1. Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen CA87316W One-Handle Low Arc Pullout Kitchen Faucet. This faucet features a Glacier finish, a convenient pullout spray head with Power Clean technology, and a single lever for easy water control. Please read these instructions thoroughly before beginning installation or use to ensure proper function and longevity of your product.

Image 1.1: Moen CA87316W One-Handle Low Arc Pullout Kitchen Faucet in Glacier finish. This image shows the complete faucet unit with its single handle and integrated pullout spray head.
2. Información de seguridad
Always adhere to the following safety guidelines during installation and maintenance:
- Cierre el suministro de agua: Before starting any work, always turn off the hot and cold water supply valves under the sink or at the main water shut-off.
- Use equipo de protección: Use appropriate personal protective equipment, such as safety glasses, to prevent injury.
- Asistencia profesional: Si no está seguro acerca de alguna parte del proceso de instalación, se recomienda consultar a un plomero calificado.
- Evite apretar demasiado: Do not over-tighten nuts or connections, as this can damage the faucet or plumbing.
3. Componentes incluidos
Your Moen CA87316W faucet package typically includes the following components. Please verify all parts are present before beginning installation.
- Cuerpo de grifo con manija única
- Pullout spray head
- Conjunto de mangueras
- Mounting hardware (washers, nuts, mounting shank)
- Water supply lines (often integrated or specified separately)
- Deck plate (escutcheon, for 3-hole installations, may be included or sold separately)
- Peso de la manguera
4. Configuración e instalación
4.1. Antes de empezar
- Ensure you have all necessary tools (e.g., adjustable wrench, screwdriver, plumber's putty or silicone sealant).
- Despeje el área debajo del fregadero para facilitar el acceso.
- Turn off the hot and cold water supply valves under the sink or at the main water shut-off.
4.2. Sink Hole Configuration
The Moen CA87316W faucet is designed for installation on sinks with either a single hole or a three-hole configuration. If your sink has three holes, a deck plate (escutcheon) is typically used to cover the two unused outer holes. Refer to the diagram below to identify your sink type.

Image 4.1: Diagram illustrating compatibility with one-hole and three-hole sink configurations. The faucet can be installed directly into a single hole or with a deck plate for three-hole sinks.
4.3. Faucet Installation Steps
- Prepare el fregadero: Clean the sink surface where the faucet will be mounted. If using a deck plate, apply a bead of plumber's putty or silicone sealant around the underside edge of the deck plate to create a watertight seal.
- Monte el grifo: Insert the faucet body through the center hole of the sink (and deck plate, if used). From underneath the sink, secure the faucet using the provided mounting hardware (washer, mounting nut), ensuring it is centered and tightened firmly.
- Conectar las líneas de suministro de agua: Connect the hot and cold water supply lines from the faucet to your home's hot and cold water shut-off valves. The Moen Hydrolock quick connect system simplifies this step; ensure connections are secure and leak-free.
- Conectar la manguera de pulverización: Attach the pullout spray hose to the designated connection point on the faucet's underside. Ensure the connection is secure. Attach the hose weight to the pullout hose at the recommended distance from the spray head to ensure proper retraction.
- Prueba de fugas: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. Operate the faucet to ensure proper water flow and temperature control.
5. Operación
5.1. Control del flujo de agua y la temperatura
The single lever handle controls both water flow and temperature. Lift the handle to increase water flow. Move the handle to the left for hot water and to the right for cold water. The further you move the handle, the greater the temperature change.
5.2. Función de pulverización
The pullout spray head provides flexibility for various kitchen tasks. To use, simply pull the spray head from the spout. Press the button located on the spray head to switch between an aerated stream for general washing and a powerful rinse for heavy-duty cleaning. The integrated Power Clean spray technology delivers 50 percent more spray power compared to standard pullout faucets.

Image 5.1: The Moen CA87316W faucet in a kitchen environment, demonstrating its functional design and Glacier finish.
6. Cuidado y mantenimiento
6.1. Limpieza del acabado
To maintain the pristine Glacier finish of your Moen faucet, clean regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish and void your warranty.
6.2. Mantenimiento general
- Compruebe si hay fugas: Inspeccione periódicamente todas las conexiones debajo del fregadero para detectar fugas. Apriete las conexiones si es necesario.
- Aireador limpio: If water flow decreases or becomes erratic, the aerator at the tip of the spray head may be clogged with debris. Unscrew the aerator, clean any mineral deposits or particles, and reattach it securely.
7. Solución de problemas
Consulte la siguiente tabla para conocer los problemas más comunes y sus soluciones.
| Problema | Posible causa | Solución |
|---|---|---|
| Bajo caudal de agua | Partially closed supply valves, clogged aerator, kinked hose. | Ensure supply valves are fully open. Clean aerator. Check pullout hose for kinks or obstructions. |
| Fugas en la base del grifo | Loose mounting nut, improper sealant during installation. | Tighten mounting nut from underneath the sink. If leaks persist, reapply plumber's putty or silicone sealant. |
| El cabezal rociador no se retrae completamente | Hose weight improperly positioned, obstruction under sink. | Adjust the position of the hose weight on the pullout hose. Clear any obstructions under the sink that may impede hose movement. |
| Problemas de temperatura del agua | Incorrectly connected supply lines, water heater issues. | Verifique que las líneas de suministro de agua caliente y fría estén conectadas correctamente. Revise la configuración de su calentador de agua. |
8. Especificaciones del producto
| Característica | Detalle |
|---|---|
| Marca | Moen |
| Nombre del modelo | CA87316W (Renzo Style) |
| Usos recomendados | Cocina |
| Tipo de montaje | Montaje en cubierta |
| Tipo de acabado | Glacier (White) |
| Material | Metal (Handle Material: Metal) |
| Número de manijas | 1 |
| Recuento de hoyos | 1 (Compatible with 3-hole sinks using deck plate) |
| Características especiales | Power Clean Spray Technology, Flexible Pullout Hose |
| Tipo de instalación | Montado en cubierta |
| Caudal máximo | 1.5 galones por minuto |
| Alcance del pico | 9.5 pulgadas |
| Peso del artículo | 4.4 libras |
| Dimensiones del producto | 10" de profundidad x 8" de ancho x 8" de alto |
| Longitud de la manguera | 68 pulgadas |
| Cumple con ADA | Sí |
9. Información de garantía
This Moen faucet is backed by a garantía limitada de por vida against leaks, drips, and finish defects to the original homeowner. For full warranty details, including terms, conditions, and limitations, please refer to the official Moen warranty documentation provided with your product or visit the official Moen websitio.
10. Atención al cliente
For further assistance, replacement parts, or warranty claims, please contact Moen customer service. You can find contact information and additional support resources on the official Moen websitiowww.moen.com).