User Manual for SHANGKE GROUP models including: H510M-H V3, H510M-H V3 rev. 1.3 1.6 Key Features Motherboard, H510M-H V3, rev. 1.3 1.6 Key Features Motherboard, Key Features Motherboard, Motherboard
Nov 3, 2022 · Up to the USB 2.0 standard support, downward compatible with the USB1.1 standard. For connecting to the. USB TYPE A devices. A. B. C. D E 1. F.
MS-Challenger H510M-H V3 Manual VER:A1 Edit: November 3,2022 Editorial Department: Technology Department 1 Chapter I Motherboard configuration diagram (This drawing is for reference only, and some details will be designed and adjusted according to the actual situation. Please take the physical object, and our company reserves the right of interpretation) 2 Chapter II Specifications 2.1 motherboard hardware specifications Motherboard Micro ATX(225*180mm) size CPU Support for LGA 1200 slots The 11th generation and 10th generation processors TDP55W Chipset Intel ® H470 High-speed chipset Memory 2x DIMM DDR4 memory slots Maximum support total is 64GB Support for dual-channel memory technology Support for 2933 / 2666 / 2400 / 2133 MHz memory frequency Display Based on the display function of the integrated graphics card processor, the shared display memory technology is adopted 1x HDMI 1.4 port, up to 4096x2160@30Hz resolution (HDCP 2.2 support) 1x VGA port with maximum support of 1920 * 1200@60Hz resolution Extended 1x PCIE X16 3.0 slot port 1x PCIE X1 3.0 slot Support AMD and NVIDIA independent graphics card Audio Integrated CX20632 sound card chip Rear audio port: 1x rear on-board LINE IN port, 1x rear on-board LINE OUT port, and 1x rear on-board MIC_IN microphone port. F_A UDIO pin: 1x set of front microphone pins and 1x set of front audio output pins 1x 4-pin horn SPEAKER pins Network Integrated REALTEK 8111H Network Card chip (10 / 100 / 1000Mbit) 1x onboard RJ45 port Support network arousal Support PXE no disk, UEFI no disk guide Memory 1x M.2 slot (tight support 2242 / 2280 P CIE X4 / X2 channel SSD) 3x SATA 3.0 ports USB On-board rear port: 2x USB3.2 GEN 1 ports and 4x USB2.0 ports Plate insert: 1x (2) U SB2.0 pins, 1x (2) USB3.2 GEN 1 pins Inside board 1x 24-PIN motherboard ATX power supply port socket 1x 4-PIN motherboard A TX 12V power supply port, 12V input 1x COM_A pin 1x set of system fan pins and 1x group of CPU fan pins 1x CLR_CMOS pins 2x PS / 2 ports 1x Debug pin insert 1x ME protection pin 1x group chassis front control panel pin (F_PANEL) 3 Hardware monitoring Operating system ESD protect Voltage monitoring temperature monitoring Fan monitoring Intelligent fan speed control (the main board has been supported, the intelligent fan speed control also needs fan support) Support for Windows 10 64bit, Windows 11 64bit Support for Ubuntu 64bit Air discharge ± 8 KV Class C ± 6 KV of grade B Contact discharge is ± 6 KV Class C ± 3 KV Grade B * Test of the whole machine under good grounding A B F G1 G2 C D E 1 E 2 G3 A: PS / 2 port A keyboard or mouse used for connecting to the PS / 2 port B:VGA port Up to 1920x 1080@60Hz resolution support for connecting the display. C: HDMI port HDMI 2.0 port, up to 4096x2160@60Hz resolution (HDCP 2.2 support), used to connect the HDMI display port. D: USB 3.2 GEN 1 port Up to support theoretical 5Gb speed transmission, downward compatible with USB1.1 standard, for connecting USB TYPE A devices. E1: Double-layer USB 2.0 TYPE A port Up to the USB 2.0 standard support, downward compatible with the USB1.1 standard. For connecting to the USB TYPE A devices. E2: Double-layer USB 2.0 TYPE A port Up to the USB 2.0 standard support, downward compatible with the USB1.1 standard. For connecting to the USB TYPE A devices. 4 F: RJ45 port Network cable port for accessing the network cable to connect the host system to the network with a maximum bandwidth of 1000M bps. Connect the bandwidth indicator light tape width Connection-less 10M bps 100M bps 1000M bps The lamp state go out go out Green is always bright Orange is always bright Run the indicator light No data transmission go out In data transmission twinkle G1: Audio-in port (blue) For receiving audio input devices, such as mobile phone audio input. G2: Audio-out port (light green) Used to access audio output devices, such as headphones, speakers and other external playback devices. G3: Audio-Microphone port (pink) For access to audio input devices, such as microphone and other radio devices. 5 MS- H510M-H V3 VER:A1 2022 11 03 6 7 2.1 MicroATX(225*180mm) CPU LGA1200 11 10 TDP55W Intel®H470 2 DIMM DDR4 64GB 2933/2666/2400/2133MHz 1 HDMI1.4 4096x2160@30Hz HDCP2.2 1 VGA 1920*1200@60Hz 1 PCIEX16 3.0 1 PCIEX1 3.0 AMD NVidia DG1 CX20632 1 LINE IN 1 LINE OUT MIC_IN F_AUDIO 1 1 2 F_Aduio 1 4pin SPEAKER REALTEK8111H (10/100/1000Mbit) 1 RJ45 PXE UEFI 1 M,2 2242/2280 PCIE X4/X2 SSD SATA 3 SATA3.0 USB 2 USB3.2 GEN1 4 USB2.0 1 2 USB2.0 1 2 USB3.2 GEN1 1 24PIN ATX 1 4PIN ATX 12V 12V 1 COM_A 1 1 CPU 1 CLR_CMOS 2 PS/2 1 Debug 1 ME 1 F_PANEL 8 ESD Windows10 64bit Windows11 64bit Ubuntu 64bit ± 8KV C ±6KV B ± 6KV C ± 3KV B * A B F G1 G2 C D E1 E2 G3 APS/2 PS/2 B:VGA 1920x1080@60Hz C:HDMI HDMI2.0 4096x2160@60Hz HDCP2.2 HDMI DUSB3.2 GEN1 5Gb USB1.1 , USB TYPE A E1 USB2.0 TYPE A USB2.0 USB1.1 USB TYPE A E2 USB2.0 TYPE A USB2.0 USB1.1 USB TYPE A FRJ45 1000Mbps 9 10Mbps 100Mbps 1000Mbps G1: Audio-in () G2Audio-out G3Audio- 10Microsoft Word 2021