Introducción
This document provides instructions for the installation, care, and specifications of the Casio 10198354 genuine factory replacement watch band. This band is designed to fit various Casio AMW-700 series watch models, including AMW-700, AMW-700B, and AMW-700D. It features a combination of genuine leather and durable nylon (cloth) with a stainless steel buckle, offering a comfortable and secure fit.
Contenido del paquete
- One (1) Casio 10198354 Replacement Watch Band (Gray & Black)
- Note: Spring bars for attachment are typically reused from the original band or purchased separately if needed.
Configuración e instalación
Replacing a watch band requires careful handling to avoid scratching your watch. If you are unsure, it is recommended to seek assistance from a professional watch repair service.
Herramientas necesarias:
- Small spring bar tool or a small, flat-head screwdriver.
- Soft cloth or protective surface.
Pasos de instalación:
- Prepare su espacio de trabajo: Coloque el reloj boca abajo sobre un paño suave y limpio para evitar rayones.
- Retire la banda vieja:
- Locate the spring bars that hold the current watch band to the watch lugs.
- Using a spring bar tool or a small screwdriver, gently push in one end of the spring bar.
- Carefully pull the band away from the watch lug to release the spring bar.
- Repeat for the other side of the band and for the second half of the watch band.
- Keep the old spring bars if they are in good condition, as they will be needed for the new band.
- Instalar la nueva banda:
- Inserte un extremo de una barra de resorte en uno de los orificios del asa del reloj.
- Place the new watch band section between the lugs.
- Using the spring bar tool, compress the other end of the spring bar and guide it into the corresponding hole on the opposite lug.
- Gently tug on the band to ensure it is securely seated and the spring bar is properly engaged in both holes.
- Repeat this process for the second half of the watch band.
Figure 1: The Casio 10198354 replacement watch band, featuring its gray nylon strap, black leather accents, and stainless steel buckle. This image displays the complete band assembly.
Operación y ajuste
Once installed, the watch band can be adjusted to fit your wrist comfortably using the buckle. The band features multiple holes to allow for various wrist sizes.
- Ajuste del ajuste: Insert the buckle pin into the desired hole on the strap to achieve a snug yet comfortable fit. The two keepers (loops) should be used to secure the excess strap.
Figura 2: Una vista detallada view of the stainless steel buckle and the textured nylon strap with visible stitching. This shows the mechanism for adjusting the band's length.
Mantenimiento y cuidado
El cuidado adecuado prolongará la vida útil y la apariencia de la correa de su reloj.
- Limpieza:
- For the nylon (cloth) portion, gently wipe with a damp cloth and mild soap if necessary. Rinse thoroughly with clean water and allow to air dry completely.
- For the leather portions, wipe with a dry or slightly damp cloth. Avoid excessive moisture. Do not use harsh chemicals or abrasive cleaners.
- Evitar la exposición: Minimize prolonged exposure to direct sunlight, extreme temperatures, and harsh chemicals (e.g., perfumes, solvents) as these can degrade the materials.
- El secado: If the band gets wet, allow it to air dry naturally. Do not use artificial heat sources like hair dryers.
Figura 3: Un primer plano view of the leather attachment points of the watch band, showing the stitching and the "FISHING GEAR" embossing on one side, indicating its design for specific Casio models.
Solución de problemas
- La banda no encaja: Ensure you have the correct spring bar size and that the spring bars are properly seated in the lug holes. This band is specifically designed for Casio AMW-700 series watches.
- Malestar o irritación: Ensure the band is not too tight. If irritation persists, clean the band thoroughly or consult a dermatologist.
- Dificultad para instalar las barras de resorte: Ensure the spring bar tool is correctly positioned. Sometimes, a slight angle or gentle pressure is needed to compress the spring bar sufficiently.
Presupuesto
| Característica | Detalle |
|---|---|
| Product Model Number (MPN) | 10198354 |
| Modelos de relojes compatibles | Casio AMW-700, AMW-700-1, AMW-700-1A, AMW-700-1AV, AMW-700B, AMW-700B-1, AMW-700B-1A, AMW-700B-1AV, AMW-700D, AMW-700D-7, AMW-700D-7A, AMW-700D-7AV |
| Material | Genuine Leather / Nylon (Cloth) |
| Material de la hebilla | Acero inoxidable |
| Color | Gris y negro |
| Ancho de la orejeta | 13 mm |
| Tipo de cierre | Hebilla |
| Peso del artículo | Aproximadamente 1 libra (0.45 kg) |
Garantía y soporte
For warranty information or technical support regarding your Casio watch band, please refer to the official Casio webSitio web o contacte directamente con el servicio de atención al cliente de Casio. Conserve su recibo de compra como comprobante.
Puedes visitar la tienda oficial de Casio para más información: Tienda Casio en Amazon