O.N LED Anti-Blackout Emergency Light

1. Producto terminadoview

The O.N LED Anti-Blackout Emergency Light is a 2W, 160 lumen recessed lamp designed for indoor use. It provides 6500K cool white illumination and features an integrated lithium-ion battery for emergency operation during power outages. Este lamp is suitable for installation in a standard 503 support box and connects directly to a 230V AC power supply.

Figura 1: Frente view of the O.N LED Anti-Blackout Emergency Light.

2. Información de seguridad

Lea atentamente todas las instrucciones de seguridad antes de instalar y usar el producto. El incumplimiento de estas instrucciones podría provocar descargas eléctricas, incendios u otros peligros.

• Seguridad eléctrica: Installation must be performed by a qualified electrician in accordance with local electrical codes. Ensure the main power supply is disconnected before any installation or maintenance.
• Volumentage: This device operates on 230V AC. Verify your power supply matches this requirement.
• Uso exclusivo en interiores: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in wet or damp Ubicaciones.
• Batería: Contains a non-replaceable lithium-ion battery. Do not attempt to open or replace the battery. Dispose of the product responsibly at the end of its life.
• Calor: No cubra el lamp or install it near heat sources. Ensure adequate ventilation.
• Daño: No utilice la lamp Si está dañado, contacte con atención al cliente para obtener ayuda.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• 1 x O.N LED Anti-Blackout Emergency Light
• 1 x Integrated Lithium Battery (3.7V 700mAh)
• Mounting screws (typically included for wall box installation)

Note: The 503 support box for recessed installation is not included and must be purchased separately.

4. Instalación (Configuración)

Este lamp is designed for recessed installation into a standard 503 wall support box. Follow these steps carefully:

1. Desconectar la energía: Before starting, ensure the main power supply to the installation area is completely switched off at the circuit breaker.
2. Preparar caja de pared: Ensure a standard 503 support box is properly installed in the wall.
3. Conexión de cable: Connect the two wires from the lamp to the 230V AC power supply wires within the wall box. It is crucial to respect the Live (L) and Neutral (N) connections as indicated by your electrical wiring. If unsure, consult a qualified electrician.
4. Internal Switch: Locate the small internal switch on the lamp unit. Set this switch to the "ON" position. This activates the anti-blackout function and allows the battery to charge.
5. Montaje: Inserte con cuidado el lamp unit into the 503 support box. Use the provided screws to secure the lamp firmly to the wall box.
6. Restaurar energía: Once installation is complete and secure, restore power at the circuit breaker. The lamp will begin charging its internal battery.

Caution: When removing the transparent cover for accessing the internal switch, exercise care to avoid breaking the fixing tabs.

5. Instrucciones de funcionamiento

The O.N LED Anti-Blackout Emergency Light operates automatically once installed and powered.

• Funcionamiento normal: When main power (230V AC) is present, the lamp's internal battery will charge. A small green LED indicator will illuminate to show that the unit is receiving power and charging.
• Modo de emergencia: En caso de un corte de energíatage (blackout), the lamp will automatically switch to battery power and illuminate, providing emergency lighting.
• Autonomía de la batería: The fully charged battery provides up to 3 hours of continuous light at maximum power during a blackout.
• Tiempo de recarga: Después de un corte de energíatage, the battery requires approximately 6-8 hours to fully recharge once main power is restored.

Note: The small green LED indicator remains lit when power is present. If desired, a small piece of opaque tape can be applied over it to reduce its visibility, without affecting functionality.

6. Mantenimiento

The O.N LED Anti-Blackout Emergency Light requires minimal maintenance.

• Limpieza: Desconecte la alimentación antes de limpiar. Limpie el lampLimpie la superficie con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
• Cuidado de la batería: To ensure optimal battery life, it is recommended to allow the battery to fully discharge and then fully recharge periodically (e.g., every 3-6 months) if power outages are infrequent.
• Inspección: Compruebe periódicamente el lamp para cualquier daño visible o conexiones sueltas.

7. Solución de problemas

If you encounter issues with your O.N LED Anti-Blackout Emergency Light, refer to the following common problems and solutions:

8. Especificaciones

Figure 2: Dimensions of the O.N LED Anti-Blackout Emergency Light.

9. Garantía y soporte

For warranty information and technical support, please contact Electronic Megastore directly through their official channels or the retailer where the product was purchased.

Tenga a mano el número de modelo (8023389640843) y el comprobante de compra cuando se comunique con el soporte técnico.