Manual de instrucciones de la hielera YETI Tundra 35

Producto terminadoview

The YETI Tundra 35 Cooler is designed for rugged durability and superior ice retention, making it ideal for outdoor adventures. It is portable enough for one person to haul while still offering a generous capacity.

Las características principales incluyen:

• PermaFrost Insulation: Up to 3 inches of insulation and an extra thick FatWall design ensure ice stays ice.
• Construcción rotomoldeada: Armored to the core and virtually indestructible, built to withstand rigorous use.
• T-Rex Lid Latches: Heavy-duty rubber latches provide a secure closure and patented keeper technology.
• Vortex Drain System: A leak-proof drain plug for easy cleaning and draining.
• DoubleHaul Handles: Durable rope handles with textured grips for comfortable carrying.

Configuración y primer uso

Preparación inicial

Before first use, clean the cooler thoroughly with mild soap and water. Rinse well and allow to air dry. This ensures optimal hygiene and performance.

Apertura y cierre de la tapa

To open, simply pull the T-Rex Lid Latches upwards and away from the cooler body. To close, align the lid and push the latches down firmly until they snap into place, creating a tight seal.

Instrucciones de funcionamiento

Maximizar la retención de hielo

For best results, pre-chill your cooler with a bag of ice the night before use. Fill the cooler with a recommended 2:1 ice-to-contents ratio. Minimize opening the lid to maintain internal temperature. The FatWall design with up to 3 inches of PermaFrost Insulation significantly contributes to ice longevity.

Capacidad y carga

The Tundra 35 has an impressive carrying capacity of up to 20 cans with a recommended 2:1 ice-to-contents ratio. It comes standard with one dry goods basket, allowing you to keep items dry and separate from ice.

Mantenimiento y cuidado

Draining the Cooler

The Vortex Drain System allows for easy draining. Simply unscrew the drain plug located at the bottom side of the cooler to release melted ice water. Ensure the plug is securely tightened after draining to prevent leaks.

Limpieza y almacenamiento

Clean the cooler after each use with warm water and mild soap. For stubborn stains or odors, a solution of bleach and water (1:6 ratio) can be used. Rinse thoroughly and allow to air dry completely with the lid open to prevent mildew. Store in a cool, dry place.

Solución de problemas

Problemas comunes

• Mala retención de hielo: Ensure the lid is properly latched and the gasket is clean and free of debris. Pre-chilling the cooler and using sufficient ice are crucial.
• La tapa no sella: Check the T-Rex Lid Latches for proper engagement. Inspect the ColdLock Gasket for any damage or obstructions.
• Fugas: Verify the Vortex Drain Plug is securely tightened. Inspect the gasket for any tears or misalignment.

Presupuesto

Información de seguridad

The YETI Tundra 35 Cooler is certified Bear-Resistant when used with appropriate locks (not included). Always ensure the cooler is properly secured in bear country.

ADVERTENCIA: Risk of Child Entrapment. To prevent accidental entrapment, do not allow children to play inside the cooler. Always secure the lid when not in use.