor Signal: Confirm you have at least 1 bar of usable signal outside your home. The booster amplifies existing signal; it does not create it.
• Separación de antena: Ensure sufficient isolation between the outdoor and indoor antennas (minimum 25 ft vertical or 50 ft horizontal). Insufficient separation can lead to oscillation and reduced performance.
• Orientación de la antena: Use the ANNTLENT APP to precisely aim the outdoor antenna towards the nearest cell tower. Even small adjustments can significantly impact performance.
• Conexiones de cable: Revise todas las conexiones de cables para asegurarse de que estén seguras y correctamente apretadas.
• Compatibilidad de banda: Verify that your carrier's frequency band is supported by the N30-PY booster (Band 5, 12, 13, 17).

Figure 6.1: Signal Requirement for Booster Operation

6.2 Using the ANNTLENT APP for Troubleshooting

The ANNTLENT APP provides valuable tools for diagnosing and resolving issues:

• Videos de instalación: Access step-by-step video guides.
• Signal Strength & Band Display: View real-time signal strength and identify the active frequency band.
• Cell Tower Locator: Helps pinpoint the direction of the nearest cell tower for optimal antenna aiming.
• Atención al cliente: Direct access to support resources.

Figure 6.2: ANNTLENT Signal Advisor APP

Figure 6.3: APP Features for Setup and Troubleshooting

6.3 Checking Band Information on Your Phone

To confirm your phone's active band, use the following methods:

• Para dispositivos iOS:
  1. Marcar *3001#12345#*
  2. Tap "Serving Cell Info"
  3. Check "Band Info"
• Para dispositivos Android:
  1. Download "Network Cell Info Lite" from the app store.
  2. Choose "GAUGE"
  3. Check "Band"

Figure 6.4: Checking Band Info on iOS

Figure 6.5: Checking Band Info on Android

7. Especificaciones

Figure 7.1: FCC Approval Information

8. Garantía y soporte

ANNTLENT stands behind the quality of its products. The N30-PY Cell Phone Signal Booster comes with the following guarantees:

• Garantía de devolución de dinero de 30 días: Si no está satisfecho con su compra, puede devolverla dentro de los 30 días para obtener un reembolso completo.
• Reemplazo de 3 meses: In case of defects or malfunctions within the first 3 months, a replacement unit will be provided.
• Up to 3-Year Manufacturer Repair: The product is covered by a manufacturer repair warranty for up to 3 years from the date of purchase.

For technical assistance, troubleshooting, or warranty claims, please contact ANNTLENT customer support. You can also utilize the ANNTLENT APP for direct access to support resources.