Producto terminadoview
The CAR PASS Universal Fit Piping Leather Car Seat Cover is designed to protect and enhance the interior of your vehicle. This full set, featuring a stylish black and red design, is compatible with various SUVs, vans, and trucks. It incorporates an airbag-compatible design, inside zipper access, and reserved opening holes for a seamless fit and enhanced safety.
Características principales:
- Luxury PU Leather: High-quality, wrinkle-resistant material with a 5mm super soft composite sponge.
- Conjunto completo: Includes 2 front seat covers, 2 backrest covers, 1 rear backrest cover, 1 rear bottom bench cover, 5 separate headrest covers, and installation clips.
- Airbag Compatible: Features an exclusive patented design for airbag deployment in emergencies, ensuring safety.
- Fácil instalación y limpieza: Equipped with two-line zippers to accommodate 40/60, 40/20/40, and 50/50 split benches, allowing for easy installation and access to cup holders. 100% washable and breathable.
Guía de compatibilidad
These universal fit seat covers are designed to accommodate a wide range of vehicles. Please review the following compatibility details to ensure a proper fit for your specific vehicle.
Nota importante: Before installation, verify that your vehicle's bench headrests are detachable for the rear seat covers. The design is optimized for seats with detachable headrests. If your vehicle has inseparable headrests, armrests, built-in belts, or headrest insertions, the covers may not fit perfectly or may require modifications.
Configuración e instalación
Contenido del paquete:
- 2 Front Seat Covers
- 2 Front Backrest Covers
- 1 Rear Backrest Cover
- 1 Rear Bottom Bench Cover
- 5 Separate Headrest Covers
- 1 Bag of Installation Clips
Antes de la instalación:
- Ensure all items are present as per the package contents list.
- Clean your vehicle's seats thoroughly to remove any dirt or debris.
- Confirm that your rear bench headrests are detachable.
Instalación paso a paso:
- Front Seat Covers:
Slide each front seat cover over the top of the seat. Ensure the cover aligns with the seat's contours. Smooth out any wrinkles. Secure the cover using the elastic straps and hooks provided, fastening them underneath the seat. - Front Headrest Covers:
Place the separate headrest covers over each front headrest. Pull down firmly to ensure a snug fit. - Rear Bench Seat Cover (Bottom):
Position the rear bottom bench cover over the seat cushion. Utilize the included clips and straps to secure it firmly underneath the bench. For split benches, use the two-line zippers to adjust the fit and allow for folding down sections or accessing cup holders. - Rear Backrest Cover:
Drape the rear backrest cover over the backrest. Ensure the headrest holes align. Secure the cover using the elastic loops and hooks, pulling them through the seat gap and fastening them underneath. - Rear Headrest Covers:
Place the remaining separate headrest covers over the rear headrests. - Ajustes finales:
Smooth out any remaining wrinkles and ensure all straps and clips are securely fastened for a tight, custom-like fit.
Operación y uso
Once installed, your CAR PASS seat covers provide a durable and comfortable surface for your vehicle's interior. The design allows for normal use of seat functions, including seatbelt access and, where applicable, split-folding rear seats.
Compatibilidad del airbag:
The seat covers are designed with a special stitching pattern on the sides to ensure full compatibility with side airbags. In the event of an accident, the covers will not impede the deployment of your vehicle's airbags, maintaining your safety.
Mantenimiento y cuidado
To ensure the longevity and appearance of your CAR PASS seat covers, follow these simple care instructions:
- Limpieza: The covers are 100% washable. For light cleaning, wipe with a damp cloth and mild detergent. For deeper cleaning, they can be hand washed or machine washed on a gentle cycle with cold water. Air dry only; do not tumble dry.
- Derrames: The PU leather material is designed to be water-resistant, making spills easy to wipe away before they soak in.
- Transpirabilidad: The breathable design helps prevent heat buildup, contributing to comfort during use.
Solución de problemas
If you encounter any issues with your CAR PASS seat covers, please refer to the following common problems and solutions:
| Problema | Posible causa / solución |
|---|---|
| Covers do not fit snugly or appear loose. | Ensure all straps and clips are pulled tight and secured underneath the seat. Verify your vehicle's seat type matches the universal fit design (e.g., detachable headrests for rear covers). Some seat contours may result in a less 'tight' fit than custom covers. |
| Rear seatbelt holes do not align or are obstructed. | The seat covers feature a two-line zipper design for flexibility. Ensure the zippers are correctly positioned and adjusted to expose the seatbelt receptacles. If the seatbelt is integrated into the seat, the cover may not be fully compatible. |
| Wrinkles or creases in the material. | New covers may have wrinkles from packaging. These typically smooth out with use and exposure to warmth. Gentle stretching and smoothing by hand can also help. |
| Difficulty installing headrest covers. | Ensure the headrest is fully detached from the seat (if applicable) before attempting to install the cover. Pull the cover down firmly and secure any Velcro or elastic closures. |
Especificaciones del producto
| Atributo | Detalle |
|---|---|
| Marca | CAR PASS |
| Número de modelo | zt-0120-5 |
| Material | Luxurious PU Leather with 5mm Composite Sponge |
| Color | Rojo Negro |
| Tipo de ajuste | Ajuste universal |
| Tamaño del paquete | 15.74 x 11.81 x 3.93 pulgadas |
| Peso del artículo | 4.4 LBS (Per Package) |
| Compatible con bolsas de aire | Sí |
| Lavable | Sí |
Garantía y soporte
CAR PASS Excellent Service:
CAR PASS is committed to providing high-quality products and excellent customer service. We stand behind our products and aim for your complete satisfaction.
Contactar con soporte:
If you have any questions, concerns, or require assistance with your CAR PASS seat covers, please do not hesitate to contact our dedicated customer service team. You can typically find contact information on the product packaging or by visiting the official CAR PASS store on Amazon: CAR PASS Store.