Sennheiser EK 500 G4-AW+

Manual del usuario del receptor de cámara portátil Sennheiser EK 500 G4-AW+

Introducción

This manual provides detailed instructions for the Sennheiser EK 500 G4-AW+ Portable Camera Receiver. This professional audio device is designed for wireless audio transmission in camera-mounted applications, ensuring high-quality sound capture. It operates within the AW+ frequency range of 470 - 558 MHz. Please read this manual thoroughly before operating the device to ensure proper setup and optimal performance.

Configuración

Follow these steps to set up your Sennheiser EK 500 G4-AW+ Portable Camera Receiver:

  1. Instalación de la batería: Open the battery compartment and insert two AA batteries, ensuring correct polarity. Close the compartment securely.
  2. Fijación de antena: Screw the supplied antenna onto the antenna connector on the receiver.
  3. Montaje de cámara: Attach the receiver to your camera using the provided camera mount. Ensure it is securely fastened.
  4. Conexiones de cable:
    • Connect the 1/8" output cable from the receiver to your camera's audio input.
    • Alternatively, use the XLR balanced output cable for professional audio mixers or recorders, if applicable.
  5. Encendido: Mantenga presionado el botón de encendido hasta que la pantalla se ilumine.
  6. Sincronización de frecuencia: Ensure your transmitter (sold separately) is set to the same frequency as the receiver. Refer to the operating section for frequency scanning and synchronization procedures.
Sennheiser EK 500 G4-AW+ Portable Camera Receiver with antenna and display

The image displays the Sennheiser EK 500 G4-AW+ portable camera receiver, showing its compact design, display screen, control buttons, and detachable antenna. This unit is designed for on-camera mounting.

Operante

Once set up, operate your receiver as follows:

  • Encendido/apagado: Mantenga presionado el botón de encendido para encender o apagar la unidad.
  • Selección de frecuencia: Use the navigation buttons to browse available frequencies or initiate an automatic scan to find clear channels. Synchronize with your transmitter for optimal performance.
  • Control de volumen: Adjust the output volume using the dedicated controls to match your camera's input levels. Monitor audio through headphones if your camera or receiver has a headphone output.
  • Indicadores de seguimiento: Pay attention to the display for signal strength (RF level), audio level, and battery status indicators. A 'LOW BATT' warning will appear when batteries need replacement.
  • Rango: Maintain a clear line of sight between the receiver and transmitter for best range and signal stability. The AW+ frequency range (470 - 558 MHz) is designed for reliable wireless operation.

Mantenimiento

Proper maintenance ensures the longevity and performance of your receiver:

  • Reemplazo de batería: Replace AA batteries promptly when the low battery indicator appears to avoid interruption during use. Always use fresh, high-quality alkaline batteries.
  • Limpieza: Use a soft, dry cloth to clean the exterior of the receiver. Do not use liquid cleaners or solvents, as they may damage the device.
  • Almacenamiento: When not in use for extended periods, remove the batteries to prevent leakage. Store the receiver in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cuidado de la antena: Handle the antenna carefully to prevent bending or breaking. Ensure it is securely attached during operation.

Solución de problemas

If you encounter issues with your receiver, consult the following common problems and solutions:

ProblemaPosible causaSolución
Sin salida de audioIncorrect frequency, low battery, cable issue, transmitter off.Check transmitter power and frequency. Replace receiver batteries. Verify all cable connections.
Interferencia o estáticaNearby electronic devices, conflicting frequencies, excessive distance.Perform a frequency scan to find a clear channel. Move away from sources of interference. Reduce distance between transmitter and receiver.
Advertencia de batería bajaLas baterías están agotadas.Replace both AA batteries with fresh ones.
Rango de operación cortoObstructions, antenna position, environmental factors.Ensure clear line of sight. Adjust antenna position. Avoid dense environments.

Presupuesto

Key technical specifications for the Sennheiser EK 500 G4-AW+ Portable Camera Receiver:

  • Número de modelo: 509546
  • Rango de frecuencia: AW+ (470 - 558 MHz)
  • Peso del artículo: 14.4 onzas (aproximadamente 0.9 libras)
  • Dimensiones del producto: 13.8 x 3.2 x 2.9 inches (packaging) / 2.87"D x 3.19"W x 3.19"H (unit)
  • Baterías: Se requieren 2 pilas AA
  • Tipo de conector: XLR (output)
  • Característica especial: Portátil
  • Modo de salida de audio: Estéreo
  • Color: Negro

Garantía y soporte

For detailed warranty information, technical support, and service inquiries regarding your Sennheiser EK 500 G4-AW+ Portable Camera Receiver, please visit the official Sennheiser webSitio web o contacte con el departamento de atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.

Puede encontrar más información y recursos de apoyo en Official Sennheiser Websitio.

© 2023 Sennheiser. Todos los derechos reservados. Información sujeta a cambios sin previo aviso.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.