EPEVER TCP 306
Overview
EPEVER TCP 306 is a serial device server connecting with EPEVER solar controller, inverter, and inverter/charger via an RS485 port.Communicating by the TCP network,it transfers collected data to the EPEVER cloud server to realize the remote monitoring, parameter setting, and data analysis. With simple and easy operations, the TCP device server’s IP address, TCP server, and TCP client can also be modified by the PC software.
Features
- Equipped with standard network cable port
- Adjustable 10M/100M Ethernet port
- Configurable serial port baud rate (600bps-230.4Kbps)
- Auto obtain the IP Address by the DHCP function
- High compatibility without any drivers
- Unlimited communication distance
- Flexible power supply for the communication interface
- Designed with low power consumption, and high running speed
Specifications
| Model | EPEVER TCP 306 |
| Work voltage | 5V~36VDC |
| Work current | 116mA@5V；53mA@12V |
| Ethernet type | Rj45, 10/100Mbps, cross-direct adaptive |
| Support network protocol | IP、TCP/UDP、ARP、ICMP、IPV4、HTTP |
| Serial port baud rate | 600bps~230.4Kbps |
| Transmission mode | TCP Server、TCP Client、UDP Server、UDP Client |
| Transmission delay | <10ms |
| Work temperature range | -25℃~75℃ |
| Storage temperature range | -40℃~105℃ |
| Relative humidity | ≤ 95% (N.C) |
| Dimension (Length x Width x Height) | 98.0mmx86.0mmx25.0mm |
| Reliable level | 1.5KV Electromagnetic isolation |
| Net Weight | 205g |
86-752-3889706
Huizhou Epever Technology Co., Ltd.
Documents / Resources
 | EPEVER TCP 306 [pdf] User Manual TCP 306, TCP, 306 |
