FiiO E10K-TC Portable USB DAC Headphone AmpLifier Manual de usuario

1. Introducción

The FiiO E10K-TC is a high-resolution portable USB Digital-to-Analog Converter (DAC) and headphone amplifier designed to enhance the audio output quality of your computer or other compatible devices. It features a robust design and versatile connectivity options for an improved listening experience.

Figure 1: FiiO E10K-TC Portable USB DAC Headphone Ampmás vivaz

2. Características

• Audio de alta resolución: Soporta PCM files up to 24-bit/96 kHz resolution.
• Chip DAC: Utilizes the PCM5102 DAC chip for improved audio quality.
• Piso de bajo ruido: Optimized low-pass filter and selectable bass boost circuit designed for minimal noise.
• Amplificación Stage: Features an LMH6643 op amp for transient response and driving power.
• Conectividad: Includes 1/8" headphone jack, 1/8" line output, coaxial digital output, and Micro USB input.
• Controles: Volume control, selectable bass boost, and high/low gain switch.
• Diseño duradero: Brushed aluminum shell and chassis for portable use.

3. Producto terminadoview y controles

Panel frontal

Figure 2: Front Panel of FiiO E10K-TC

• Salida de auriculares (3.5 mm): Conecte sus auriculares aquí.
• Interruptor de refuerzo de graves: Toggle to enable or disable bass enhancement.
• Perilla de volumen: Rotate to adjust the output volume. Pushing the knob in also serves as the power on/off switch.

Panel trasero

Figure 3: Rear Panel of FiiO E10K-TC

• Entrada micro USB: Connect to your computer for data and power.
• Salida digital coaxial: Para conectar a un DAC externo o ampLificador con entrada coaxial.
• Interruptor de ganancia (H/L): Selects high or low gain for different headphone impedances.
• Salida de línea (3.5 mm): Para conectar a un dispositivo externo amplificadores o altavoces activos.

4. Configuración

4.1 Conexión a una computadora

1. Connect the FiiO E10K-TC to your computer using the provided Micro USB cable. The device will draw power directly from the USB port.
2. Your computer should automatically detect the device and install the necessary drivers. For Windows 10, it is recommended to use the default drivers installed by the operating system rather than FiiO's ASIO drivers to avoid potential system instability.
3. Once recognized, select the FiiO E10K-TC as your audio output device in your computer's sound settings.

Figure 4: FiiO E10K-TC connected to a laptop via USB

4.2 Conexión de auriculares o altavoces

1. For headphones, plug your 3.5mm headphone jack into the headphone output port on the front panel.
2. For external speakers or an amplifier, connect a 3.5mm audio cable from the 'Line Out' port on the rear panel to the input of your speakers/amplifier. Alternatively, use the 'Coaxial Out' for digital connection to a compatible device.

Figure 5: FiiO E10K-TC connected to external speakers

5. Instrucciones de funcionamiento

5.1 Encendido y apagado

The FiiO E10K-TC powers on automatically when connected to a powered USB port. To turn it off, disconnect the USB cable. The volume knob also functions as an on/off switch by rotating it fully counter-clockwise until it clicks.

5.2 Ajuste del volumen

Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. Adjust to a comfortable listening level.

5.3 Using Bass Boost

The 'BASS' switch on the front panel allows you to enable or disable bass enhancement. Toggle the switch to 'ON' for increased bass response or 'OFF' for a flatter, more neutral sound profile.

5.4 Selecting Gain

The 'GAIN' switch on the rear panel allows you to select between high (H) and low (L) gain settings. Use the 'L' (low) setting for sensitive headphones or when high volume is not required. Switch to 'H' (high) gain for less sensitive headphones or when more power is needed to drive them effectively.

Figure 6: Front panel with Volume and Bass Boost controls

6. Mantenimiento

• Mantenga el dispositivo limpio con un paño suave y seco. Evite el uso de productos químicos agresivos o materiales abrasivos.
• Proteja el dispositivo de temperaturas extremas, luz solar directa y humedad.
• Evite dejar caer o someter el dispositivo a impactos fuertes.
• Asegúrese de que todos los cables estén conectados de forma segura, pero no los fuerce.

7. Solución de problemas

7.1 No hay salida de sonido

• Check if the FiiO E10K-TC is properly connected to your computer via USB and receiving power.
• Ensure the E10K-TC is selected as the default audio output device in your computer's sound settings.
• Verify that the volume knob on the E10K-TC is turned up and not at its minimum setting.
• Confirm that your headphones or speakers are correctly plugged into the appropriate output port and are functioning correctly.

7.2 Sonido distorsionado

• Reduce the volume on both your computer and the E10K-TC. Distortion can occur if the signal is too strong.
• Check the gain setting. If using sensitive headphones, switch to 'L' (low) gain.
• Asegúrese de la fuente de audio file No está dañado ni es de baja calidad.
• Try using a different USB port or cable to rule out interference.

7.3 Connectivity Issues (Windows 10)

• If experiencing Blue Screen of Death (BSOD) or other instability, especially when disconnecting the device, ensure you are using the default Windows drivers. FiiO's ASIO drivers may cause issues with Windows 10.
• If you previously installed FiiO ASIO drivers, uninstall them and allow Windows to automatically install its native drivers.

8. Especificaciones

9. Garantía y soporte

FiiO products typically come with a limited warranty. For specific warranty terms, duration, and support, please refer to the warranty card included with your product or visit the official FiiO website. You can also contact FiiO customer service for technical assistance or product inquiries.

FiiO oficial Websitio: www.fiio.com