Manual de instrucciones de la cafetera Keurig K140

1. Producto terminadoview

The Keurig K140 is a versatile coffee maker designed for both commercial and personal use, compatible with K-Cup pods. It features a simple interface and a removable water reservoir for easy refilling and cleaning.

Figura 1: Frente view of the Keurig K140 Coffee Maker.

Key components include the water reservoir, K-Cup pod holder, control panel with brew size buttons, and a removable drip tray.

2. Configuración

1. Desembalaje del Brewer: Remove all packaging materials and place the brewer on a stable, level surface.
2. Enjuague el depósito de agua: Wash the water reservoir and its lid with warm, soapy water. Rinse thoroughly and dry.
3. Llene el depósito de agua: Fill the reservoir with fresh, filtered water up to the "MAX FILL" line. Place the lid back on the reservoir.
4. Encendido: Plug the brewer into a grounded outlet. The power button will illuminate.
5. Infusión de limpieza inicial:
   • Coloque una taza grande en la bandeja de goteo.
   • Lift and lower the brewer handle without inserting a K-Cup pod.
   • Select the largest brew size.
   • Press the brew button. This will dispense hot water to clean the internal components. Discard the hot water.

La cafetera ya está lista para usarse.

3. Instrucciones de funcionamiento

1. Ensure Water Level: Check that the water reservoir has sufficient water for your desired brew size. Refill if necessary.
2. Insertar cápsula K-Cup: Lift the brewer handle. Place a K-Cup pod into the K-Cup pod holder. Lower the handle completely to close the lid.
3. Lugar Taza: Place a mug or cup on the drip tray.
4. Seleccione el tamaño de la bebida: The control panel will display "READY TO BREW". Select your desired brew size using the illuminated buttons.
5. Comience a preparar: Press the selected brew size button. The brewer will begin the brewing process.
6. Disfrutar: Once brewing is complete, carefully remove your mug. Lift the handle to eject the used K-Cup pod into the discard bin.

Precaución: Do not remove the K-Cup pod holder during brewing. The K-Cup pod contains hot liquid and sharp needles.

4. Mantenimiento

Regular cleaning and maintenance ensure optimal performance and longevity of your Keurig K140 brewer.

4.1. Limpieza de la bandeja de goteo

• La bandeja de goteo se puede extraer fácilmente para limpiarla. Simplemente deslícela hacia afuera de la base de la cafetera.
• Wash the drip tray and its cover with warm, soapy water. Rinse thoroughly and dry.
• Reinsert the drip tray into the brewer.

4.2. Limpieza del depósito de agua

• Remove the water reservoir from the brewer.
• Wash with warm, soapy water. For thorough cleaning, a soft brush can be used.
• Rinse completely and dry before reattaching to the brewer.

4.3. Cleaning the K-Cup Pod Holder

• Lift the brewer handle. Grasp the top of the K-Cup pod holder and pull it upwards to remove it.
• Separate the funnel from the pod holder.
• Wash both parts with warm, soapy water. Pay attention to the exit needle inside the pod holder.
• Reassemble the pod holder and reinsert it into the brewer.

4.4. Descalcificar

Over time, calcium deposits (scale) can build up in your brewer. Descaling is important to maintain performance. Refer to the official Keurig website or your product's specific descaling instructions for the recommended procedure and descaling solution.

5. Solución de problemas

6. Especificaciones

7. Garantía y soporte

For detailed warranty information, please refer to the warranty card included with your product or visit the official Keurig website. For technical support or service inquiries, please contact Keurig customer service directly.

Recursos en línea: www.keurig.com