• Menu for backlight
|FN+||∼||I11||Specific lights||Programming software definitions, first press in, second press out. Shutdown memory.|
|!1||Quick color||With every click RGB lights on the keyboard will loop and switch between |
red-green-blue-purple-green-white-off-sunset-relax; Shutdown memory.(sunset is warm colour,relax is cold colour,dynamically)
|@2||Meteor shower||First press for the single light meteor shower, second press for five lights meteor shower, third press for the exit. The background is chosen by specific lights and seven color switches; the time lights stranded are chosen by FN-F4—/—.; Shutdown memory.|
|#3||Ripple/Aurora||First press for ripple, second press for aurora, third press for exit; the background are chosen by specific lights and seven color switch; the time lights stranded are chosen by FNA-4-4—.., Shutdown memory.|
|$4||Breath||First press for single light breath(the background is chosen by specific lights and seven color switch), second press for seven lights loop switch breath, third press for exit; the frequency are chosen by FN-F4—/—.; Shutdown memory.|
|%5||Demo||Demonstrate all kinds of lights. Stop demo by FN+SPACE. The frequency is chosen by FN-F4—/-0; Shutdown memory.|
|9.||RI||Short press to backlight RI; Long press to backlight RI record.|
|*8||R2||Short press to backlight R2; Long press to backlight R2 record.|
|( 9||R3||Short press to backlight R3; Long press to backlight R3 record.|
|)0||R4||Short press to backlight R4; Long press to backlight R4 record.|
|— –||R5||Short press to backlight RI; Long press to backlight R5 record.|
|+=||R6||Short press to backlight R6; Long press to backlight R6 record.|
|F10||Backlight off||Open/Close backlight; Shutdown memory|
|↑||=||luminance +||Add luminance in 6 levels|
|↓||luminance –||Minus luminance in 6 levels,|
|←||Frequency +||Regulate the time of light effects in 5 levels|
|→||Frequency –||Regulate the time of light effects in 5 levels|
Special keys Function table
|FN+||ESC||Keyboard Lock||Lock/Open the keyboard; if the keyboard has been locked, it won’t react to the press. Shutdown doesn’t |
|L9||Adjust trigger point||Adjustable Trigger point (high/low stage) Shutdown doesn’t memory. Default in the fit trigger point.|
|L-Ctrl||Caps/Ctrl exchange||Press 3 seconds to Achieve the exchange between “left Ctrl” and “Caps”. The shutdown doesn’t memory|
|L At||Win/Mac||Press 3 seconds for indicator flash 2 times, Match Mac OS( Achieve the exchange between “left Win” and “Left Alt”, “Right Alt be a place of Right Win”,”Menu be a place of Right Alt”). Press 3 seconds for indicator Clash 1 time, match Win OS(key to return), Shutdown memory |
Note: LIn wired mode and match Mac OS, that is need waiting for some time.
2. If you want to open programming software, you need to match to Win OS(indicator flash 1 time), otherwise, you won’t be able to open the programming software.
※Press the ”M” Key to exchange Office mode and Program mode, ”M” Light is turned off at Office mode, and”M” Light is turned on in Program mode. Shutdown memory.
※Press the touch switch in the upper left corner to Lock/Open. Disable in Mac OS;Shutdown memory
USB, PS/2 Interface settings
Press “FN + Backspace” for 5 seconds, indicator flash 1 time to USB, indicator flash 2 times to auto-identify for USB, PS/2.and restart the keyboard. The default settings is set to USB.
Clear Key Counter
Press “ FN + Delete” for 5 seconds, the indicator flash, and the key counter will be clear.
Restore factory settings
Press “ESC + L-ctrl + F12+ R-ctrl” for 5seconds will restore factory settings, restore factory settings will restart keyboard.
There are two modes for the keyboard, OFFICE mode, and Custom mode. OFFICE mode is also Standard mode, as for Custom mode, you can make different configurations to the keyboard, the details for how to configure and save under custom mode are below.
※ NOTE： Press the “Save” on the main screen to save the configure when the configure be completed.
How to configure the backlight:
Single click the “LightSet” Key in the main screen of Programming software, and the dialog box of the “Backlight settings panel” will pop out. Single press the “Set All” key, choose the color in the dialog box of “color” that pops out, and confirm. Then fast set up all the key colors as the chosen color. Single press the “Multi key” key, and the dialog box of “Set Multi Key panel” will pop out, choose the key of needs to be set and it will show the chosen status. Then single press the “Set Color” key, choose the color in the dialog box of “color“ that pops out and confirm. Then set up many key colors as the chosen color. A single press on any key on the backlight interface, choose the color in the dialog box of “color” that pops out and confirm. Then fast set up the chosen key color as the chosen color.
Click into the “Program” Key after setting up the backlight, and finish the setup for the custom backlight.
Custom backlights are available under both modes. Exchange custom backlight and normal backlight with “FN+
How to configure the keyboard:
Under OFFICE mode, press the “M” key on the top right corner, and the “M” light turns on, then goes into custom mode. And goes into the OFFICE mode in the opposite way.
All keys on the keyboard are divided into the Top layer and the FN layer, FN layer can output only when combine with the FN key.
When finishing the set up of all keys in programming software, to save and synchronize the configuration with keys, single click the “WriteKeys” on the main screen. Single click the “Read configuration” on the main screen, it will read the standard configuration of OFFICE mode when under the OFFICE mode and read the custom configuration under custom mode.
When the “M” light is on, the keyboard is under the custom mode, and all the custom functions can be used.
2.1 single key/ combine keys
2.2 Macro definition
The keyboard can be defined in the overall definition under a custom mode showing a strong programmable feature.
What is Macro
Macro is the whole series of actions that you can specify the order to the keyboard. Accurately speaking, it’s a series of key press and key releases, recording every single time of the key’s press, release, and delay. Among these, it can automatically input when delayed, that is all the time between press and release can automatically input.
How to define a macro?
How to set up a delay
Delay is the time between the press and the release of keys. the keyboard has an automatic delay record and can modify delay time:
Set up automatic delay record: drive automatic records the time that typing actions need;
Modify delay time(50ms-60000ms, 1000ms=1s): after defining a macro, single click the delay time two keys already have, then the delay time will become to be editable and edit the delay time .sigle click the other area of the record list to exit the editable status.
How to insert mouse and delay
After recording a macro, right-click the key in the edit list, choose to operate insert mouse and delay.
2.3 Simulate keystroke
What is simulating keystroke?
Simulate keystroke is the function that after you click the simulate key, the keyboard will simulate the keystroke in a fast speed, it ends when the key bounce, it can also set up the speed of the keystroke.
How to set up a simulated keystroke?
The keyboard supports the usual function of multi-media, and custom multi-media simplifies the layout of the keyboard.
The keyboard support Mouse.
2.6 Function Key
The control key is divided into key function and backlight function.
The keyboard supports the power function.
2.8 Empty configuration
There are two circumstances for an empty configuration, one is an empty single key configuration, and the other is an empty all the configured keys. To empty a single key configuration, just single click the key and choose “Clear” in the settings window.
To empty all the configurations, single click “Clear” in the function bar on the main screen.
How to save and open configuration
Every configuration document corresponds to a kind of keystroke mode, so it will be more convenient for the users to configure the common programs of the keyboard. The configuration information includes key setup information and backlight setup information.
You can save those configurations that don’t need in a short time on your PC and direct import them next time when needed. This can avoid set up repeated. You can still import the documents saved on a PC when using another computer, The specific ways are below:
Open the configuration
How to Get key usage times
Single click “Get Counter” at the function bar on the main screen, after reading the completion, the mouse moves to the corresponding button position, and the information box can see the number of times the button is hit.
How to upgrade keyboard firmware
Upgrade keyboard firmware in order to improve the performance of the keyboard and the function that is designed for user experiences.
|EPOMAKER 108EC Electro-Capacitive Keyboard [pdf] User Manual|
108EC Electro-Capacitive Keyboard, 108EC, Electro-Capacitive Keyboard, Capacitive Keyboard, Keyboard
Rest Plus 2nd Gen Smart Do It All Sleep Device 3.5 in Meet your Hatch…
MaiA DS3 Stereo Box S3 BT Amplifiers INSTRUCTIONS FOR USE Pro-Ject MaiA DS3 Dear music…