Livarno LED Cabinet Light Set Instruction Manual

1. Introducción

Thank you for choosing the Livarno LED Cabinet Light Set. This set includes three energy-saving, battery-powered LED lights designed for easy installation in cabinets, on shelves, or in other equipment. Each light features 4 LEDs and is operated by a simple push switch. Please read this manual carefully before installation and use to ensure proper function and safety.

2. Instrucciones de seguridad

• Conserve este manual para futuras consultas.
• Do not expose the lights to extreme temperatures, direct sunlight, or high humidity.
• Do not attempt to open or modify the lights, as this will void the warranty and may cause damage.
• Asegúrese de que las baterías estén insertadas con la polaridad correcta.
• Replace all batteries in a set at the same time. Do not mix old and new batteries or different types of batteries.
• Deseche las baterías usadas de acuerdo con las normas locales.
• Este producto está destinado únicamente para uso en interiores.

3. Contenido del paquete

Verifique que todos los artículos estén presentes y en buen estado:

• 3 x Livarno LED Cabinet Lights
• 3 x AAA LR03 Batteries (pre-installed or included separately)
• Self-adhesive pads (pre-applied or included separately)

Image: The product packaging showing three individual LED cabinet lights.

4. Configuración e instalación

4.1. Inserción de la batería

1. Gently twist the back cover of each LED light counter-clockwise to open the battery compartment.
2. Insert 3 x AAA LR03 batteries into each light, ensuring correct polarity (+/-).
3. Replace the back cover by twisting it clockwise until securely closed.

4.2. Montaje de las luces

The lights feature a 3M self-adhesive surface on the back for easy attachment.

1. Clean the desired mounting surface thoroughly to ensure it is free of dust, grease, and moisture.
2. Peel off the protective film from the self-adhesive pad on the back of the light.
3. Press the light firmly onto the cleaned surface for several seconds to ensure a secure bond.
4. Repeat for all three lights in your desired locations, such as under cabinets, inside closets, or on shelves.

Image: A Livarno LED cabinet light installed, demonstrating its compact design.

5. Operación

The Livarno LED Cabinet Lights are designed for simple operation:

• Encender: Press the center surface of the light cover. The 4 LEDs will illuminate.
• Apagar: Press the center surface of the light cover again. The LEDs will turn off.

Imagen: Un primer plano view of the LED cabinet light, highlighting the central push switch for activation.

6. Mantenimiento

6.1. Limpieza

Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.

6.2. Reemplazo de la batería

When the light output diminishes, it is time to replace the batteries. Follow the steps in Section 4.1 to replace the 3 x AAA LR03 batteries in each unit.

7. Solución de problemas

• La luz no enciende:
  • Compruebe si las pilas están insertadas correctamente con la polaridad correcta.
  • Reemplace las baterías viejas o agotadas por otras nuevas.
  • Asegúrese de que la tapa del compartimiento de la batería esté bien cerrada.
• La luz es tenue:
  • Batteries may be low. Replace all batteries in the unit.
• Light falls off surface:
  • Ensure the mounting surface was clean and dry before installation.
  • Re-attach using a new, strong adhesive pad if necessary.

8. Especificaciones

9. Garantía y soporte

Este producto viene con un 3 año de garantíaConserve su comprobante de compra para reclamaciones de garantía.

For technical support or warranty inquiries, please refer to the contact information provided on the product packaging or your retailer's websitio.

Image: Product packaging detail, indicating a 3-year warranty and the UPC (4047494019923).