AudioQuest NRGY2US01

Manual del usuario del cable de alimentación AudioQuest NRG-Y2

Model: NRGY2US01

1. Producto terminadoview

The AudioQuest NRG-Y2 Power Cable is designed to deliver clean and stable power to various electronic devices, enhancing their performance. It features a 1-meter length with a C7 connector for the device end and a 3-prong wall plug for the power source. This cable incorporates advanced technologies to minimize noise and distortion, ensuring optimal signal transfer.

  • Long Grain Copper: Minimizes distortion caused by grain boundaries within the conductor.
  • Semi-Solid Concentric Conductors: Strands are tightly packed and maintain position, reducing strand-interaction distortion.
  • Silver-Plated Drain Wires: Direction-controlled shield conductors efficiently drain RF noise to ground.
  • Noise-Dissipation Technology: Reduces interference for quieter backgrounds.
AudioQuest NRG-Y2 Power Cable with C7 and 3-prong connectors

Image 1.1: The AudioQuest NRG-Y2 Power Cable, showcasing its robust design and connectors.

2. Instrucciones de configuración

Follow these steps to properly connect your AudioQuest NRG-Y2 Power Cable:

  1. Identificar conectores: Locate the C7 connector (two-pin, figure-8 shape) and the 3-prong wall plug.
  2. Conectar al dispositivo: Insert the C7 connector firmly into the corresponding power inlet on your electronic device (e.g., DAC, powered speaker, game console, streamer). Ensure it is fully seated.
  3. Conectar a la toma de corriente: Insert the 3-prong wall plug into a standard, grounded AC power outlet. Ensure the connection is secure.
  4. Verificar conexión: Confirm both ends of the cable are securely connected before powering on your device.
Close-up of AudioQuest NRG-Y2 power cable connectors

Imagen 2.1: Detallada view of the C7 and 3-prong connectors for proper identification during setup.

3. Instrucciones de funcionamiento

The AudioQuest NRG-Y2 Power Cable operates passively by supplying power to your connected device. No specific operational steps are required for the cable itself beyond ensuring a secure and stable connection.

  • Ensure the cable is not bent or kinked sharply, which could damage the internal conductors.
  • Evite colocar objetos pesados ​​sobre el cable.
  • Confirm that the power outlet is functioning correctly and provides the appropriate voltage para su dispositivo.

4. Mantenimiento

Proper maintenance ensures the longevity and optimal performance of your power cable:

  • Limpieza: Utilice un paño suave y seco para limpiar con cuidado el cable y los conectores. No utilice limpiadores líquidos ni productos abrasivos.
  • Almacenamiento: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends. Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspección: Periodically inspect the cable for any signs of damage, such as cuts, fraying, or bent pins on the connectors. If damage is observed, discontinue use and replace the cable.

5. Solución de problemas

Si encuentra problemas, considere los siguientes pasos de solución de problemas:

  • No hay energía en el dispositivo:
    • Ensure both the C7 connector and the 3-prong wall plug are fully and securely inserted.
    • Test the power outlet with another device to confirm it is active.
    • Verifique si hay disyuntores disparados.
  • Energía intermitente:
    • Re-seat both connectors to ensure a firm connection.
    • Inspect the cable for any visible damage. A damaged cable may require replacement.

If problems persist after performing these steps, contact AudioQuest customer support for further assistance.

6. Especificaciones

CaracterísticaDetalle
Marcabúsqueda de audio
Número de modeloNRGY2US01
Género del conectorDe hombre a mujer
Formato de enchufeType A (3-prong wall plug)
Tipo de enchufeTipo A
Conector de dispositivoC7 (2-pole)
Longitud del artículo1 Meter (approximately 39.37 Inches)
ColorNegro
Quétage1560 vatios
Number Of Conductors7
Listado por UL
Código Postal092592003064

7. Información de garantía

The AudioQuest NRG-Y2 Power Cable is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official AudioQuest webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su comprobante de compra para validar la garantía.

8. Soporte

For additional assistance, technical support, or inquiries not covered in this manual, please visit the official AudioQuest website or contact their customer support team. You can typically find contact information and FAQs on their support pages.

AudioQuest oficial Websitio: www.audioquest.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.